 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RSA12L Diodes ESD Protection Device (TVS) RSA12L Applications ESD Protection Dimensions (Unit : mm) Land size figure (Unit : mm) 2.0 2.60.2 1.20.3 4.50.2 0.10.02 0.1 Construction Silicon epitaxial planar 1.50.2 2.00.2 5.00.3 PMDS Structure ROHM : PMDS JEDEC : SOD-106 Manufacture Date Taping specifications(Unit : mm) 4.00.1 2.00.05 1.550.05 1.750.1 0.3 5.50.05 1.55 2.90.1 4.00.1 2.8MAX Absolute maximum ratings (Ta=25C) Parameter Symbol Peak pulse power(tp=10x1000us) Ppk Stand off power VRMN Junction temperature Tj Storage temperature Tstg Electrical characteristics (Ta=25C) Limits 600 12 150 -55 to +150 Unit W V Parameter Breakdown voltage Clamping voltage Reverse current Symbol VBR VC IR Min. 13.3 - Typ. - Max. 14.7 19.5 2.5 Unit V V uA Conditions IR=1mA Ipp=31.0A VRMN=12.0V 5.30.1 0.05 9.50.1 120.2 4.2 Features 1) Small power mold type. (PMDS) 2) High reliability 12 L 2.0 1/2 RSA12L Diodes Electrical characteristic curves (Ta=25C) 10 10000 Ta=75 Ta=150 REVERSE CURRENT:IR (nA) Ta=125 1000 100 Ta=150 Ta=125 10 f=1MHz CAPACITANCE BETWEEN TERMINALS:Ct(nF) ZENER CURRENT:Iz(mA) 1 Ta=25 Ta=-25 Ta=75 10 1 0.1 0.01 0.001 Ta=25 0.1 1 0.01 Ta=-25 0.001 11 12 13 14 15 16 17 18 19 0.1 0 1 2 3 4 5 6 7 8 9 10 11 12 0 1 2 3 4 5 6 7 8 9 10 11 12 ZENER VOLTAGE:Vz(V) Vz-Iz CHARACTERISTICS 14.5 Ta=25 IZ=1mA n=30pcs 1 0.9 REVERSE CURRENT:IR(nA) 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 14 Vz DISRESION MAP 0 REVERSE VOLTAGEVR(V) VR-IR CHARACTERISTICS 2 Ta=25 VR=12V n=30pcs 1.9 CAPACITANCE BETWEENTERMINALS:Ct(nF) 1.8 1.7 1.6 1.5 1.4 1.3 1.2 1.1 1 IR DISRESION MAP Mounted on epoxy board REVERSE VOLTAGE:VR(V) VR-Ct CHARACTERISTICS ZENER VOLTAGE:Vz() 14.4 AVE:1.856nF Ta=25 f=1MHz VR=0V n=10pcs 14.3 14.2 AVE:14.24V 14.1 AVE:0.81nA Ct DISRESION MAP 10000 TRANSIENT THAERMAL IMPEDANCE:Rth (/W) DYNAMIC IMPEDANCE:Zz() 1000 IM=10mA IF=0.5A 30 Rth(j-a) ELECTROSTATIC DISCHARGE TEST ESD(KV) No break at 30kV 25 20 15 10 5 0 No break at 30kV 1000 1ms time 100 300us 100 10 Rth(j-c) 10 1 1 0.1 1 ZENER CURRENT(mA) Zz-Iz CHARACTERISTICS 10 0.1 0.001 0.01 1 10 100 TIME:t(s) Rth-t CHARACTERISTICS 0.1 1000 C=200pF R=0 C=100pF R=1.5k ESD DISPERSION MAP 2/2 Appendix Notes No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document are no antiradiation design. The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction. Appendix1-Rev1.1 |
Price & Availability of RSA12L
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |