View LX1702CLQ_1268640.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LX1702
TM (R)
1W Filter less Stereo Class-D Amplifier
PRODUCTION DATA SHEET
DESCRIPTION
KEY FEATURES No Output Filter Required Low EMI Design Low Quiescent Current: 4mA Low Shutdown Current: 1A Wide Supply Voltage Range: 2.5-5.5 Volt 1W Output Power into 8 Load with THD<1% @ 5.0V THD+N as low as 0.1% Small Form Factor...16-pin MLP Package only 4x4mm Built-in Clock Frequency Built-in Feedback Loop, Keep High Audio Fidelity Fixed 20dB Gain Full 20-20KHz Audio Bandwidth Shutdown Function Internal Thermal Shutdown High Efficiency: over 85% through Modulation Scheme and Class-D Operation Built-in De-Pop Circuit
APPLICATIONS
PVDD
The LX1702 family represents a new generation of a fully integrated audio stereo class-D amplifier from Microsemi. This CMOS stereo class-D amplifier series is optimized for low voltage, low power operation and minimum system cost. The products are ideal for use in battery powered applications where low power consumption is desirable such as portable speakers, DVDs, PMP, and other low power systems.
The LX1702 family provides very low quiescent current consumption through the use of a proprietary output modulation scheme. This technology enables filterless operation in many applications. The LX1702 features on board, low Rdson, complementary output MOSFET's that reduces the need for external components. The LX1702 is offered in a small footprint, low profile, 4mm x 4mm 16pin MLPQ.
WWW .Microsemi .C OM
IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com
PRODUCT HIGHLIGHT
Speaker Out 1 PVDD
PVSS1
VDD IN1+ IN1-
OUT1+
PVDD1
OUT1-
PVSS3
OUT2-
VDD IN1+ IN1IN2+ VSS IN2-
PVDD2
Part LX1702
OUT2+ PVSS2 EN
Speaker Out 2
Portable Speakers Portable DVD PMP / PMC Notebook PC
IN2IN2+ ENABLE
PACKAGE ORDER INFO
TA (C) 0 to 70
LQ
Plastic MLPQ 4mm x 4mm 16-Pin
RoHS Compliant / Pb-free
LX1702 LX1702
LX1702CLQ
Note: Available in Tape & Reel. Append the letters "TR" to the part number. (i.e. LX1702CLQ-TR)
Copyright (c) 2005 Rev. 1.0, 2006-10-11
Microsemi
Integrated Products Division 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 1
LX1702
TM (R)
1W Filter less Stereo Class-D Amplifier
PRODUCTION DATA SHEET
ABSOLUTE MAXIMUM RATINGS Positive Supply Voltage (VDD, PVDD) ........................................................... -0.3 to 6.5V Analog Input Voltage (IN1+, IN1-, IN2+, IN2-).................................. -0.3 to VDD + 0.3V Digital Input Voltage (EN, MUTE) ..................................................... -0.3 to VDD + 0.3V Operating Temperature Range (TA) ................................................................0C to +70C Maximum Operating Junction Temperature (TJ) ....................................................... 150C Storage Temperature Range.........................................................................-65C to 150C Package Peak Temp. for Solder Reflow (40 seconds maximum exposure) ... 260C (+0 -5)
Note: Exceeding these ratings could cause damage to the device. All voltages are with respect to Ground. Currents are positive into, negative out of specified terminal.
PACKAGE PIN OUT
WWW .Microsemi .C OM
PVDD1
OUT1+
16
15
14
PVSS1 VDD IN1+ IN1-
PVSS3
13 12 11
OUT1-
1 2 3 4 5 6 7 8
OUT2PVDD2 OUT2+ PVSS2
e 10
9
THERMAL DATA
LQ PACKAGE
(Top View)
LQ
Plastic MLPQ 16-Pin 4mm x 4mm 24.6C/W
RoHS / Pb-free 100% Matte Tin Lead Finish
THERMAL RESISTANCE-JUNCTION TO AMBIENT, JA
Junction Temperature Calculation: TJ = TA + (PD x JA). The JA numbers are guidelines for the thermal performance of the device/pc-board system. All of the above assume no ambient airflow.
FUNCTIONAL PIN DESCRIPTION Name VSS IN1IN1+ EN IN2IN2+ VDD PVSS1 PVSS2 PVSS3 OUT1+ PVDD1 & PVDD2 OUT1OUT2+ OUT2Negative supply to analog stage (ground) Negative audio input channel 1 Positive audio input channel 1 Enable pin, active high Negative audio input channel 2 Positive audio input channel 2 Analog positive power supply Negative supply to Negative output stage (ground) for channel1 Description
IN2+
VSS
IN2-
EN
PACKAGE DATA PACKAGE DATA
Positive audio (PWM) output for channel 1 Positive supply to Positive output stage for channel 1 Negative audio (PWM) output for channel 1 Positive audio (PWM) output channel 2 Negative audio (PWM) output channel 2
Copyright (c) 2005 Rev. 1.0, 2006-10-11
Microsemi
Integrated Products Division 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 2
LX1702
TM (R)
1W Filter less Stereo Class-D Amplifier
PRODUCTION DATA SHEET
SYSTEM CHARACTERISTICS The following specifications apply over the operating ambient temperature 0 < TA < 70C except where otherwise noted and the following test conditions: PVDD = VDD = 5.0V, PVSS = VSS = 0V, RL = 8 Parameter
Supply Current: Quiescent Supply Current: Shutdown Mode Output Power @ 8 Ohms Power Efficiency Total Harmonic Distortion @ 50% of Maxim Power Signal To Noise Ratio Output Noise Floor Frequency Response Lower Corner Frequency Frequency Response Power Supply Rejection Ratio Common Mode Rejection Ratio Gain PSRR CMRR GSYS
WWW .Microsemi .C OM
Symbol
IQQ IQQSD PQ THD_N SNR VN FLO
Test Conditions
No Load Disable Pin Active VDD = PVDD = 5V, Fin THD+N = 1% = 1kHz THD+N = 10% THD+N = 1% VDD = PVDD = 3.3V, Fin = 1kHz THD+N = 10% VDD = PVDD = 5V, Fin = 1kHz VDD = PVDD = 5V, Fin = 1kHz, RL = 8 VDD = PVDD = 5V, F = 1kHz, PO = 0.5W, A-weighted Input Grounded A-weighted 20 to 20kHz 3dB relative to 1kHz VDD = PVDD = 2.5 to 5.5V, RL = 8, PO = 200mW @ 20 ~ 80kHz, Filter less Input Reffered, VDD = PVDD = 2.5V to 5.5V VDD = PVDD = 2.5V to 5.5V
Min
LX1702 Typ
2.5 1.2 1.6 0.45 0.6 85 0.1 90 100
Max
5 1
Units
mA A W % % dB VRMS
20
20K 3
Hz dB dB dB dB
55 55
60 60 20
ELECTRICALS ELECTRICALS
Copyright (c) 2005 Rev. 1.0, 2006-10-11
Microsemi
Integrated Products Division 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 3
LX1702
TM (R)
1W Filter less Stereo Class-D Amplifier
PRODUCTION DATA SHEET
ELECTRICAL CHARACTERISTICS The following specifications apply over the operating ambient temperature 0 < TA < 70C except where otherwise noted and the following test conditions: PVDD = VDD = 5.0V, PVSS = VSS = 0V, RL = 8 Parameter
Supply Voltage Oscillator Frequency Supply Current: Quiescent Supply Current: Shutdown Mode Power Supply Rejection Ratio Input Resistance Output DC Offset
WWW .Microsemi .C OM
Symbol
Test Conditions
Min
2.5
LX1702 Typ
200 2.5 2 0.5 60 18 400 400 550 550
Max
5.5 5 4 2 +50
Units
V kHz mA A dB K mV
Static Drain-to-Source ONResistance
Stage Gain Thermal Junction Shutdown Thermal Shutdown Hysteresis Enable Threshold Under Voltage Threshold Level
VDD PVDD fSW VDD = PVDD = 2.5 ~ 5.5V VDD = PVDD = 5V No Load IQQ VDD = PVDD = 3.3V IQQSD Disable Pin Active PSRR VDD = PVDD = 2.5V to 5.5V RIN VDD = PVDD = 2.5V ~ 5.5V Single Ended VOFF Input Shorted to GND P Channel VDD = PVDD = 5V N Channel P Channel VDD = PVDD = 3.3V RDSON N Channel P Channel VDD = PVDD = 2.5V N Channel GH VDD = PVDD = 2.5V to 5.5V TJ EN VDD
55 -50
m 900 900 11 2.4 2.2
9 2.1 1.8
10 150 25 2.25 2.0
V/V C C V V
SIMPLIFIED BLOCK DIAGRAM
Triangle Wave Generator
LX1702
PVDD2 PVDD1
DRIVER
VINP VINN
Dynamic Pulse Generation
DRIVER
OUTP OUTN
PVSS1
ELECTRICALS ELECTRICALS
VDD VSS
De-pop signal ground Generation
LP
PVSS2
LP
EN
Figure 1 - LX1702 Simplified Block Diagram (Half Circuit)
Copyright (c) 2005 Rev. 1.0, 2006-10-11
Microsemi
Integrated Products Division 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 4
LX1702
TM (R)
1W Filter less Stereo Class-D Amplifier
PRODUCTION DATA SHEET
SYSTEM TEST SETUP
WWW .Microsemi .C OM
Power Supply -
+
VBAT
GND
C1
2nd Order RC LPF
TP1OUT1-
Input1Audio Precision System One GND Input1+ Input2-
Output1Audio Precision System One Output1+ Output2-
IN1-
OUT1+ IN1+ IN2LX1702 2nd Order RC LPF 2nd Order RC LPF TP1+ TP2OUT2IN2+ OUT2+ 2nd Order RC LPF TP2+
Output2+
Input2+
LX1702 Evaluation Kit
Figure 2 - Typical Evaluation Test Setup Circuit Default Settings: Equipments: Audio Precision SYSTEM 1 Oscilloscope, Power Supply ~ +5V; Supply Voltage: 2.5V / 3.3V / 5.0V 3 corner voltages On-Board passive LPF: 40kHz cut off frequency (-6dB) AP settings: 10Hz ~ 22KHz BPF
APPLICATIONS APPLICATIONS
Copyright (c) 2005 Rev. 1.0, 2006-10-11
Microsemi
Integrated Products Division 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 5
LX1702
TM (R)
1W Filter less Stereo Class-D Amplifier
PRODUCTION DATA SHEET
APPLICATION CIRCUITS
WWW .Microsemi .C OM
R1 470
R2 470
TP9
C12 4700pF
C11 2200pF For Test Purposes Only
TB2 OUTR+ OUTR-
R3 470 TP1 TB1 +VIN RTN C1 47F VIN C7 1F TP6 TP5 C19 4700pF
R4 470
TP10
C10 2200pF For Test Purposes Only
TP2
OUT1-
OUT1+
C2 1F J1 C3 0.47F JP1 INR+ INRJ2 C5 0.47F JP2 INL+ INLC4 0.47F
PVDD1
PVSS3
TP7 R5 470 VIN C14 4700pF TP8 R6 470
PVSS1 VDD IN1+ IN1-
OUT2-
TP11
LX1702 Part
IN2+
PVDD2 OUT2+ PVSS2
C8 1F
C13 2200pF For Test Purposes Only
VSS
IN2-
EN
TB3 TP1 C6 0.47F VIN ENABLE TP4 OUTLOUTL+
APPLICATIONS APPLICATIONS
R7 470
R8 470
TP12
C15 4700pF
C16 2200pF For Test Purposes Only
Figure 3 - Typical LX1702 Application
Copyright (c) 2005 Rev. 1.0, 2006-10-11
Microsemi
Integrated Products Division 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 6
LX1702
TM (R)
1W Filter less Stereo Class-D Amplifier
PRODUCTION DATA SHEET
FUNCTIONAL DESCRIPTION
WWW .Microsemi .C OM
GENERAL DESCRIPTION The LX1702 is a filterless, low-EMI, class-D audio power amplifier. It offers high performance (THD+N is just 0.1% @ 1W), high efficiency (>85% @ 0.6W), and best in class EMI radiation (just 20dBV/m). The internal signal path is completely differential to minimize commonmode noise pickup. The inputs may be driven single-ended or differentially and they may be direct or AC coupled. The LX1702 may be operated with just a single decoupling capacitor. FILTERLESS 3-LEVEL CLASS-D MODULATION The LX1702 output stage is configured as a full H-bridge push-pull driver. The speaker must be driven differentially from the OUTP and OUTN pins. Each side of the speaker is driven by a 200KHz switching signal that transitions between VDD and GND. With zero input voltage, the duty cycle at each output is around 50% and the signals are inphase with each other. In this case, there is basically no differential voltage across the speaker. When the input signal goes positive, the duty cycle at OUTP increases above 50% and the duty cycle at OUTN decreases below 50%. This causes a net positive current to flow into the speaker. A negative input voltage causes the OUTN duty cycle to increase and the OUTP duty cycle to decrease which causes a net negative current to flow into the speaker. The differential voltage across the speaker has a fundamental frequency of twice the 200KHz switching frequency. The speaker itself serves as the low pass filter which then recreates the audio signal. This type of modulation can be described as driving +VDD, -VDD, and 0V across the speaker which is why it is referred to as 3-Level modulation. Classical, 2-Level modulation drives either +VDD or -VDD across the speaker at all times. This scheme requires an L-C filter between the amplifier's outputs and the speaker in order to keep the output current low.
LOW-EMI OUTPUT STAGE WITH SLEW RATE LIMITING AND ACTIVE OVERSHOOT CLAMPING With 3-Level modulation, the carrier frequency drives a full amplitude common-mode signal to the speaker wires. This can cause high EMI radiation. One way to combat this would be to filter the outputs with LC filters or ferrite beads located close to the amplifier. In the LX1702, the output stage has been carefully designed to minimize EMI radiation so that these types of filters are not required. Slew rate limiting is used to keep the outputs from switching too quickly. Active overshoot clamping is used to minimize the inductive overshoot which occurs at each transition. These two techniques allow the LX1702 to easily meet FCC standards for radiated emissions when driving up to 3 meters of speaker wire. DIFFERENTIAL SIGNAL PATH, WIDE DYNAMIC RANGE,
AND BUILT-IN THERMAL OVERLOAD PROTECTION
The fully differential signal path uses Pulse Width Modulation and multiple feedback loops to provide high performance and low distortion. This is all fully-integrated to eliminate the need for any external feedback components or filters. The gain is fixed by internal resistors at 20dB. The differential signal path and internal voltage boosters allow for wide dynamic range. In fact, the LX1702 can be operated from supplies as low as 2.5V and as high as 5.5V. The output power will be limited by the available supply voltage. An internal thermal sensing circuit shuts down the outputs when the junction temperature exceeds about 150C to provide thermal overload protection.
APPLICATIONS APPLICATIONS
Copyright (c) 2005 Rev. 1.0, 2006-10-11
Microsemi
Integrated Products Division 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 7
LX1702
TM (R)
1W Filter less Stereo Class-D Amplifier
PRODUCTION DATA SHEET
THD+N VS. POWER
100 50 20 10 5 2 1 0.5 0.2 0.1 0.05 0.02 0.01 0.005 0.002 0.001
THD+N VS. FREQUENCY
100 50 20 10 5 2 1 0.5 0.2 0.1 0.05
PVDD=VDD=5.0V, RL = 8OHM Fin=1KHz, 10~22KHz BPF
WWW .Microsemi .C OM
PVDD=VDD=5V, RL=8OHM POUT=1W, 10 ~ 22KHz BPF
%
%
0.02 0.01 0.005 0.002 0.001 20
60m 100m
200m
500m W
1
2
5
50
100
200
500 Hz
1k
2k
5k
10k 20k
THD VS. POWER VS. VIN
100 50 20 10 5 2 1 0.5 % 0.2 0.1 0.05 0.02 0.01 0.005 0.002 0.001 60m 100m 200m 500m W 1 2 5
SIGNAL TO NOISE
+0 -5 -10 -15 -20 -25 -30 -35 -40 -45 dBr -50 -55 -60 -65 -70 -75 -80 -85 -90 -95 -100 20 50 100 Hz 200 500 1k
VIN = 2.5V, 3.5V, 4.5V, 5.5V, RL = 8OHM
PVDD=VDD=5.0V RL=8OHM NO Input, 1 ~22KHz BPF Non A-weighted
CHANNEL CROSSTALK
+0 -5 -10 -15 -20 -25 -30 -35 -40 -45 dB -50 -55 -60 -65 -70 -75 -80 -85 -90 -95 -100 20 50 100 200 500 Hz 1k 2k 5k 10k 20k
CMRR
+0 -5 -10 -15 -20 -25 -30 -35 -40 -45 dBr -50 -55 -60 -65 -70 -75 -80 -85 -90 -95 -100 20
PVDD=VDD=5.0V, RL = 8OHM POUT = 1W, 10 ~ 22KHz BPF
GRAPHS GRAPHS
50
100
200
500 Hz
1k
2k
5k
10k
20k
Copyright (c) 2005 Rev. 1.0, 2006-10-11
Microsemi
Integrated Products Division 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 8
LX1702
TM (R)
1W Filter less Stereo Class-D Amplifier
PRODUCTION DATA SHEET
FREQUENCY RESPONSE
+6 +5.5 +5 +4.5 +4 +3.5 +3 +2.5 +2 +1.5 +1 +0.5 -0 dBr -0.5 -1 -1.5 -2 -2.5 -3 -3.5 -4 -4.5 -5 -5.5 -6
PSRR
+0 -5 -10 -15 -20 -25 -30 -35 -40 dBr -45 -50 -55 -60 -65 -70 -75 -80 -85 -90 -95 -100 20 50 100 200 500 Hz 1k 2k 5k 10k 20k
WWW .Microsemi .C OM
PVDD=VDD=5.0V, RL = 8OHM Input Shorted, ?V = 1VP-P
20
50
100
200
500
1k Hz
2k
5k
10k
20k
50k 80k
GAIN RESPONSE
+30 +29 PVDD=VDD=5.0V, RL = 8OHM +28 +27 Pout=1W, 10 ~ 80KHz BPF +26 +25 +24 +23 +22 +21 +20 +19 +18 +17 +16 dBr +15 +14 +13 +12 +11 +10 +9 +8 +7 +6 +5 +4 +3 +2 +1 +0 20 50 100 200 500 1k 2k Hz
5k 10k 20k
50k 80k
GRAPHS GRAPHS
Copyright (c) 2005 Rev. 1.0, 2006-10-11
Microsemi
Integrated Products Division 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 9
LX1702
TM (R)
1W Filter less Stereo Class-D Amplifier
PRODUCTION DATA SHEET
PACKAGE DIMENSIONS
WWW .Microsemi .C OM
LQ
16-Pin MLPQ Plastic (4x4mm EP / 114x114Cu Exposed Pad)
D
b
E2 L
E
D2
e A1 A3 A
K
Dim A A1 A3 b D E e D2 E2 K L
Note:
MILLIMETERS MIN MAX 0.80 1.00 0 0.05 0.18 0.30 0.23 0.38 4.00 BSC 4.00 BSC 0.65 BSC 2.55 2.80 2.55 2.80 0.20 0.30 0.50
INCHES MIN MAX 0.031 0.039 0 0.002 0.007 0.012 0.009 0.015 0.157 BSC 0.157 BSC 0.026 BSC 0.100 0.110 0.100 0.110 0.008 0.012 0.020
1. Dimensions do not include mold flash or protrusions; these shall not exceed 0.155mm(.006") on any side. Lead dimension shall not include solder coverage.
MECHANICALS MECHANICALS
Copyright (c) 2005 Rev. 1.0, 2006-10-11
Microsemi
Integrated Products Division 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 10
LX1702
TM (R)
1W Filter less Stereo Class-D Amplifier
PRODUCTION DATA SHEET
NOTES
WWW .Microsemi .C OM
NOTES NOTES
PRODUCTION DATA - Information contained in this document is proprietary to Microsemi and is current as of publication date. This document may not be modified in any way without the express written consent of Microsemi. Product processing does not necessarily include testing of all parameters. Microsemi reserves the right to change the configuration and performance of the product and to discontinue product at any time.
Copyright (c) 2005 Rev. 1.0, 2006-10-11
Microsemi
Integrated Products Division 11861 Western Avenue, Garden Grove, CA. 92841, 714-898-8121, Fax: 714-893-2570
Page 11

▲Up To Search▲

Price & Availability of LX1702CLQ

	To Download LX1702CLQ Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .