View PE4134_1294973.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Product Specification
PE4134
Product Description
The PE4134 is a high linearity, passive Quad MOSFET Mixer for PCS & 3G Base Station Receivers, exhibiting high dynamic range performance over a broad LO drive range of up to +20 dBm. This mixer integrates passive matching networks to provide single-ended interfaces for the RF and LO ports, eliminating the need for external RF baluns or matching networks. The PE4134 is optimized for frequency down-conversion using low-side LO injection for PCS & 3G Base Station applications, and is also suitable for up-conversion applications. The PE4134 is manufactured on Peregrine's UltraCMOSTM process, a patented variation of silicon-on-insulator (SOI) technology on a sapphire substrate, offering the performance of GaAs with the economy and integration of conventional CMOS. Figure 1. Functional Diagram High Linearity Quad MOSFET Mixer for PCS & 3G BTS Features * Integrated, single-ended RF & LO interfaces
* High linearity: IIP3 >+31 dBm,
1.9 GHz (+17 dBm LO)
* Low-conversion loss: 7.4 dB
(+17 dBm LO)
* High isolation: Typical LO-IF at
33 dB, LO-RF at 31 dB
* Optimized for low-side LO injection * Packaged in a 6-lead 3x3 mm DFN
Figure 2. Package Type
6-lead 3x3 mm DFN
LO
180o Two-Way Power Divider
IF
RF
180o Two-Way Power Divider
Table 1. AC and DC Electrical Specifications @ +25 C
Parameter
Frequency Range: LO RF IF1 Conversion Loss2 Isolation: LO-RF LO-IF Input IP3 1.8 GHz 1.9 GHz 2.0 GHz Input 1 dB Compression Notes: 27 27 26 31 28
Minimum
1540 1800 --
Typical
--260 7.4 31 33 29 33 31 22
Maximum
1740 2000 -8.0
Units
MHz MHz MHz dB dB dB dBm dBm dBm dBm
1. An IF frequency of 260 MHz is a nominal frequency. The IF frequency can be specified by the user as long as the RF and LO frequencies are within the specified maximum and minimum. 2. Conversion Loss includes loss of IF transformer (M/A COM ETK4-2T, nominal loss 0.7 dB at 260 MHz).
*Test conditions unless otherwise noted: IF = 260 MHz, LO input drive = 17 dBm, RF input drive = 3 dBm. Document No. 70-0087-03 www.psemi.com
(c)2006 Peregrine Semiconductor Corp. All rights reserved. Page 1 of 9
PE4134
Product Specification
Figure 3. Pin Configuration (Top View)
Table 3. Absolute Maximum Ratings
Symbol
TST
Parameter/Conditions
Storage temperature range Operating temperature range LO input power RF input power ESD Sensitive Device
Min
-65 -40
Max
150 85 20 12 250
Units
C C dBm dBm V
IF1 GND LO
1 2 3
6 5 4
IF2
TOP
GND
PLO PRF
PE4134
RF
VESD
Table 2. Pin Descriptions
Pin No.
1
Pin Name
IF1
Description
IF differential output Ground connections for Mixer. Traces should be physically short and connect immediately to ground plane for best performance. The exposed solder pad must also be soldered to the ground plane for best performance. LO Input RF Input Ground connections for Mixer. Traces should be physically short and connect immediately to ground plane for best performance. The exposed solder pad must also be soldered to the ground plane for best performance. IF differential output
Absolute Maximum Ratings are those values listed in the above table. Exceeding these values may cause permanent device damage. Functional operation should be restricted to the limits in the DC Electrical Specifications table. Exposure to absolute maximum ratings for extended periods may affect device reliability. Electrostatic Discharge (ESD) Precautions When handling this UltraCMOSTM device, observe the same precautions that you would use with other ESD-sensitive devices. Although this device contains circuitry to protect it from damage due to ESD, precautions should be taken to avoid exceeding the rating specified. Latch-Up Avoidance Unlike conventional CMOS devices, UltraCMOSTM devices are immune to latch-up.
2
GND
3 4
LO RF
5
GND
6
IF2
(c)2006 Peregrine Semiconductor Corp. All rights reserved. Page 2 of 9
Document No. 70-0087-03 UltraCMOSTM RFIC Solutions
PE4134
Product Specification
Evaluation Kit
Figure 4. Evaluation Board Layout Table 4. Bill of Materials
Reference
T2
Value / Description
M/A Com ETK4-2T 0 PE4134 MLP Mixer SMA Connector
Pin1
R1 U1 J1, J2, J3
Applications Support
If you have a problem with your evaluation kit or if you have applications questions, please contact applications support: E-Mail: help@psemi.com (fastest response) Phone: (858) 731-9400
Figure 5. Evaluation Board Schematic Diagram
3
2 6-lead MLPM
3 x 3 mm
1
T2
LO RF
IF
4
5
6
T2, M/A-Com E-Series RF 4:1 Transformer, 2.0 - 1000 MHz, ETK4-2T
Figure 6. Evaluation Board Testing Block Diagram, 2-Tone Setup
4134 PA
3 dB
Sig Gen
LO
Eval Board
IF
3 dB
RF
3 dB
Spectrum Analyzer
Sig Gen
6 dB
Hybrid Tee
6 dB
Sig Gen
Document No. 70-0087-03 www.psemi.com
(c)2006 Peregrine Semiconductor Corp. All rights reserved. Page 3 of 9
PE4134
Product Specification
Typical Performance Data (LO=17 dBm, RF=3 dBm, IF=260 MHz) Figure 7. Conversion Loss Figure 8. Input 1dB Compression
0
25
-2
20 1dB Compression (dB) 85 C 15 25 C -40 C
Conversion Loss (dB)
-4
-6
10
-8
5
-40 C 1900 Frequency (MHz) 1950 2000
85 C -10 1800
25 C
1850
0 1800
1850
1900 Frequency (MHz)
1950
2000
Figure 9. Input IP3
Figure 10. Output IP3
40 35 30 25 IIP3 (dBm) 20 15 10 5 0 1800 85 C 25 C -40 C
30
25
20 OIP3 (dBm) 85 C 15 25 C -40 C
10
5
1850
1900 Frequency (MHz)
1950
2000
0 1800
1850
1900 Frequency (MHz)
1950
2000
(c)2006 Peregrine Semiconductor Corp. All rights reserved. Page 4 of 9
Document No. 70-0087-03 UltraCMOSTM RFIC Solutions
PE4134
Product Specification
Typical Performance Data (LO=17 dBm, RF=3 dBm, IF=260 MHz) Figure 11. LO-IF Isolation vs. Frequency Figure 12. LO-RF Isolation vs. Frequency
0
0
-10 LO-IF Isolation (dB)
LO-RF Isolation (dB)
-10
-20
-20
-30
-30
-40 -40 C -50 1800 25 C 85 C
-40 -40 C 25 C -50 1800 85 C
1850
1900 Frequency (MHz)
1950
2000
1850
1900 Frequency (MHz)
1950
2000
Figure 13. LO Port Return Loss @ 25C
Figure 14. RF Port Return Loss @ 25C
0 -5
0
-5
-10 Return Loss (dB) -15 -20 -25 -30 -35 -40 1500
-25 1700 Return Loss (dB) -10
-15
-20
1550
1600
1650
1700
1750
1800
1750
1800
1850
1900
1950
2000
2050
2100
Frequency (MHz)
Frequency (MHz)
Document No. 70-0087-03 www.psemi.com
(c)2006 Peregrine Semiconductor Corp. All rights reserved. Page 5 of 9
PE4134
Product Specification
Typical Performance Data @ +25 C (RF=3 dBm, IF=260 MHz) Figure 15. Conversion Loss across LO Power
-7 LO=14dBm -7.5 LO=16dBm LO=20dBm LO=18dBm
Figure 16. Input IP3 across LO Power
40 LO=20dBm 35 LO=18dBm LO=16dBm
Conversion Loss (dB)
-8 LO=10dBm
Input IP3 (dBm)
LO=12dBm -8.5
30
LO=14dBm LO=12dBm
25
LO=10dBm LO=8dBm
-9
LO=8dBm
20 LO=6dBm
-9.5 LO=6dBm -10 1750 1800 1850 1900 1950 2000 2050
15
10 1750
1800
1850
1900
1950
2000
2050
Frequency (MHz)
Frequency (MHz)
Table 5. Spurious Response
Spurious Response mRF+nLO nLO mRF 1 2 3 4
1 5 49 75 >85 2 37 55 >85 84 3 30 65 78 >85 4 50 59 80 >85
Table 6. Spurious Response
Spurious Response mRF+nLO nLO mRF 1 2 3 4
1 0 57 64 >85 2 32 49 71 >85 3 22 61 64 >85 4 43 62 65 81
Normalized to dB below PIF (RF=1900 Mhz @ 3 dBm, LO=1640 MHz @ 17 dBm)
Normalized to dB below PIF (RF=1900 Mhz @ 3 dBm, LO=1640 MHz @ 17 dBm)
(c)2006 Peregrine Semiconductor Corp. All rights reserved. Page 6 of 9
Document No. 70-0087-03 UltraCMOSTM RFIC Solutions
PE4134
Product Specification
Figure 17. Package Drawing
6-lead DFN
3.00 C L
-A-B4
6 0.125
5
C L PIN MAR 1 K 0.10 C 1 4 0.10 C 2 3
3.00
4
0.125
+2 10 -10 0.100 C
TOP VIEW
DETAIL C 0.025 0.025
0.90 0.10 0.080 C 3 0.0250.025 SIDE VIEW SEE DETAIL B
0.70 0.05 0.20 0.05 SEATING PLANE -CDETAIL B
C L 0.95 EXPOSED PAD 1 2 3
0.35 +0.08 -0.02 0.10 0.05 C
0.17 MIN. CAB 0.29 +0.21 -0.08 EXPOSED SLUG/ HEAT SINK 0.24 +0.20 -0.08 0.125 0.17 0.30
SEE DETAIL A R 0.15 TYP
R0.127 TYP 1.21 0.10 0.605 0.05 THIS FEATURE APPLIES TO BOTH ENDS OF THE PKG. DETAIL A EXPOSED METALIZED FEATURE EDGE OF PLASTIC BODY
EXPOSED (2X)
6
5
4
3 1.050.05 2.010.10
.20 MIN.
BOTTOM VIEW 1. DIMENSIONS AND TOLERANCES ARE PER ANSi Y14.5 2. DIMENSIONS ARE IN MILLIMETERS, ANGLES ARE IN DEGREES. 3 4 COPLANARITY APPLIES TO EXPOSED HEAT SLUG AS W ELL AS THE TERMINALS. PROFILE TOLERANCE APPLIES TO PLASTIC BODY ONLY.
Document No. 70-0087-03 www.psemi.com
(c)2006 Peregrine Semiconductor Corp. All rights reserved. Page 7 of 9
PE4134
Product Specification
Figure 18. Tape and Reel Specifications
6-lead DFN
Table 7. Dimensions
Dimension
Ao Bo Ko P W T R7 Quantity R13 Quantity
DFN 3x3 mm
3.23 0.1 3.17 0.1 1.37 0.1 4 0.1 8 +0.3, -0.1 0.254 0.02 3000 N.A.
Note: R7 = 7 inch Lock Reel, R13 = 13 inch Lock Reel
Table 8. Ordering Information
Order Code
4134-01 4134-02 4134-00
Part Marking
4134 4134 4134-EK
Description
PE4134-06DFN3x3-12800F PE4134-06DFN3x3-3000C PE4134-06DFN3x3-EK
Package
6-lead 3x3 mm DFN 6-lead 3x3 mm DFN Evaluation Board
Shipping Method
12800 units / Canister 3000 units / T&R 1 / Box
(c)2006 Peregrine Semiconductor Corp. All rights reserved. Page 8 of 9
Document No. 70-0087-03 UltraCMOSTM RFIC Solutions
PE4134
Product Specification
Sales Offices
The Americas Peregrine Semiconductor Corporation
9450 Carroll Park Drive San Diego, CA 92121 Tel 858-731-9400 Fax 858-731-9499
North Asia Pacific Peregrine Semiconductor K.K.
5A-5, 5F Imperial Tower 1-1-1 Uchisaiwaicho, Chiyoda-ku Tokyo 100-0011 Japan Tel: +81-3-3502-5211 Fax: +81-3-3502-5213
Europe Peregrine Semiconductor Europe
Batiment Maine 13-15 rue des Quatre Vents F- 92380 Garches, France Tel: +33-1-47-41-91-73 Fax : +33-1-47-41-91-73
Peregrine Semiconductor, Korea
#B-2402, Kolon Tripolis, #210 Geumgok-dong, Bundang-gu, Seongnam-si Gyeonggi-do, 463-480 S. Korea Tel: +82-31-728-4300 Fax: +82-31-728-4305
South Asia Pacific Peregrine Semiconductor, China
Shanghai, 200040, P.R. China Tel: +86-21-5836-8276 Fax: +86-21-5836-7652
Space and Defense Products
Americas: Tel: 505-881-0438 Fax: 505-881-0443 Europe, Asia Pacific: 180 Rue Jean de Guiramand 13852 Aix-En-Provence cedex 3, France Tel: +33(0) 4 4239 3361 Fax: +33(0) 4 4239 7227
For a list of representatives in your area, please refer to our Web site at: www.psemi.com
Data Sheet Identification
Advance Information
The product is in a formative or design stage. The data sheet contains design target specifications for product development. Specifications and features may change in any manner without notice. The information in this data sheet is believed to be reliable. However, Peregrine assumes no liability for the use of this information. Use shall be entirely at the user's own risk. No patent rights or licenses to any circuits described in this data sheet are implied or granted to any third party. Peregrine's products are not designed or intended for use in devices or systems intended for surgical implant, or in other applications intended to support or sustain life, or in any application in which the failure of the Peregrine product could create a situation in which personal injury or death might occur. Peregrine assumes no liability for damages, including consequential or incidental damages, arising out of the use of its products in such applications. The Peregrine name, logo, and UTSi are registered trademarks and UltraCMOS and HaRP are trademarks of Peregrine Semiconductor Corp.
Preliminary Specification
The data sheet contains preliminary data. Additional data may be added at a later date. Peregrine reserves the right to change specifications at any time without notice in order to supply the best possible product.
Product Specification
The data sheet contains final data. In the event Peregrine decides to change the specifications, Peregrine will notify customers of the intended changes by issuing a DCN (Document Change Notice).
Document No. 70-0087-03 www.psemi.com
(c)2006 Peregrine Semiconductor Corp. All rights reserved. Page 9 of 9

▲Up To Search▲

Price & Availability of PE4134

	To Download PE4134 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .