 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MI - AIM Features Inputs: 115 Vac; 60/400 Hz Output power: 250 W Compatible with MI-x7x family modules TM Military COTS Component Front-end Modules MIL-STD-704A input transient protection 95% efficiency Operating temperature to 100C Size: 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7 mm) MIL-STD-461D/E EMI compliance MIL-STD-810 environments Product Highlights The MI-AIM AC input module interfaces directly with AC mains to provide line rectification, EMI filtering, transient protection, and inrush limiting. These front-end modules accept 115 Vac and provide 250 W of output power for any of Vicor's MI-x7x family of standard and junior size modules. The MI-AIM meets CE102 conducted emissions requirements of MILSTD-461D/E and the transient and spike requirements of MIL-STD-704A. Produced in ISO 9001-registered facilities, the fully epoxy encapsulated 2.28" x 2.4" x 0.5" (57,9 x 61,0 x 12,7 mm) modules meet the environmental test requirements of MIL-STD-810. Specifications (At TBP = 25C, unless otherwise specified) PARAMETER MIN TYP MAX 140 440 180 480 40 CE102 per MIL-STD-461D/E 95 50 250 no damage 1200 none 1500 40,000 86 / 240 9 20 40 F UNITS Vrms Hz Vrms Vrms Hz A, peak % % W NOTES Input Characteristics (per MIL-STD-704A) Steady state input (V) 85 115 (f) 47 60/400 Transient input (V) 80 (f) Inrush current Conducted EMI Efficiency Spikes Power Short circuit protection Ext. capacitance (C1) Isolation Input to output Input to baseplate Environmental - MIL-STD-810 Altitude - method 500.2 Humidity - method 507.2 Acceleration - method 513.3 Vibration - method 514.3 Shock - method 516.3 0.2 seconds 5 seconds 5 seconds 125 Vac 100-125 Vac; 60 Hz 115 Vac; 60/400 Hz Nominal line voltage, 50 s 100C 100-125 Vac See connection diagram Provided by converter Output Characteristics Vrms feet % / hours g's g's g's 1,000 hours 1,000 hours 1,000 hours C/W Baseplate to sink, with thermal pad ounces (grams) Procedure 3 Procedure 1, cycle 1 Procedure 2 Procedure 1, category 6 Procedure 1 Reliability - MIL-HDBK-217F (MI-AIM-M1) 25C Ground Benign: G.B. 4,277 50C Naval Sheltered: N.S. 770 65C Airborne Inhabited Cargo: A.I.C. 603 Mechanical Characteristics Thermal resistance Weight 0.14 3 (85) MI-AIM 06/05 1 of 2 Product Grade Specifications PARAMETER I - Grade Part Number Storage temperature Operating temperature (baseplate) Power cycling burn-in Temperature cycled with power off 17C per minute rate of change Test data supplied at these temperatures* Warranty Environmental compliance MI-AIM-I1 -55C to +125C -40C to +100C 12 hours, 25 cycles 12 cycles -65C to +100C -40C, +80C 2 years MIL-STD-810 PRODUCT GRADE M- Grade MI-AIM-M1 -65C to +125C -55C to +100C 96 hours, 200 cycles 12 cycles -65C to +100C -55C, +80C 2 years MIL-STD-810 *Test data available for review or download from vicorpower.com Connection Diagram 0.01 F (Two 4700 pF ) Y-Rated Capacitors F1 L1 +Out Gate In Parallel N/C L2/N Gate Out -Out N/C F2 +In Gate In +Out 0.01 F Ceramic +S Trim -S -Out AC In 0.47 F C out* Gate Out -In MI-27x/J7x Driver Load 0.01 F Ceramic MI-AIM 0.01 F (Two 4700 pF ) Y-Rated Capacitors * 1200F Max. (See Vicor's Applications Manual, page 12-2, Selecting Capacitors for AIM Modules.) Fuse 1: 7A F03A type recommended. Fuse 2: For MI-x7x-xx - Buss PC-Tron 2.5A (450V) Mechanical Drawing 2.28 (57,9) 0.49 (12,4) 0.65 (16,5) 1.30 (33,0) 0.30.015 (7,6)(0,38) 0.080 Dia (2) places Solder plate over copper alloy 4 3 2.10 (53,4) 2 1 9 8 1.40 1.00 (35,6) 0.70 (25,4) 0.40 (17,8) (10,2) 0.35 0.015 (8,9)(0,38) MI-AIM 7 6 5 Pin # 1 2 3 4 5 6 7 8 9 Function L1 NC NC L2/N +Out Gate In Parallel Gate Out -Out 0.15 (3,8) FULL R 0.15 (3,8) 0.040 (1,0) Dia (7) places Solder plate over copper alloy Product ID this surface 2.40 (61,0) 0.30 (7,6) Min. 1.75 (44,4) Max. 1.90 (48,3) 0.22 (5,6) Min. 0.50 (12,7) 0.12 (3,0) +0.030 (0,76) -0.000 (0) .01 Aluminum Base MI-AIM 06/05 2 of 2 |
Price & Availability of MI-AIM-M1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |