View LC503TBG1-30P-A_1263497.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Cree(R) 5-mm Round LED
Model # LC503TBG-30P-A Data Sheet
30-degree, 5-mm round LED lamp in bluish-green color with water-transparent lens and stopper
Applications
* * * Advertising Signs Indicators Traffic Lights
Absolute Maximum Ratings (TA = 25C)
Items Forward Current Peak Forward Current Reverse Voltage Power Dissipation Operation Temperature Storage Temperature Lead Soldering Temperature
Note
Symbol IF IFP VR PD Topr Tstg Tsol
Absolute Maximum Rating 25 100 5 100 -40 ~ +95 -40 ~ +100
Unit mA mA V mW C C
Max. 260C for 3 sec. max. (3 mm from the base of the epoxy bulb)
Note: Pulse width 0.1 msec, duty 1/10.
Typical Electrical & Optical Characteristics (TA = 25C)
Characteristics Forward Voltage Forward Voltage Reverse Current Dominant Wavelength Luminous Intensity 50% Power Angle Symbol VF VF IR D IV 21/2H-H Condition IF = 20 mA IF = 20 A VR = 5 V IF = 20 mA IF = 20 mA IF = 20 mA Unit V V A nm mcd deg 500 4180 505 9000 27 1.7 Minimum Typical 3.4 Maximum 4.0 2.5 100 512
D-CT060.000 Data Sheet: CL
Subject to change without notice. www.cree.com/ledlamps
Standard Bins for LC503TBG-30P-A (IF = 20 mA)
Lamps are sorted to luminous intensity (IV) and dominant wavelength (D) bins shown. Orders for LC503TBG1-30P-A may be filled with any or all bins contained as below. All luminous intensity (IV) and dominant wavelength (D) values shown and specified are at IF = 20 mA.
Xe
Xf
Xg Z2 or above Z1
Luminous Intensity (IV)
16800 mcd
12000 mcd Y 8200 mcd Y 5860 mcd X 4180 mcd 500 nm 504 nm 508 nm 512 nm Dominant Wavelength (D)
Important Notes: 1. All ranks will be included per delivery; rank ratio will be based on the dice distribution. 2. Pb content <1000 ppm. 3. Tolerance of measurement of luminous intensity is 15%. 4. Tolerance of measurement of dominant wavelength is 1 nm. 5. Tolerance of measurement of VF is 0.05 V. 6. Packaging methods are available for selection; please refer to the "Cree LED Lamp Packaging Standard" document. 7. Please refer to the "Cree LED Lamp Reliability Test Standards" document for reliability test conditions. 8. Please refer to the "Cree LED Lamp Soldering & Handling" document for information about how to use this LED product safely.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
2
CLD-CT060.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Document No. Rev. No.
SPE/LC503TBG1-30P-A 04
Grap Graphs hs
If (mA)
-50 Vr(V) -40 -30 -20 -10 0 0.0 -10.0 -20.0 -30.0 -40.0 Ir(uA) FIG.2 REVERSE CURRENT VS. REVERSE VOLTAGE. -50.0
100.0 80.0 60.0 40.0 20.0
0.0 3.0 3.4 3.8 4.2 4.6 5.0 FIG.1 FORWARD CURRENT VS. FORWARD VOLTAGE.
Vf(V)
Half Power
WL=38nm
Domi WL= 505nm
5.0 4.0 3.0 2.0 1.0 0.0 0.0 If(mA) 20.0 40.0 60.0 80.0 100.0
I (RELATIVE LUMINOUS INTENSITY) 100% 75% 50% 25% 0% 300 WL(nm) 800
400
500
600
700
FIG.3 RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT.
FIG.4 RELATIVE LUMINOUS INTENSITY VS. WAVELENGTH.
50 40 30 20 10 0
IF(mA)
50% Power Angle : 27
0
Ie(%)
100%
80%
60%
40%
Ta( C) 0.0 20.0 40.0 60.0 80.0 100.0
-90 -60 -30 0 30 60 90
20% 0%
FIG.5 MAXIMUM FORWARD DC CURRENT VS AMBIENT TEMPERATURE (Tjmax=105 C)
FIG.6 FAR FIELD PATTERN
tems ared by oved by
3
Signatures
LiuZM
Date
2007-01-31 Rev. No 02 Date
Revision History
Change Description 2006-03-31 Cancel VF bin.
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Cree Aldosin 2007-01-31 ked by logo are registered trademarks of Cree, Inc.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
David
CLD-CT060.000
2007-01-31
03
2006-11-01 Change IV from X,Y,Z(typ)7000 to X,Y,Z,Z1(typ)9000mcd.
Mechanical Dimensions
All dimensions are in mm. Tolerance is 0.25 mm unless otherwise noted. An epoxy meniscus may extend ension mmaw ing leads. Dim about 1.5 Dr down the Burr around bottom of epoxy may be 0.5 mm max.
Document No. Rev. No.
SPE/LC503TBG1-30P-A 04
maximum ating 25 00 5 00 ~ +95 ~ +100
Unit mA mA V mW
C C
0C for 3 sec Max.
he base of the epoxy bulb) Notes
RoHS Compliance The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or otherwise restricted materials product are below the (also referred to as Ta = 25 limits) permitted for in thissubstances, or are usedmaximum concentration values accordance with EU the ) threshold such in an exempted application, in Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS), as amended through April 21, 2006.
cs (
C
Condition
Vision Advisory Claim
Min. ---
Typ. 3.4 ---
Max. 4.0 2.5
Unit V V
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
IF = 20mA
Cree 1.7 IF = 1.0 logo are registered trademarks of Cree, Inc. A
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
CLD-CT060.000
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage, and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the "Cree LED Lamp Packaging Standard" document for more information about shipping and packaging options. Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following manner:
Standard/Custom
0: Standard C: Custom
VF
0: Full forward voltage distribution 1~9, A~Z . . . : special request *
Wd/Color aaaaaaaaa-aaa-aa- x x x x x IV
1: Full-color distribution 2~9, A~Z . . . : special request * 0: Full luminous intensity distribution 1~9, A~Z . . . :special request *
Packing type Product P/N
0: Standard = Bulk pack 1~9, A~Z . . . : special request *
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number LC503TBG1-30P-A-00001 LC503TBG1-30P-A-00012 Description 5-mm Round 30 Bluish-Green 505 nm, FULL RANK, Bulk Pack 5-mm Round 30 Bluish-Green 505 nm, Y or above, Xe, Xf, Bulk Pack
* Please contact your Cree representative about the availability of non-standard kits.
Copyright (c) 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the Cree logo are registered trademarks of Cree, Inc.
5
CLD-CT060.000
Cree, Inc. 4600 Silicon Drive Durham, NC 27703 USA Tel: +1.919.313.5300 Fax: +1.919.313.5778 www.cree.com/ledlamps

▲Up To Search▲

Price & Availability of LC503TBG1-30P-A

	To Download LC503TBG1-30P-A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .