Part Number Hot Search : 
NTE1838 LTC37 DUG12C BUZ80 CAT25C03 ELM97 M38503 1050N4
Product Description
Full Text Search
 

To Download SP8064CG1 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 PRELIMINARY
SP8064
High Speed 10-channel Photo Detector IC
FEATURES
* * * * * * Dual wavelength 650nm and 780nm Data channel bandwidth 120 MHz (-3dB) Nine selectable gain settings Group delay error less than 0.5ns up to 72MHz 6ns settling time 16-pin Molded FLGA package A D Vcc RF+ RFGND B C 1 2 3 4 5 6 7 8 SP8064 16-Pin FLGA 16 15 14 13 12 11 10 9 E G Vref C/D H/L R/W F H
APPLICATION
* * * * x16 DVD +R Read and Write x12 DVD +RW Read and Write x4 DVD Dual layer write X48 CD Read X48 CD-R Write
*
GENERAL DESCRIPTION
The SP8064 is a ten-channel photo detector IC (PDIC) designed for DVD and CD applications operating at wavelengths of 650 and 780 nm. The device contains three photo diode (sensor) arrays, one of them with four identical sensors A - D and the other two with two sensors (E, F and G, H respectively). The ten channels consist of four high speed channels (A, B, C, and D), four slow channels (E, F, G, and H), and two RF channel with balanced differential outputs (RF+ and RF-). Channels A through D are high bandwidth data channels, while E through H are used to generate tracking information. The RF channels output the sum of A + B + C + D channels with identical weights given to all channels. Three Gain select inputs (R/W, H/L, C/D) allow setting of eight gain modes and a Power Down mode with low power consumption if H/L and C/D inputs are left floating or driven to Hi-Z and low logic levels respectively. The SP8064 is manufactured with an advanced 10GHz BICMOS technology.
Rev 0.He (09-26-05) SP8064 Ten-Channel Photo detector IC Copyright 2005 Sipex Corporation SIPEX RESERVES THE RIGHT TO MAKE CHANGES TO THIS DATASHEET. CALL FOR UPDATES: 1-408-934-7500.
SIPEX CONFIDENTIAL, PRELIMINARY & PROPRIETARY. DO NOT DISTRIBUTE OR COPY page 1 of 4
PRELIMINARY
GAIN MODE SELECTION
Gain Mode R/W H/L C/D
SP8064
Writing DVD+R 0 0 0 Writing CD-R (sample) 0 0 1 Writing CD-R (average) 0 Hi-Z 1 Writing DVD+RW 0 1 0 Writing CD-RW 0 1 1 Reading DVD-ROM 1 0 0 Reading CD-ROM 1 0/Hi-Z 1 Reading DVD+RW 1 1 0 Reading CD-RW 1 1 1 Power Down Mode* X Hi-Z 0 * If no logic inputs are applied to gain select pins, Power Down Mode is default mode.
PIN ASSIGNMENTS
Land # 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Pin Name A D Vcc RF+ RFGND B C H F R/W H/L C/D Vref G E Pin Function Output of A channel Output of D channel Supply voltage. Bypass to GND with ceramic capacitor 0.1uF Output of RF+ channel. RF+ = A + B + C + D Output of RF- channel. RF- = - (A + B + C + D) Ground pin Output of B channel Output of C channel Output of H channel Output of F channel Mode switch input. Mode switch input. Mode switch input. Reference voltage. Bypass to GND with ceramic capacitor 0.1uF Output of G channel Output of E channel
BOARD LAYOUT AND GROUNDING
To obtain the best performance from the SP8064, a printed circuit board with ground plane is required. Ground pins (pin #6) should be connected to the ground plane. High quality, low series resistance ceramic 0.1uF bypass capacitors should be used at the Vcc and Vref pins (pins #3 and #14). These capacitors must be located as close to the pins as possible. A Vref decoupling capacitor to ground should be used. The traces connecting the pins to the ground plane, Vcc, Vref, and bypassing capacitors must be kept short and should be made as wide as possible.
Rev 0.He (09-26-05) SP8064 Ten-Channel Photo detector IC Copyright 2005 Sipex Corporation SIPEX RESERVES THE RIGHT TO MAKE CHANGES TO THIS DATASHEET. CALL FOR UPDATES: 1-408-934-7500.
SIPEX CONFIDENTIAL, PRELIMINARY & PROPRIETARY. DO NOT DISTRIBUTE OR COPY page 2 of 4
PRELIMINARY
Molded FLGA 16L PACKAGE DIMENSIONS
SP8064
Rev 0.He (09-26-05) SP8064 Ten-Channel Photo detector IC Copyright 2005 Sipex Corporation SIPEX RESERVES THE RIGHT TO MAKE CHANGES TO THIS DATASHEET. CALL FOR UPDATES: 1-408-934-7500.
SIPEX CONFIDENTIAL, PRELIMINARY & PROPRIETARY. DO NOT DISTRIBUTE OR COPY page 3 of 4
PRELIMINARY
PHOTO DETECTOR PATTERN
SP8064
Note: 1. Detector size units: m 2. Separation between segments < 5 m
ORDERING INFORMATION Part number
SP8064CG1 0 + 700C
Temperature range
Package Type
16-pin Molded Flexible Land Grid Array (FLGA)
Rev 0.He (09-26-05) SP8064 Ten-Channel Photo detector IC Copyright 2005 Sipex Corporation SIPEX RESERVES THE RIGHT TO MAKE CHANGES TO THIS DATASHEET. CALL FOR UPDATES: 1-408-934-7500.
SIPEX CONFIDENTIAL, PRELIMINARY & PROPRIETARY. DO NOT DISTRIBUTE OR COPY page 4 of 4


▲Up To Search▲   

 
Price & Availability of SP8064CG1

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X