View ES3A_1237751.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

ES3A - ES3J Fast Rectifiers
December 2006
ES3A - ES3J
Fast Rectifiers
Features
* For surface mount applications. * Glass passivated junction. * Low profile package. * Easy pick and place. * Built-in strain relief. * Superfast recovery times for high efficiency.
SMB(DO-214AC) Color Band Denotes Cathode
Absolute Maximum Ratings *
Symbol
VRRM IF(AV) IFSM TJ, TSTG PD
Ta = 25C unless otherwise noted
Parameter
Maximum Repetitive Reverse Voltage Average Rectified Forward Current, .375" lead length @ TA=75C Non-repetitive Peak Forward Surge Current 8.3 ms Single Half-Sine-Wave Operating Junction and Storage Temperature Range Power Dissipation
Value ES3A
50
ES3B
100
ES3C
150 3.0 100 -50 to +150 1.66
ES3D
200
ES3J
600
Units
V A A C W
* These ratings are limiting values above which the serviceability of any semiconductor device may by impaired.
Thermal Characteristics
Symbol
RJA RJL
Parameter
Thermal Resistance, Junction to Ambient * Thermal Resistance, Junction to Lead *
Value
47 12
Units
C/W C/W
* Device mounted on FR-4 PCB 0.013 mm.
Electrical Characteristics
Symbol
VF Trr IR CT Forward Voltage
TC = 25C unless otherwise noted
Parameter
@ IF = 3.0 A Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A Reverse Current @ rated VR Total Capacitance VR = 4.0 V, f = 1.0 MHz TA = 25C TA = 100C
Value
0.95 20 10 500 45 1.7 35
Units
V ns uA pF
(c)2006 Fairchild Semiconductor Corporation
1
www.fairchildsemi.com
ES3A - ES3J Rev. F
ES3A - ES3J Fast Rectifiers
Typical Performance Characteristics
100
Forward Current, IF[A]
10
ES3A-ES3D
ES3J
1
0.1
TA=25 C Pulse Width = 300us 2% Duty Cycle
o
0.01 0.4
0.6
0.8
1.0
1.2
1.4
1.6
1.8
Forward Voltage Drop, VF[V]
Figure 1. Foward Current Deration Curve
Figure 2. Foward Voltage Characteristics
Figure 3. Total Capacitance
Figure 4. Reverse Current vs Reverse Voltage
50 NONINDUCTIVE
50 NONINDUCTIVE
+0.5A
trr
(-)
DUT
50V (approx)
50 NONINDUCTIVE
Pulse Generator (Note 2) (+)
OSCILLOSCOPE (Note 1)
0 -0.25A
-1.0A
NOTES: 1. Rise time = 7.0 ns max; Input impedance = 1.0 megaohm 22 pf. 2. Rise time = 10 ns max; Source impedance = 50 ohms.
1.0cm
SET TIME BASE FOR 5/ 10 ns/ cm
2 ES3A - ES3J Rev. F
www.fairchildsemi.com
ES3A - ES3J Fast Rectifiers
Package Dimensions
SMC / DO - 214AB

0LQLPXP 5HFRPPHQGHG /DQG 3DWWHUQ

Dimensions in Inches(Millimeters)
3 ES3A - ES3J Rev. F
www.fairchildsemi.com
ES3A - ES3J Fast Rectifiers ES3A - ES3J Fast Rectifiers
FAIRCHILD SEMICONDUCTOR TRADEMARKS
The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks.
ACExTM ActiveArrayTM BottomlessTM Build it NowTM CoolFETTM CROSSVOLTTM DOMETM EcoSPARKTM E2CMOSTM EnSignaTM FACT(R) FAST(R) FASTrTM FPSTM FRFETTM
FACT Quiet SeriesTM GlobalOptoisolatorTM GTOTM HiSeCTM I2CTM i-LoTM ImpliedDisconnectTM IntelliMAXTM ISOPLANARTM LittleFETTM MICROCOUPLERTM MicroFETTM MicroPakTM MICROWIRETM MSXTM MSXProTM Across the board. Around the world.TM The Power Franchise(R) Programmable Active DroopTM
OCXTM OCXProTM OPTOLOGIC(R) OPTOPLANARTM PACMANTM POPTM Power247TM PowerEdgeTM PowerSaverTM PowerTrench(R) QFET(R) QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM SerDesTM ScalarPumpTM
SILENT SWITCHER(R) SMART STARTTM SPMTM StealthTM SuperFETTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 SyncFETTM TCMTM TinyBoostTM TinyBuckTM TinyPWMTM TinyPowerTM TinyLogic(R) TINYOPTOTM TruTranslationTM UHC(R)
UniFETTM VCXTM WireTM
DISCLAIMER
FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS.
LIFE SUPPORT POLICY
FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
PRODUCT STATUS DEFINITIONS Definition of Terms
Datasheet Identification
Advance Information
Product Status
Formative or In Design
Definition
This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design.
Preliminary
First Production
No Identification Needed
Full Production
Obsolete
Not In Production
This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only.
Rev. I22
4 ES3A - ES3J Rev. F
www.fairchildsemi.com

▲Up To Search▲

Price & Availability of ES3A

	To Download ES3A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .