|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
LD-701 Series LED displays Large flat displays LD-701 Series The LD-701 series were designed in response to the need for large, flat displays. These are three-chip, flat displays with high luminance. !External dimensions (Units : mm) 21.0 19.80.1 4.50.1 5.7 2 Pin No.1 23 45 0.6 Pin No.1 2 (7.0) 34 56 (2.5) (7.0) 5.00.5 !Features 1) Three independent chip elements. 2) Large 4.5 x 19.8 mm emission area. 3) Thin outer casing, multiple units can be coupled together. 4) Four colors are available: red, orange, yellow and green. 5.60.1 0.3 6 Tolerances are 0.3 unless otherwise noted: !Selection guide Emitting color Type Order-based production. Red LD-701VR Orange LD-701DU Yellow LD-701YY Green LD-701MG !Absolute maximum ratings (Ta = 25C) Parameter Power dissipation Forward current Peak forward current Reverse voltage Operating temperature Storage temperature Symbol PD IF IFP VR Topr Tstg Red LD-701VR Orange LD-701DU Yellow LD-701YY 180 20 60 3 180 20 60 3 -25~+75 -30~+85 180 20 60 3 Green LD-701MG 225 25 60 3 Unit mW mA mA V C C Pulse width 1ms duty 1 / 5 (1.525) R4 LD-701 Series LED displays ! Electrical and optical characteristics (Ta = 25C) Parameter Forward voltage Reverse current Peak wavelength Spectral line half width Symbol Conditions VF IR P IF = 10mA VR = 3V IF = 10mA IF = 10mA Red - - - - - - - - Orange - - - - Yellow - - - - Green Unit V A nm nm Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. 2.0 - 650 40 3.0 10 - - 2.0 - 610 40 3.0 10 - - 2.1 - 585 40 3.0 10 - - 2.1 - 563 40 3.0 10 - - Electrical and optical values are guaranteed values per element. !Luminous intensity vs. wavelength 1.0 Green Yellow Orange Red Axial Luminous Intensity 0.8 0.6 0.4 0.2 0 500 550 600 650 700 750 Wavelength : P (nm) ! Luminous intensity Color Red Orange Yellow Green Type LD-701VR LD-701DU LD-701YY LD-701MG Min. 3.6 3.6 2.2 3.6 Typ. 10 10 6.3 10 Max. - - - - Unit mcd mcd mcd mcd Note 1: Measured at IF = 10mA Note 2: Current passes through all elements. ! Operation notes When forming leads, the bend should be at least 2mm from the base of the package. Solder after forming the leads, and ensure that the inside of the LED is not subjected to mechanical stress while it is hot. |
Price & Availability of LD-701 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |