 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PH1955L N-channel TrenchMOS logic level FET Rev. 01 -- 15 August 2005 Product data sheet 1. Product profile 1.1 General description Logic level N-channel enhancement mode Field-Effect Transistor (FET) in a plastic package using TrenchMOS technology. 1.2 Features s Logic level threshold s 175 C rated s Low on-state resistance s Surface-mounted package 1.3 Applications s DC-to-DC converters s Motors, lamps and solenoids s General purpose power switching s 12 V and 24 V loads 1.4 Quick reference data s VDS 55 V s RDSon 17.3 m s ID 40 A s QGD = 8 nC (typ) 2. Pinning information Table 1: Pin 1, 2, 3 4 mb Pinning Description source (S) gate (G) mounting base; connected to drain (D) 1234 mb D Simplified outline Symbol G mbb076 S SOT669 (LFPAK) Philips Semiconductors PH1955L N-channel TrenchMOS logic level FET 3. Ordering information Table 2: Ordering information Package Name PH1955L LFPAK Description plastic single-ended surface mounted package; 4 leads Version SOT669 Type number 4. Limiting values Table 3: Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol Parameter VDS VDGR VGS ID IDM Ptot Tstg Tj IS ISM drain-source voltage drain-gate voltage (DC) gate-source voltage drain current peak drain current total power dissipation storage temperature junction temperature source current peak source current Tmb = 25 C Tmb = 25 C; pulsed; tp 10 s unclamped inductive load; ID = 40 A; tp = 0.06 ms; VDD 55 V; RGS = 50 ; VGS = 10 V; starting at Tj = 25 C unclamped inductive load; ID = 4 A; tp = 0.06 ms; VDD 55 V; RGS = 50 ; VGS = 10 V [1] [2] Conditions 25 C Tj 175 C 25 C Tj 175 C; RGS = 20 k Tmb = 25 C; VGS = 5 V; see Figure 2 and 3 Tmb = 100 C; VGS = 5 V; see Figure 2 Tmb = 25 C; pulsed; tp 10 s; see Figure 3 Tmb = 25 C; see Figure 1 Min -55 -55 - Max 55 55 15 40 28 160 75 +175 +175 40 160 80 Unit V V V A A A W C C A A mJ Source-drain diode Avalanche ruggedness EDS(AL)S non-repetitive drain-source avalanche energy EDS(AL)R repetitive drain-source avalanche energy - 0.8 mJ [1] [2] Duty cycle is limited by the maximum junction temperature. Repetitive avalanche failure is not determined simply by thermal effects. Repetitive avalanche transients should only be applied for short bursts, not every switching cycle. PH1955L_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 August 2005 2 of 12 Philips Semiconductors PH1955L N-channel TrenchMOS logic level FET 120 Pder (%) 80 03aa16 120 Ider (%) 80 03aa24 40 40 0 0 50 100 150 Tmb (C) 200 0 0 50 100 150 200 Tmb (C) P tot P der = ------------------------ x 100 % P tot ( 25 C) ID I der = -------------------- x 100 % I D ( 25 C) Fig 1. Normalized total power dissipation as a function of mounting base temperature 103 Fig 2. Normalized continuous drain current as a function of mounting base temperature 003aaa642 ID (A) 102 Limit RDSon = VDS / ID tp = 10 s 100 s 10 DC 1 ms 10 ms 100 ms 1 1 10 VDS (V) 102 Tmb = 25 C; IDM is single pulse Fig 3. Safe operating area; continuous and peak drain currents as a function of drain-source voltage PH1955L_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 August 2005 3 of 12 Philips Semiconductors PH1955L N-channel TrenchMOS logic level FET 5. Thermal characteristics Table 4: Symbol Rth(j-mb) Thermal characteristics Parameter Conditions Min Typ Max 2 Unit K/W thermal resistance from junction to mounting base see Figure 4 10 Zth(j-mb) (K/W) = 0.5 0.2 0.1 0.05 10-1 0.02 single pulse tp T 10-2 10-6 10-5 10-4 10-3 10-2 10-1 P 003aaa643 1 = tp T t tp (s) 1 Fig 4. Transient thermal impedance from junction to mounting base as a function of pulse duration PH1955L_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 August 2005 4 of 12 Philips Semiconductors PH1955L N-channel TrenchMOS logic level FET 6. Characteristics Table 5: Characteristics Tj = 25 C unless otherwise specified. Symbol Parameter Static characteristics V(BR)DSS drain-source breakdown voltage ID = 250 A; VGS = 0 V Tj = 25 C Tj = -55 C VGS(th) gate-source threshold voltage ID = 1 mA; VDS = VGS; see Figure 9 and 10 Tj = 25 C Tj = 175 C Tj = -55 C IDSS drain leakage current VDS = 55 V; VGS = 0 V Tj = 25 C Tj = 175 C IGSS RDSon gate leakage current drain-source on-state resistance VGS = 15 V; VDS = 0 V VGS = 5 V; ID = 25 A; see Figure 6 and 8 Tj = 25 C Tj = 175 C VGS = 4.5 V; ID = 25 A; see Figure 6 and 8 VGS = 10 V; ID = 25 A; see Figure 6 and 8 Dynamic characteristics QG(tot) QGS QGD Ciss Coss Crss td(on) tr td(off) tf VSD trr Qr total gate charge gate-source charge gate-drain charge input capacitance output capacitance reverse transfer capacitance turn-on delay time rise time turn-off delay time fall time source-drain voltage reverse recovery time recovered charge IS = 25 A; VGS = 0 V; see Figure 13 IS = 20 A; dIS/dt = -100 A/s; VGS = 0 V; VR = 30 V VDS = 30 V; RL = 1.2 ; VGS = 5 V; RG = 10 VGS = 0 V; VDS = 25 V; f = 1 MHz; see Figure 14 ID = 25 A; VDD = 44 V; VGS = 5 V; see Figure 11 18 5 8 1494 217 86 18 180 44 134 0.85 52 38 1992 260 118 1.2 nC nC nC pF pF pF ns ns ns ns V ns nC 16.3 14.3 19 40 21 17.3 m m m m 0.02 2 1 500 100 A A nA 1 0.5 1.5 2 2.3 V V V 55 50 V V Conditions Min Typ Max Unit Source-drain diode PH1955L_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 August 2005 5 of 12 Philips Semiconductors PH1955L N-channel TrenchMOS logic level FET 100 ID (A) 80 003aaa644 25 003aaa645 VGS (V) = 10 5 4.5 4 RDSon (m) 20 60 3.8 3.6 40 3.4 3.2 20 3 2.8 0 15 10 0 1 2 3 V (V) 4 DS 2 4 6 8 10 VGS (V) 12 Tj = 25 C Tj = 25 C Fig 5. Output characteristics: drain current as a function of drain-source voltage; typical values 45 RDSon (m) 38 VGS (V) = 3.2 3.4 3.6 3.8 4 4.5 5 003aaa646 Fig 6. Drain-source on-state resistance as a function of gate-source voltage; typical values 3 03ac63 a 2 31 10 24 1 17 10 0 20 40 60 80 ID (A) 100 0 -60 0 60 120 Tj (C) 180 Tj = 25 C R DSon a = ----------------------------R DSon (25 C) Fig 8. Normalized drain-source on-state resistance factor as a function of junction temperature Fig 7. Drain-source on-state resistance as a function of drain current; typical values PH1955L_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 August 2005 6 of 12 Philips Semiconductors PH1955L N-channel TrenchMOS logic level FET 2.5 VGS(th) (V) 2 max 03aa33 10-1 ID (A) 10-2 03aa36 1.5 typ 10-3 min typ max 1 min 10-4 0.5 10-5 0 -60 10-6 0 60 120 Tj (C) 180 0 1 2 VGS (V) 3 ID = 1 mA; VDS = VGS Tj = 25 C; VDS = 5 V Fig 9. Gate-source threshold voltage as a function of junction temperature 5 VGS (V) 4 VDD = 44 V VDD = 14 V 003aaa649 Fig 10. Sub-threshold drain current as a function of gate-source voltage 60 ID (A) 40 003aaa648 3 2 20 1 Tj = 175 C 25 C 0 0 5 10 15 QG (nC) 20 0 0 1 2 3 VGS (V) 4 ID = 25 A; VDD = 14 V and 44 V Tj = 25 C and 175 C; VDS > ID x RDSon Fig 11. Gate-source voltage as a function of gate charge; typical values Fig 12. Transfer characteristics: drain current as a function of gate-source voltage; typical values PH1955L_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 August 2005 7 of 12 Philips Semiconductors PH1955L N-channel TrenchMOS logic level FET 100 IS (A) 80 003aaa650 104 C (pF) 003aaa647 Ciss 103 60 Tj = 175 C Coss 40 25 C 20 102 Crss 0 0 0.4 0.8 VSD (V) 1.2 10 10-1 1 10 VDS (V) 102 Tj = 25 C and 175 C; VGS = 0 V VGS = 0 V; f = 1 MHz Fig 13. Source current as a function of source-drain voltage; typical values Fig 14. Input, output and reverse transfer capacitances as a function of drain-source voltage; typical values PH1955L_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 August 2005 8 of 12 Philips Semiconductors PH1955L N-channel TrenchMOS logic level FET 7. Package outline Plastic single-ended surface mounted package (LFPAK); 4 leads SOT669 E b2 L1 A c2 A2 C E1 b3 mounting base D1 H D b4 L2 1 e 2 3 b 1/2 e 4 wM A c X A A1 C (A 3) detail X L yC 0 2.5 scale 5 mm DIMENSIONS (mm are the original dimensions) UNIT mm A A1 A2 A3 b b2 b3 2.2 2.0 b4 0.9 0.7 c c2 D (1) D1(1) E(1) E1(1) max 5.0 4.8 3.3 3.1 e 1.27 H 6.2 5.8 L 0.85 0.40 L1 1.3 0.8 L2 1.3 0.8 w 0.25 y 0.1 8 0 1.20 0.15 1.10 0.50 4.41 0.25 1.01 0.00 0.95 0.35 3.62 0.25 0.30 4.10 4.20 0.19 0.24 3.80 Note 1. Plastic or metal protrusions of 0.15 mm maximum per side are not included. OUTLINE VERSION SOT669 REFERENCES IEC JEDEC MO-235 JEITA EUROPEAN PROJECTION ISSUE DATE 03-09-15 04-10-13 Fig 15. Package outline SOT669 (LFPAK) PH1955L_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 August 2005 9 of 12 Philips Semiconductors PH1955L N-channel TrenchMOS logic level FET 8. Revision history Table 6: Revision history Release date 20050815 Data sheet status Product data sheet Change notice Doc. number Supersedes Document ID PH1955L_1 PH1955L_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 August 2005 10 of 12 Philips Semiconductors PH1955L N-channel TrenchMOS logic level FET 9. Data sheet status Level I II Data sheet status [1] Objective data Preliminary data Product status [2] [3] Development Qualification Definition This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). III Product data Production [1] [2] [3] Please consult the most recently issued data sheet before initiating or completing a design. The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status. 10. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes in the products - including circuits, standard cells, and/or software - described or contained herein in order to improve design and/or performance. When the product is in full production (status `Production'), relevant changes will be communicated via a Customer Product/Process Change Notification (CPCN). Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. 12. Trademarks Notice -- All referenced brands, product names, service names and trademarks are the property of their respective owners. TrenchMOS -- is a trademark of Koninklijke Philips Electronics N.V. 11. Disclaimers Life support -- These products are not designed for use in life support appliances, devices, or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors 13. Contact information For additional information, please visit: http://www.semiconductors.philips.com For sales office addresses, send an email to: sales.addresses@www.semiconductors.philips.com PH1955L_1 (c) Koninklijke Philips Electronics N.V. 2005. All rights reserved. Product data sheet Rev. 01 -- 15 August 2005 11 of 12 Philips Semiconductors PH1955L N-channel TrenchMOS logic level FET 14. Contents 1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 8 9 10 11 12 13 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description. . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data. . . . . . . . . . . . . . . . . . . . . 1 Pinning information . . . . . . . . . . . . . . . . . . . . . . 1 Ordering information . . . . . . . . . . . . . . . . . . . . . 2 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 2 Thermal characteristics. . . . . . . . . . . . . . . . . . . 4 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 9 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Data sheet status . . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Contact information . . . . . . . . . . . . . . . . . . . . 11 (c) Koninklijke Philips Electronics N.V. 2005 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Date of release: 15 August 2005 Document number: PH1955L_1 Published in The Netherlands |
Price & Availability of PH1955L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |