View HOA1888-013_1250939.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Infrared Assemblies Wide Gap Transmissive Sensor
HOA1888 Series
FEATURES * Choice of phototransistor or photodarlington output * Visible ambient light and dust protective filter * 12 mm (0.47 in.) slot width * Snap-in housing
The HOA1888 Series consists of an infrared emitting diode facing an NPN silicon phototransistor (HOA1888-011) or photodarlington (HOA1888-013) encased in a black thermoplastic housing. Detector switching takes place whenever an opaque object passes through the slot between emitter and detector. Both emitter and detector have 1,52 mm (0.060 in.) x 1,52 mm (0.060 in.) vertical apertures. The sensor housing contains IR (Infrared) transmissive optical windows. This arrangement provides excellent protection against visible ambient light while eliminating aperture openings which could be clogged by airborne contaminants. Housing material is polycarbonate. Housings are soluble in chlorinated hydrocarbons and ketones. Recommended cleaning agents are methanol and isopropanol.
Honeywell Sensing and Control
Infrared Assemblies Wide Gap Transmissive Sensor
ABSOLUTE MAXIMUM RATINGS (25C free-air temperature unless otherwise noted)
Operating Temperature Range Storage Temperature Range Soldering Temperature (5 sec) IR EMITTER Power Dissipation Reverse Voltage Continuous Forward Current DETECTOR Collector-Emitter Voltage Emitter Collector Voltage Power Dissipation 100 mW 3V 50 mA TRANSISTOR 30 V 5V 100 mW
(1) (1)
HOA1888 Series
CAUTION
STRESS DAMAGE Functional operation of the device at or above "Absolute Maximum Ratings" for extended periods of time may affect reliability. Failure to comply with these instructions may result in product damage.
-40C to 85C -40C to 85C 240C
DARLINGTON 15 V 5V 100 mW 30 mA
(1)
Collector DC Current 30 mA Note: 1. Derate linearly at 0.78 mW/C above 25C.
ELECTRICAL CHARACTERISTICS (25C unless otherwise noted)
Parameter IR EMITTER Forward Voltage Reverse Leakage Current DETECTOR Collector-Emitter Breakdown Voltage HOA1888-011 HOA1888-013 Emitter-Collector Breakdown Voltage Collector Dark Current HOA1888-011 HOA1888-013 COUPLED CHARACTERISTICS On-State Collector Current HOA1888-011 HOA1888-013 Collector-Emitter Saturation Voltage HOA1888-011 HOA1888-013 Rise And Fall Time HOA1888-011 HOA1888-013 IC(ON) 0.5 2.0 VCE(SAT) 0.4 1.1 tr , t f 15 75 s V mA VCE=5 V IF=20 mA IF=20 mA IC=60 A IC=250 A VCC=5 V, IC=1 mA RL=1000 RL=100 V(BR)CEO 30 15 V(BR)ECO ICEO 100 250 5.0 V nA IE=100 A VCE=10 V IF=0 V IC=100 A VF IR 1.6 10 V A IF=20 mA VR=3 V Symbol Min Typ Max Unit Test Condition
2 Honeywell *Sensing and Control
For application help: call 1-800-537-6945
Infrared Assemblies Wide Gap Transmissive Sensor
SCHEMATIC
HOA1888 Series
Figure 1: IRED Forward Bias Characteristics
Figure 2: Non-saturated Switching Time vs Load Resistance
1000
100 90 80 70 60 50 40 30 20 10 0 0.8
Forward current - mA
Response time - s
Pulsed condition TA = 80 C TA = 25 C TA = -40 C
1.0 1.2 1.4 1.6 1.8 2.0
100
Photodarlington
10
Phototransistor
1 10 100 1000 10000
Forward voltage - V
Load resistance - Ohms
Figure 3: Detector Dark Current vs Temperature
Figure 4: Collector Current vs Ambient Temperature
Normalized collector current
1.2 1.0 0.8 0.6 0.4 0.2 0.0 -50 -25 0 25 50 75 100
Free-air temperature - C
For application help: call 1-800-537-6945
Honeywell * Sensing and Control 3
Infrared Assemblies Wide Gap Transmissive Sensor
ORDER GUIDE
Catalog Listing HOA1888-011 HOA1888-013 Description Wide Gap Transmissive Sensor, Phototransistor Wide Gap Transmissive Sensor, Photodarlington
HOA1888 Series
OUTLINE DIMENSIONS mm (in.) (for reference only)
35 (1.378) 11,5 (.453) 12 (.472) 5,5 (.216) 6,9 (.271) 3,8 (.150) OPTICAL C L
RECOMMENDED PCB MOUNTING HOLE DIMENSIONS mm (in.)
2,54 (.100) (2X)
(5X) 1,0 (.04) dia.
(2X) 2,8 (.110) dia.
13 (.512) 10 (.394) OPTICAL C L
0,7 (.027)
4,4 (.173) 3 (.118)
3,3 (.13) 5X
3,6 (.142)
2,8 (.110) 1,4 (.055)
(2x) 4,8 (.189) (2X) 19,4 (.764) 29 (1.142)
29 .1 (1.142)
3 (.118)
12 (.472)
3 2,54 (.100) 4 19,4 (.764)
1 2 3,8 .1 (.150)
LEADS: 1. ANODE 3. EMITTER 2. CATHODE 4. COLLECTOR
2x 7,8 .1 (.307)
WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective material and faulty workmanship. Contact your local sales office for warranty information. If warranted goods are returned to Honeywell during that period of coverage, Honeywell will repair or replace without charge those items it finds defective. The foregoing is Buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. While we provide application assistance, personally, through our literature, and through the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change at any time without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use.
SALES AND SERVICE MICRO SWITCH Sensing and Control serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call: TELEPHONE 1-800-537-6945 (USA) 1-800-737-3360 (Canada) 1-815-235-6847 (International) FAX 1-815-235-6545 (USA) INTERNET www.honeywell.com/sensing info@micro.honeywell.com
Sensing and Control Honeywell Inc. 11 West Spring Street Freeport, Illinois 61032
Printed with Soy Ink on 50% Recycled Paper
www.honeywell.com/sensing
006455-1-EN IL50 GLO 1298 Printed in USA

▲Up To Search▲

Price & Availability of HOA1888-013

	To Download HOA1888-013 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .