 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HMC-C041 v00.0307 GaAs MMIC I/Q MIXER MODULE 6 - 10 GHz Features Wide IF Bandwidth: DC - 3.5 GHz Image Rejection: 35 dB LO to RF Isolation: 45 dB High Input IP3: +25 dBm Hermetically Sealed Module Typical Applications Field Replaceable SMA Connectors -55 to +85 C Operating Temperature 5 MIXERS The HMC-C041 is ideal for: * Point-to-Point Radios * Point-to-Multi-Point Radios & VSAT * Test Equipment & Sensors * Military End-Use General Description The HMC-C041 is a passive I/Q MMIC mixer housed in a miniature hermetic module which can be used as either an Image Reject Mixer or a Single Sideband Upconverter. The module utilizes two standard Hittite double balanced mixer cells and a 90 degree hybrid fabricated on a GaAs MESFET process. A low frequency quadrature hybrid was used to produce a 100 MHz USB IF output. This MMIC based module is a more reliable and consistent alternative to hybrid style I/Q Mixers and Single Sideband Converter assemblies. The module features removable SMA connectors which can be detached to allow direct connection of the I/O pins to a microstrip or coplanar circuit. Functional Diagram Electrical Specifications, TA = +25 C, IF= 100 MHz, LO = +19 dBm* Parameter Frequency Range, RF/LO Frequency Range, IF Conversion Loss (As IRM) Image Rejection 1 dB Compression (Input) LO to RF Isolation LO to IF Isolation IP3 (Input) Amplitude Balance Phase Balance * Unless otherwise noted, all measurements performed as downconverter. 35 20 20 Min. Typ. 6 - 10 DC - 3.5 7.5 35 +17 45 25 +25 0.5 5 10 Max. Units GHz GHz dB dB dBm dB dB dBm dB Deg 5 - 28 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC-C041 v00.0307 GaAs MMIC I/Q MIXER MODULE 6 - 10 GHz Data taken As IRM With External IF Hybrid Conversion Gain vs. Temperature 0 Image Rejection vs. Temperature 60 50 CONVERSION GAIN (dB) -5 IMAGE REJECTION (dB) 40 30 20 10 0 +25C +85C -55C -10 -15 +25C +85C -55C -20 5 6 7 8 9 10 11 RF FREQUENCY (GHz) 5 6 7 8 9 10 11 5 MIXERS RF FREQUENCY (GHz) Conversion Gain vs. LO Drive 0 -5 CONVERSION GAIN (dB) Return Loss 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 RF LO -10 -15 -20 -25 -30 5 6 7 8 9 10 11 RF FREQUENCY (GHz) +15dBm +17dBm +19dBm +21dBm 5 6 7 8 9 10 11 FREQUENCY (GHz) Input P1dB vs. Temperature 24 22 20 P1dB (dBm) 18 16 14 12 10 5 6 7 8 9 10 11 RF FREQUENCY (GHz) Input IP3 vs. LO Drive 35 30 25 IP3 (dBm) 20 15 10 5 0 5 6 7 8 9 10 11 RF FREQUENCY (GHz) LO = +15 dBm LO = +17 dBm LO = +19 dBm LO = +21 dBm +25C +85C -55C For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 5 - 29 HMC-C041 v00.0307 GaAs MMIC I/Q MIXER MODULE 6 - 10 GHz Quadrature Channel Data Taken Without IF Hybrid Isolations 0 -10 ISOLATION (dB) -20 -30 -40 -50 LO/RF RF/IF1 LO/IF1 RF/IF2 LO/IF2 IF Bandwidth* 0 -5 RESPONSE (dB) -10 -15 CONVERSION GAIN RETURN LOSS 5 MIXERS -60 5 6 7 8 9 10 11 RF FREQUENCY (GHz) -20 0.5 1 1.5 2 2.5 3 3.5 IF FREQUENCY (GHz) Amplitude Balance vs. LO Drive 8 6 AMPLITUDE BALANCE (dB) 4 2 0 -2 -4 -6 -8 5 6 7 8 9 10 11 RF FREQUENCY (GHz) LO = +15dBm LO = +17dBm LO = +19dBm LO = +21dBm Phase Balance vs. LO Drive 15 10 5 0 -5 -10 -15 -20 5 6 7 8 9 10 11 RF FREQUENCY (GHz) LO = +15dBm LO = +17dBm LO = +19dBm LO = +21dBm Upconverter Performance Conversion Gain vs. LO Drive* 0 Upconverter Performance Sideband Rejection vs. LO Drive* 0 SIDEBAND REJECTION (dBc) -10 -20 -30 -40 -50 -60 LO = +15 dBm LO = +17 dBm LO = +19 dBm LO = +21 dBm CONVERSION GAIN (dB) -5 -10 -15 LO = +15dBm LO = +17dBm LO = +19dBm LO = +21dBm -20 5 6 7 8 9 10 11 RF FREQUENCY (GHz) PHASE BALANCE (degrees) 5 6 7 8 9 10 11 RF FREQUENCY (GHz) * Conversion gain data taken with external IF hybrid 5 - 30 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC-C041 v00.0307 GaAs MMIC I/Q MIXER MODULE 6 - 10 GHz MxN Spurious Outputs Harmonics of LO nLO Spur at RF Port LO Freq. (GHz) 1 3.5 6.5 7.5 8.5 9.5 10.5 39 43 51 56 47 45 2 40 49 65 61 57 55 3 52 51 53 56 65 59 4 51 70 62 50 63 46 nLO mRF 0 1 2 3 4 0 xx 33 99 97 99 1 10 0 71 101 98 2 29 46 75 100 98 3 18 77 70 86 102 4 51 68 99 101 107 RF = 7.6 GHz @ -10 dBm LO = 7.5 GHz @ +19 dBm Data taken without IF hybrid All values in dBc below IF power level LO = +19 dBm Values in dBc below input LO level measured at RF Port. 5 MIXERS 5 - 31 Absolute Maximum Ratings RF / IF Input LO Drive Channel Temperature Continuous Pdiss (T=85C) (derate 7.8 mW/C above 85C) Thermal Resistance (RTH) (junction to die bottom) Storage Temperature Operating Temperature +20 dBm +27 dBm 150C 507 mW 128 C/W -65 to +150 C -55 to +85 C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC-C041 v00.0307 GaAs MMIC I/Q MIXER MODULE 6 - 10 GHz Outline Drawing 5 MIXERS Typical Package Weight Package Spacer +/- 1 gms Tolerance 20.0 gms 2.6 gms NOTES: 1. PACKAGE, LEADS, COVER MATERIAL: KOVARTM 2. PLATING: ELECTROLYTIC GOLD 50 MICROINCHES MIN., OVER ELECTROLYTIC NICKEL 75 MICROINCHES MIN. 3. SPACER MATERIAL: NICKEL PLATED ALUMINUM 4. ALL DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. TOLERANCES 0.010 [0.25] UNLESS OTHERWISE SPECIFIED. 6. FIELD REPLACEABLE SMA CONNECTORS. TENSOLITE 5602-5CCSF OR EQUIVALENT. 5 - 32 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com HMC-C041 v00.0307 GaAs MMIC I/Q MIXER MODULE 6 - 10 GHz Pin Descriptions Pin Number 1 Function RF Description This pin is AC coupled and matched to 50 Ohms from 6 to 10 GHz. This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/ sink more than 3mA of current or part non-function and possible part failure will result. This pin is AC coupled and matched to 50 Ohms from 6 to 10 GHz. Interface Schematic 2 IF1 3 IF2 5 MIXERS 4 LO For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 5 - 33 |
Price & Availability of HMC-C041
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |