|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
High Linearity MMIC Mixer with Integrated Local Oscillator Amplifier, 1700 - 2000 MHz Features * * * * * * Up or Down Frequency Conversion High Input IP3: 21 dBm Low LO Drive: -5 dBm to +5 dBm Very Low Current: 7 mA Single Ended Ports, 50-Ohm Impedance Small Plastic Package: SOT-26 MD57-0002 V1 Functional Schematic RF IF Description The MD57-0002 is a passive MMIC mixer with an on-chip LO buffer amplifier that allows the MD57-0002 to operate with LO drive levels of -5 dBm to +5 dBm. The MD57-0002 features single ended ports and does not require the use of external baluns. All ports are 50-ohm impedance. The MD57-0002 is ideally suited for up and down frequency convertor applications in DCS1800, PCS1900, PHS and 3G wireless communications equipment requiring low LO power, high linearity, low conversion loss and very low current consumption. The MD57-0002 is fabricated using a 0.5 micron gate length GaAs MESFET process. This process features full passivation for increased RF performance and enhanced reliability. SRC GND LO VDD Pin Configuration Pin # 1 2 3 4 5 6 Pin Name RF SRC LO VDD GND IF Description. RF Input/Output LO Amplifier Bias Resistor LO Input LO Amplifier Bias Voltage Ground IF Input/Output Ordering Information Part Number MD57-0002 MD57-0002TR MD57-0002SMB Absolute Maximum Ratings 1 Package Bulk Packaging 1000 piece reel Sample Test Board Parameter Input RF/IF Power Input LO Power Voltage Operating Temperature Storage Temperature Absolute Maximum +27 dBm +17 dBm +6 V -40C to +85C -65C to +150C Note: Reference Application Note M513 for reel size information. 1. Exceeding any one or combination of these limits may cause permanent damage to this device. 1 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. High Linearity MMIC Mixer with Integrated Local Oscillator Amplifier, 1700 - 2000 MHz Electrical Specifications: TA = 25C, Z0 = 50 Ohms, LO VDD = 5 V RF = 1900 MHz (-10 dBm), LO = 1660 MHz (0 dBm), IF = 240 MHz Parameter Conversion Loss Noise Figure Input IP3 Input P1dB Isolation MD57-0002 V1 Test Conditions -- -- Tone Spacing = 300 KHz -- RF to IF LO to IF LO to RF VDD = 5 V Units dB dB dBm dBm dB dB dB mA Min -- -- 18.5 -- -- -- -- -- Typ 8.5 8.5 21 15 18 5 13 7 Max 10.5 -- -- -- -- -- -- 10 Current Recommended PCB Configuration PCB Schematic L4 RF IF L1 C5 C4 R1 L3 LO VDD L2 0 Ohm VDD SRC GND C3 C2 C1 External Circuitry Parts List Part Value 200 27 nH 3.3 nH 7.5 nH 3.3 nH 100 pF 0.1 F 6 pF 5 pF 0.1 F Purpose LO Amplifier Bias Resistor IF matching Inductor 2 LO VDD Inductor LO Input Matching RF Port Matching IF DC Blocking Capacitor IF VDD Bypass Capacitor RF VDD Bypass Capacitor RF Source Bypass IF Source Bypass PCB Cross Section View R1 L1 L2 L3 L4 C1 C2 C3 PCB dielectric between RF traces and RF ground layers should be chosen to reduce RF discontinuities between 50ohm lines and package pins. M/A-COM recommends an FR4 dielectric thickness of .008 (0.2 mm) yielding a 50-ohm line width of 0.015" (0.38 mm). The recommended metalization is 1 oz. copper. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. C4 C5 2. L1 can be changed to 47 nH for lower IF frequencies (down to 150 MHz). * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. High Linearity MMIC Mixer with Integrated Local Oscillator Amplifier, 1700 - 2000 MHz MD57-0002 V1 Typical Performance Curves @ +25C (IF Frequency = 240 MHz, Low Side LO) Conversion Gain vs. Frequency LO = -5 dBm -5 LO = 0 dBm LO = 5 dBm Conversion Gain vs. LO Power, 1850 MHz RF -5 Conversion Gain (dB) Conversion Gain (dB) 1750 1800 1850 1900 1950 2000 -6 -7 -8 -9 -10 1700 -6 -7 -8 -9 -10 -5 -3 -1 1 3 5 RF Frequency (MHz) LO Power (dBm) Input IP3 vs. Frequency LO = -5 dBm 30 26 LO = 0 dBm LO = 5 dBm Input IP3 vs. LO Power, 1850 MHz RF 30 26 Input IP3 (dBm) 22 18 14 10 1700 Input IP3 (dBm) 1750 1800 1850 1900 1950 2000 22 18 14 10 -5 -3 -1 1 3 5 RF Frequency (MHz) LO Power (dBm) LO and RF Return Loss LO Port S11 0 RF Port S11 IF Return Loss (LO Power = 0 dBm) L1 = 27 nH 0 -5 L1 = 47 nH -10 IF S11 (dB) 1400 1500 1600 1700 1800 1900 2000 S11 (dB) -10 -15 -20 -25 100 -20 -30 -40 1300 150 200 250 300 350 400 Frequency (MHz) IF Frequency (MHz) 3 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. High Linearity MMIC Mixer with Integrated Local Oscillator Amplifier, 1700 - 2000 MHz Typical Performance Curves @ +25C Isolation vs. Frequency LO to IF Isolation RF to IF Isolation 30 25 LO to RF Isolation MD57-0002 V1 SOT-26 Isolation (dB) 20 15 10 5 0 -5 1200 1300 1400 1500 1600 1700 1800 1900 2000 Frequency (MHz) 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. |
Price & Availability of MD57-0002TR |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |