|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HD74LV2G74A Single D-type Flip Flops with Preset and Clear ADE-205-346C (Z) Rev.3 July 2001 Description The HD74LV2G74A has independent data, preset, clear, and clock inputs Q and Q outputs in a 8 pin package. The input data is transferred to the output at the rising edge of clock pulse CLK. Low voltage and high speed operation is suitable for the battery powered products (e.g., notebook computers), and the low power consumption extends the battery life. Features * The basic gate function is lined up as hitachi uni logic series. * Supplied on emboss taping for high speed automatic mounting. * Electrical characteristics equivalent to the HD74LV74A Supply voltage range : 1.65 to 5.5 V Operating temperature range : -40 to +85C * All inputs VIH (Max.) = 5.5 V (@VCC = 0 V to 5.5 V) All outputs VO (Max.) = 5.5 V (@VCC = 0 V) * Output current 6 mA (@VCC = 3.0 V to 3.6 V), 12 mA (@VCC = 4.5 V to 5.5 V) * All the logical input has hysteresis voltage for the slow transition. HD74LV2G74A Outline and Article Indication * HD74LV2G74A Index band Lot No. YMW L74 SSOP-8 Type No. Y : Year code (the last digit of year) M : Month code W : Week code Function Table Inputs PRE L H L H H H CLR H L L H H H CLK X X X D X X X H L X Outputs Q H L H H L Q0 *1 Q L H H L H Q0 *1 H : High level L : Low level X : Immaterial : Low to high transition : High to low transition Q0 : The level of Q immediately before the input conditions shown in the above table are determined. Note : 1. Q and Q will remain high as long as preset and clear are low, but Q and Q are unpredictable, if preset and clear go high simultaneously. Rev.3, Jul. 2001, page 2 of 12 HD74LV2G74A Pin Arrangement CLK 1 8 VCC D 2 7 PRE Q 3 6 CLR GND 4 5 Q (Top view) Rev.3, Jul. 2001, page 3 of 12 HD74LV2G74A Absolute Maximum Ratings Item Supply voltage range Input voltage range *1 *1, 2 Symbol VCC VI VO IIK IOK IO ICC or IGND PT Tstg Ratings -0.5 to 7.0 -0.5 to 7.0 -0.5 to VCC + 0.5 -0.5 to 7.0 -20 50 25 50 200 -65 to 150 Unit V V V mA mA mA mA mW C Test Conditions Output voltage range Input clamp current Output clamp current Output : H or L VCC : OFF VI < 0 VO < 0 or VO > VCC VO = 0 to VCC Continuous output current Continuous current through VCC or GND Maximum power dissipation *3 at Ta = 25C (in still air) Storage temperature Notes: The absolute maximum ratings are values which must not individually be exceeded, and furthermore no two of which may be realized at the same time. 1. The input and output voltage ratings may be exceeded if the input and output clamp-current ratings are observed. 2. This value is limited to 5.5 V maximum. 3. The maximum package power dissipation was calculated using a junction temperature of 150C. Rev.3, Jul. 2001, page 4 of 12 HD74LV2G74A Recommended Operating Conditions Item Supply voltage range Input voltage range Output voltage range Output current Symbol VCC VI VO IOL Min 1.65 0 0 -- -- -- -- IOH -- -- -- -- Input transition rise or fall rate t / v 0 0 0 0 Operating free-air temperature Ta -40 Note: Unused or floating inputs must be held high or low. Max 5.5 5.5 VCC 1 2 6 12 -1 -2 -6 -12 300 200 100 20 85 C ns / V Unit V V V mA VCC = 1.65 to 1.95 V VCC = 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V VCC = 1.65 to 1.95 V VCC = 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V VCC = 1.65 to 1.95 V VCC = 2.3 to 2.7 V VCC = 3.0 to 3.6 V VCC = 4.5 to 5.5 V Conditions Logic Diagram PRE CLK C C C Q TG C C C C D TG TG TG Q C CLR C C Rev.3, Jul. 2001, page 5 of 12 HD74LV2G74A Electrical Characteristic * Ta = -40 to 85C Item Input voltage Symbol VCC (V) * VIH 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 VIL 2.3 to 2.7 3.0 to 3.6 4.5 to 5.5 Hysteresis voltage VH 1.8 2.5 3.3 5.0 Output voltage VOH Min to Max 1.65 2.3 3.0 4.5 VOL Min to Max 1.65 2.3 3.0 4.5 Input current Quiescent supply current Output leakage current IIN ICC IOFF 0 to 5.5 5.5 0 3.3 Min VCCx0.7 VCCx0.7 VCCx0.7 -- -- -- -- -- -- -- VCC-0.1 1.4 2.0 2.48 3.8 -- -- -- -- -- -- -- -- -- Typ Max -- -- -- -- VCCx0.25 VCCx0.3 VCCx0.3 VCCx0.3 -- -- -- -- -- -- -- -- -- 0.1 0.3 0.4 0.44 0.55 1 10 5 -- A A A pF V IOH = -50 A IOH = -1 mA IOH = -2 mA IOH = -6 mA IOH = -12 mA IOL = 50 A IOL = 1 mA IOL = 2 mA IOL = 6 mA IOL = 12 mA VIN = 5.5 V or GND VIN = VCC or GND, IO = 0 VIN or VO = 0 to 5.5 V Unit V Test condition 1.65 to 1.95 VCCx0.75 -- -- -- -- -- -- -- -- 0.25 0.30 0.35 0.45 -- -- -- -- -- -- -- -- -- -- -- -- -- 2.5 1.65 to 1.95 -- V VT - VT + - Input capacitance CIN VIN = VCC or GND Note: For conditions shown as Min or Max, use the appropriate values under recommended operating conditions. Rev.3, Jul. 2001, page 6 of 12 HD74LV2G74A Switching Characteristics * VCC = 1.8 0.15 V Item Symbol Ta = 25C Min Maximum clock fmax frequency Ta = -40 to 85C Unit Test FROM TO (Output) Typ 60 40 16.3 17.9 21.6 24.5 -- -- -- -- -- Max -- -- 27.0 29.0 34.0 39.5 -- -- -- -- -- Min 20 15 1.0 1.0 1.0 1.0 14.0 9.0 0.5 13.0 13.0 Max -- -- 29.0 32.0 36.5 42.5 -- -- -- -- -- ns ns ns ns Conditions (Input) MHz CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF 30 20 -- -- -- -- Propagation delay time tPLH tPHL PRE/CLR Q or Q CLK PRE/CLR Q or Q CLK D PRE or CLR inactive Setup time Hold time Pulse width tsu th tw 13.0 9.0 0.5 12.0 12.0 PRE or CLR "L" CLK "H" or "L" * VCC = 2.5 0.2 V Item Symbol Ta = 25C Min Maximum clock fmax frequency Ta = -40 to 85C Unit Test FROM TO (Output) Typ 100 70 9.8 11.1 13.0 14.2 -- -- -- -- -- Max -- -- 14.8 16.4 17.4 20.0 -- -- -- -- -- Min 40 25 1.0 1.0 1.0 1.0 9.0 7.0 0.5 9.0 9.0 Max -- -- 17.0 19.0 20.0 23.0 -- -- -- -- -- ns ns ns ns Conditions (Input) MHz CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF 50 30 -- -- -- -- Propagation delay time tPLH tPHL PRE/CLR Q or Q CLK PRE/CLR Q or Q CLK D PRE or CLR inactive Setup time Hold time Pulse width tsu th tw 8.0 7.0 0.5 8.0 8.0 PRE or CLR "L" CLK "H" or "L" Rev.3, Jul. 2001, page 7 of 12 HD74LV2G74A Switching Characteristics (cont) * VCC = 3.3 0.3 V Item Symbol Ta = 25C Min Maximum clock fmax frequency Ta = -40 to 85C Unit Test FROM TO (Output) Typ 140 90 6.9 7.9 9.2 10.2 -- -- -- -- -- Max -- -- 12.3 11.9 15.8 15.4 -- -- -- -- -- Min 70 45 1.0 1.0 1.0 1.0 7.0 5.0 0.5 7.0 7.0 Max -- -- 14.5 14.0 18.0 17.5 -- -- -- -- -- ns ns ns ns Conditions (Input) MHz CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF 80 50 -- -- -- -- Propagation delay time tPLH tPHL PRE/CLR Q or Q CLK PRE/CLR Q or Q CLK D PRE or CLR inactive Setup time Hold time Pulse width tsu th tw 6.0 5.0 0.5 6.0 6.0 PRE or CLR "L" CLK "H" or "L" * VCC = 5.0 0.5 V Item Symbol Ta = 25C Min Maximum clock fmax frequency Ta = -40 to 85C Unit Test FROM TO (Output) Typ 180 140 5.0 5.6 6.6 7.2 -- -- -- -- -- Max -- -- 7.7 7.3 9.7 9.3 -- -- -- -- -- Min 110 75 1.0 1.0 1.0 1.0 5.0 3.0 0.5 5.0 5.0 Max -- -- 9.0 8.5 11.0 10.5 -- -- -- -- -- ns ns ns ns Conditions (Input) MHz CL = 15 pF CL = 50 pF CL = 15 pF CL = 50 pF 130 90 -- -- -- -- Propagation delay time tPLH tPHL PRE/CLR Q or Q CLK PRE/CLR Q or Q CLK D PRE or CLR inactive Setup time Hold time Pulse width tsu th tw 5.0 3.0 0.5 5.0 5.0 PRE or CLR "L" CLK "H" or "L" Rev.3, Jul. 2001, page 8 of 12 HD74LV2G74A Operating Characteristics * CL = 50 pF Item Symbol VCC (V) 3.3 5.0 Ta = 25C Min Power dissipation capacitance CPD -- -- Typ 13.0 14.0 Max -- -- pF f = 10 MHz Unit Test Conditions Test Circuit VCC Input PRE D Input Q CL Output Q VCC Pulse Generator Zout = 50 Pulse Generator Zout = 50 CLK CLR Q CL Output Q Notes: 1. C L includes probe and jig capacitance. 2. Test is put into the each flip flops. Rev.3, Jul. 2001, page 9 of 12 HD74LV2G74A * Waveform - 1 tr 90 % 50 % 10 % t su th 90 % 10 % tf VCC 0V Timming input Data input VCC 50 % tw VCC 50 % 0V Input 50 % 50 % 0V * Waveform - 2 tr 90 % 50 % 90 % 50 % tf VCC 10 % t PLH t PHL 0V Input 10 % VOH Same-phase output t PHL 50 % t PLH VOH Opposite-phase output 50 % 50 % VOL 50 % VOL Notes: 1. Input waveform : PRR 1 MHz, Zo = 50 , tr 3 ns, tf 3 ns. 2. The output are measured one at a time with one transition per measurement. Rev.3, Jul. 2001, page 10 of 12 HD74LV2G74A Package Dimensions 1.50 As of January, 2001 (0.4) + 0.05 0.13 - 0.03 0.5 0.5 0.5 Unit: mm 0 - 0.1 2.3 0.1 8 - 0.2 - 0.04 2.0 0.1 + 0.05 (0.17) (0.4) 0.7 0.1 3.1 0.1 Hitachi Code JEDEC EIAJ Mass (reference value) TTP-8DB 0.25 g Rev.3, Jul. 2001, page 11 of 12 HD74LV2G74A Disclaimer 1. Hitachi neither warrants nor grants licenses of any rights of Hitachi's or any third party's patent, copyright, trademark, or other intellectual property rights for information contained in this document. Hitachi bears no responsibility for problems that may arise with third party's rights, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design, purchase or use. 3. Hitachi makes every attempt to ensure that its products are of high quality and reliability. However, contact Hitachi's sales office before using the product in an application that demands especially high quality and reliability or where its failure or malfunction may directly threaten human life or cause risk of bodily injury, such as aerospace, aeronautics, nuclear power, combustion control, transportation, traffic, safety equipment or medical equipment for life support. 4. Design your application so that the product is used within the ranges guaranteed by Hitachi particularly for maximum rating, operating supply voltage range, heat radiation characteristics, installation conditions and other characteristics. Hitachi bears no responsibility for failure or damage when used beyond the guaranteed ranges. Even within the guaranteed ranges, consider normally foreseeable failure rates or failure modes in semiconductor devices and employ systemic measures such as failsafes, so that the equipment incorporating Hitachi product does not cause bodily injury, fire or other consequential damage due to operation of the Hitachi product. 5. This product is not designed to be radiation resistant. 6. No one is permitted to reproduce or duplicate, in any form, the whole or part of this document without written approval from Hitachi. 7. Contact Hitachi's sales office for any questions regarding this document or Hitachi semiconductor products. Sales Offices Hitachi, Ltd. Semiconductor & Integrated Circuits Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Tel: (03) 3270-2111 Fax: (03) 3270-5109 URL NorthAmerica Europe Asia Japan : : : : http://semiconductor.hitachi.com/ http://www.hitachi-eu.com/hel/ecg http://sicapac.hitachi-asia.com http://www.hitachi.co.jp/Sicd/indx.htm Hitachi Asia Ltd. Hitachi Tower 16 Collyer Quay #20-00 Singapore 049318 Tel : <65>-538-6533/538-8577 Fax : <65>-538-6933/538-3877 URL : http://www.hitachi.com.sg Hitachi Asia Ltd. (Taipei Branch Office) 4/F, No. 167, Tun Hwa North Road Hung-Kuo Building Taipei (105), Taiwan Tel : <886>-(2)-2718-3666 Fax : <886>-(2)-2718-8180 Telex : 23222 HAS-TP URL : http://www.hitachi.com.tw Hitachi Asia (Hong Kong) Ltd. Group III (Electronic Components) 7/F., North Tower World Finance Centre, Harbour City, Canton Road Tsim Sha Tsui, Kowloon Hong Kong Tel : <852>-(2)-735-9218 Fax : <852>-(2)-730-0281 URL : http://semiconductor.hitachi.com.hk For further information write to: Hitachi Semiconductor (America) Inc. 179 East Tasman Drive San Jose,CA 95134 Tel: <1> (408) 433-1990 Fax: <1>(408) 433-0223 Hitachi Europe Ltd. Electronic Components Group Whitebrook Park Lower Cookham Road Maidenhead Berkshire SL6 8YA, United Kingdom Tel: <44> (1628) 585000 Fax: <44> (1628) 585200 Hitachi Europe GmbH Electronic Components Group Dornacher Strae 3 D-85622 Feldkirchen, Munich Germany Tel: <49> (89) 9 9180-0 Fax: <49> (89) 9 29 30 00 Copyright (c) Hitachi, Ltd., 2001. All rights reserved. Printed in Japan. Colophon 4.0 Rev.3, Jul. 2001, page 12 of 12 |
Price & Availability of HD74LV2G74A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |