View IRGP4065DPBF_1256475.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PD - 97101
IRGP4065DPBF
PDP TRENCH IGBT
Features l Advanced Trench IGBT Technology l Optimized for Sustain and Energy Recovery Circuits in PDP Applications TM) l Low VCE(on) and Energy per Pulse (EPULSE for Improved Panel Efficiency l High Repetitive Peak Current Capability l Lead Free Package
Key Parameters
VCE min VCE(ON) typ. @ IC = 70A IRP max @ TC= 25C c TJ max
C
300 1.75 205 150
C
V V A C
G
E G
E
C
n-channel
G G ate C C ollector
TO-247AC
E E m itter
Description This IGBT is specifically designed for applications in Plasma Display Panels. This device utilizes advanced trench IGBT technology to achieve low VCE(on) and low EPULSETM rating per silicon area which improve panel efficiency. Additional features are 150C operating junction temperature and high repetitive peak current capability. These features combine to make this IGBT a highly efficient, robust and reliable device for PDP applications.
Absolute Maximum Ratings
Parameter
VGE IC @ TC = 25C IC @ TC = 100C IRP @ TC = 25C PD @TC = 25C PD @TC = 100C TJ TSTG Gate-to-Emitter Voltage Continuous Collector Current, VGE @ 15V Continuous Collector, VGE @ 15V Repetitive Peak Current c Power Dissipation Power Dissipation Linear Derating Factor Operating Junction and Storage Temperature Range Soldering Temperature for 10 seconds Mounting Torque, 6-32 or M3 Screw 300 10lbxin (1.1Nxm) N
Max.
30 70 40 205 160 63 1.3 -40 to + 150
Units
V A
W W/C C
Thermal Resistance
Parameter
RJC (IGBT) RJC (Diode)
RCS RJA
Typ.
--- 1.45 0.24 --- 6.0 (0.21)
Max.
0.80 2.5 --- 40 ---
Units
Thermal Resistance Junction-to-Case-(each IGBT) d Thermal Resistance Junction-to-Case-(each Diode) d Case-to-Sink (flat, greased surface) Junction-to-Ambient (typical socket mount) d Weight
C/W g (oz)
www.irf.com
1
6/13/06
IRGP4065DPBF
Electrical Characteristics @ TJ = 25C (unless otherwise specified)
Parameter
BVCES VCES/TJ Collector-to-Emitter Breakdown Voltage Breakdown Voltage Temp. Coefficient
Min.
300 --- --- --- --- --- --- 2.6 --- --- --- --- --- --- --- --- -- -- -- -- -- -- -- -- 100 --- ---
Typ. Max. Units
--- 0.23 1.20 1.35 1.75 2.35 2.00 --- -11 2.0 50 --- --- 26 62 20 30 26 170 160 30 28 250 310 --- 875 975 2200 110 55 5.0 13 --- --- 1.40 --- 2.10 --- --- 5.0 --- 25 --- 100 -100 --- --- --- -- -- -- -- -- -- -- -- --- --- --- --- --- --- --- --- pF V V/C
Conditions
VGE = 0V, ICE = 1 mA Reference to 25C, ICE = 1mA VGE = 15V, ICE = 25A VGE = 15V, ICE = 40A VGE = 15V, ICE = 70A VGE = 15V, ICE = 120A VGE = 15V, ICE = 70A, TJ = 150C VCE = VGE, ICE = 500A
VCE(on)
Static Collector-to-Emitter Voltage
V
e e e e
VGE(th) VGE(th)/TJ ICES IGES gfe Qg Qgc td(on) tr td(off) tf td(on) tr td(off) tf tst EPULSE
Gate Threshold Voltage Gate Threshold Voltage Coefficient Collector-to-Emitter Leakage Current Gate-to-Emitter Forward Leakage Gate-to-Emitter Reverse Leakage Forward Transconductance Total Gate Charge Gate-to-Collector Charge Turn-On delay time Rise time Turn-Off delay time Fall time Turn-On delay time Rise time Turn-Off delay time Fall time Shoot Through Blocking Time Energy per Pulse
V mV/C A VCE = 300V, VGE = 0V VCE = 300V, VGE = 0V, TJ = 150C nA VGE = 30V VGE = -30V VCE = 25V, ICE = 25A S nC VCE = 200V, IC = 25A, VGE = 15Ve IC = 25A, VCC = 180V RG = 10, L=200H, LS= 150nH TJ = 25C IC = 25A, VCC = 180V RG = 10, L=200H, LS= 150nH TJ = 150C VCC = 240V, VGE = 15V, RG= 5.1 L = 220nH, C= 0.40F, VGE = 15V VCC = 240V, RG= 5.1, TJ = 25C L = 220nH, C= 0.40F, VGE = 15V VCC = 240V, RG= 5.1, TJ = 100C VGE = 0V VCE = 30V = 1.0MHz, See Fig.13 Between lead, 6mm (0.25in.) from package and center of die contact
ns
ns
ns J
Ciss Coss Crss LC LE
Input Capacitance Output Capacitance Reverse Transfer Capacitance Internal Collector Inductance Internal Emitter Inductance
--- --- --- --- ---
nH
Diode Characteristics @ TJ = 25C (unless otherwise specified)
Parameter
IF(AV) IFSM VF trr Average Forward Current at TC=155C Non Repetitive Peak Surge Current Forward Voltage Reverse Recovery Time
Min.
--- --- --- --- --- --- --- --- --- --- ---
Typ. Max. Units
--- --- 1.0 0.83 --- 27 40 30 106 2.2 5.3 8.0 100 1.25 1.0 35 --- --- --- --- --- --- A A V ns
Conditions
Qrr Irr
Reverse Recovery Charge Peak Recovery Current
nC A
TJ = 155C, PW = 6.0ms half sine wave IF = 8A IF = 8A, TJ = 125C IF = 1A, di/dt = -50A/s, VR =30V TJ = 25C TJ = 125C IF = 8A TJ = 25C di/dt = 200A/s TJ = 125C VR = 200V TJ = 25C TJ = 125C
Notes: Half sine wave with duty cycle = 0.25, ton=1sec. R is measured at TJ of approximately 90C.
Pulse width 400s; duty cycle 2%.
2
www.irf.com
IRGP4065DPBF
200
200
160
TOP
ICE (A)
BOTTOM
ICE (A)
120
V = 18V GE V = 15V GE V = 12V GE V = 10V GE V = 8.0V GE V = 6.0V GE
160
TOP V = 18V GE V = 15V GE V = 12V GE V = 10V GE V = 8.0V GE V = 6.0V GE
120
BOTTOM
80
80
40
40
0 0 2 4 6 8 10 12 14 16 VCE (V)
0 0 2 4 6 8 10 12 14 16 VCE (V)
Fig 1. Typical Output Characteristics @ 25C
280
TOP V = 18V GE V = 15V GE V = 12V GE V = 10V GE V = 8.0V GE V = 6.0V GE
Fig 2. Typical Output Characteristics @ 75C
360
TOP V = 18V GE V = 15V GE V = 12V GE V = 10V GE V = 8.0V GE V = 6.0V GE
240 200
ICE (A)
BOTTOM
320 280 240
ICE (A)
BOTTOM
160 120 80 40 0 0 2 4 6 8 10 12 14 16 VCE (V)
200 160 120 80 40 0 0 2 4 6 8 10 12 14 16 VCE (V)
Fig 3. Typical Output Characteristics @ 125C
600
ICE, Collector-to-Emitter Current (A)
Fig 4. Typical Output Characteristics @ 150C
20
IC = 25A
500 15 400 300 200 5 100 0 0 5 10 15 20 VGE, Gate-to-Emitter Voltage (V) 0 0 5 10 VGE (V) 15 20 TJ = 25C TJ = 150C T J = 25C T J = 150C
VCE (V)
10
Fig 5. Typical Transfer Characteristics
Fig 6. VCE(ON) vs. Gate Voltage
www.irf.com
3
IRGP4065DPBF
80 70
IC, Collector Current (A)
220 200
Repetitive Peak Current (A)
180 160 140 120 100 80 60 40 20 0
ton= 1s Duty cycle = 0.25 Half Sine Wave
60 50 40 30 20 10 0 0 25 50 75 100 125 150
25
50
75
100
125
150
Fig 7. Maximum Collector Current vs. Case Temperature
1000 V CC = 240V 900
Energy per Pulse (J)
T C, Case Temperature (C)
Case Temperature (C)
Fig 8. Typical Repetitive Peak Current vs. Case Temperature
1000 L = 220nH C = 0.4F 100C
L = 220nH C = variable
900
Energy per Pulse (J)
100C
800 700 600 500 400 300 200
800 700 600 500 400 160 170 180 190 200 210 220 230 25C
25C
150 160 170 180 190 200 210 220 230 240 VCE, Collector-to-Emitter Voltage (V)
IC, Peak Collector Current (A)
Fig 9. Typical EPULSE vs. Collector Current
1400 V CC = 240V 1200
Energy per Pulse (J)
Fig 10. Typical EPULSE vs. Collector-to-Emitter Voltage
1000 OPERATION IN THIS AREA LIMITED BY V CE(on)
L = 220nH t = 1s half sine
C= 0.4F
1000 800 600 C= 0.2F 400 200 25 50 75 100 125 150 TJ, Temperature (C)
100
IC (A)
C= 0.3F
10sec
100sec
10
1msec
1 1 10 VCE (V) 100 1000
Fig 11. EPULSE vs. Temperature
Fig 12. Forrward Bias Safe Operating Area
4
www.irf.com
IRGP4065DPBF
100000
VGE, Gate-to-Emitter Voltage (V)
VGS = 0V, f = 1 MHZ C ies = C ge + C gd , C ce SHORTED Cres = C gc Coes = Cce + Cgc
25 IC = 25A 20 VCE = 240V VCE = 200V VCE = 150V
10000
Capacitance (pF)
Cies 1000
15
10
100
Coes Cres
5
10 0 50 100 150 200 250 300 VCE, Collector-toEmitter-Voltage(V)
0 0 10 20 30 40 50 60 70 80 Q G, Total Gate Charge (nC)
Fig 13. Typical Capacitance vs. Collector-to-Emitter Voltage
1 D = 0.50
Thermal Response ( Z thJC )
Fig 14. Typical Gate Charge vs. Gate-to-Emitter Voltage
0.20 0.1 0.10 0.05 0.02 0.01
J J 1 1 R1 R1 2 R2 R2 R3 R3 3 C 3
Ri (C/W) i (sec) 0.146 0.000131 0.382 0.271 0.001707 0.014532
0.01
2
Ci= i/Ri Ci i/Ri
SINGLE PULSE ( THERMAL RESPONSE )
Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc 0.001 0.01 0.1 1
0.001 1E-006
1E-005
0.0001
t1 , Rectangular Pulse Duration (sec)
Fig 15. Maximum Effective Transient Thermal Impedance, Junction-to-Case (IGBT)
10
(C/W)
1
Thermal Impedance Z
D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 Single Pulse (Thermal Resistance) Notes: 1. Duty factor D = t1/ t2
thJC
PDM
t1 t2
0.1
. .
0.01 0.00001
2. Peak Tj = Pdm x ZthJC + Tc
0.0001 0.001 0.01 0.1 t1, Rectangular Pulse Duration (Seconds)
1
10
Fig 16. Maximum Effective Transient Thermal Impedance, Junction-to-Case (DIODE)
www.irf.com
5
IRGP4065DPBF
IF, Instantaneous Forward Current (A)
100
100
10 Tj = 125C Tj = 25C
trr ( ns )
If = 8A, Tj = 125C
If = 8A, Tj = 25C
1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 VFM, Forward Voltage Drop (V)
10 100
di F /dt (A/s )
1000
Fig. 17 - Typical Forward Voltage Drop Characteristics
1000
Fig. 18 - Typical Reverse Recovery vs. di F /dt
Qrr ( nC )
If = 8A, Tj = 125C
100
If = 8A, Tj = 25C
Fig.20 - Switching Loss Circuit
A
RG
DRIVER L
C
10 100
1000
di F /dt (A/s ) Fig. 19- Typical Stored Charge vs. di F /dt
VCE Energy IC Current
B
VCC
RG
Ipulse DUT
Fig 21a. tst and EPULSE Test Circuit
Fig 21b. tst Test Waveforms
PULSE A
L
PULSE B
0
DUT 1K
VCC
tST
Fig 21c. EPULSE Test Waveforms
Fig. 22 - Gate Charge Circuit (turn-off)
6
www.irf.com
IRGP4065DPBF
TO-247AC Package Outline
Dimensions are shown in millimeters (inches)
TO-247AC Part Marking Information
EXAMPLE: T HIS IS AN IRFPE30 WIT H ASS EMBLY LOT CODE 5657 AS SEMBLED ON WW 35, 2001 IN T HE ASS EMBLY LINE "H" Note: "P" in as sembly line pos ition indicates "Lead-Free" INT ERNATIONAL RECTIFIER LOGO AS S EMBLY LOT CODE PART NUMBER
IRFPE30
56 135H 57
DATE CODE YEAR 1 = 2001 WEEK 35 LINE H
TO-247AC package is not recommended for Surface Mount Application. The specifications set forth in this data sheet are the sole and exclusive specifications applicable to the identified product, and no specifications or features are implied whether by industry custom, sampling or otherwise. We qualify our products in accordance with our internal practices and procedures, which by their nature do not include qualification to all possible or even all widely used applications. Without Data and specifications subject to change without notice. limitation, we have not qualified our product for medical use or applications involving hi-reliability applications. Customers are This product has been designed for the Industrial market. Qualification Standards can be found on IR's Web site. encouraged to and responsible for qualifying product to their own use and their own application environments, especially where particular features are critical to operational performance or safety. Please contact your IR representative if you have specific design or use requirements or for further information. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.06/06
www.irf.com
7

▲Up To Search▲

Price & Availability of IRGP4065DPBF

	To Download IRGP4065DPBF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .