 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| version 1.5 01.02.2001 ______________________________________________________________________________________________________ TFS124.doc VI TELEFILTER Filter Specification TFS 124 1/5 ______________________________________________________________________________________________________ Measurement condition Ambient temperature: 23 C Input power level : 5 dBm Terminating impedances for input: 1,2 kOhm // -3,3 pF for output: 1,2 kOhm // -3,3 pF External coil: 292 nH // 4 kOhm Characteristics Remark: Reference level for the relative attenuation arel of the TFS 124 is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre frequency fc is the arithmetic mean value of the upper and lower frequencies at the 3dB filter attenuation level relative to the insertion loss ae. The nominal frequency fN is fixed on 124,8 MHz without tolerance. The given values for the relative attenuation arel and for the group delay ripple have to be reached at the frequencies given below also if the centre frequency fc is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fc. Data ______________________________________________________________________________________________________ Insertion loss max 4 dB ae 2,7 dB (Reference level) ______________________________________________________________________________________________________ Centre frequency 124,79 MHz fc ______________________________________________________________________________________________________ Nominal frequency 124,8 MHz fN ______________________________________________________________________________________________________ 3 dB bandwidth 173 kHz min 52 kHz ______________________________________________________________________________________________________ Relative attenuation arel fN ... fN 26 kHz 1 dB max 3 dB fN 125 kHz ... fN 250 kHz 6 dB fN 250 kHz ... fN 0,7 MHz 37 dB fN + 0,7 MHz ... fN + 30 MHz 36 ... 65 dB min 35 dB fN - 0,7 MHz ... fN 10 MHz 36 ... 65 dB min 35 dB fN - 10 MHz ... fN 17 MHz 36 ... 65 dB min 34 dB fN - 17 MHz ... fN 30 MHz 36 ... 65 dB min 35 dB ______________________________________________________________________________________________________ Group delay ripple fN 26 kHz 0,45 s max 0,75 s ______________________________________________________________________________________________________ Input power level max 10 dBm ______________________________________________________________________________________________________ Intermodulation in the composite signal by 85 dBm max -60 dBm fN + 50 kHz and fN + 100 kHz each of -14 dBm 85 dBm max -60 dBm fN - 50 kHz and fN - 100 kHz each of -14 dBm ______________________________________________________________________________________________________ Temperature coefficient of frequency (* TCf) - 0,032 ppm/K Frequency inversion temperature (To) 20 C Operating temperature range - 40 C ... + 85C Storage temperature range - 40 C ... + 85C ______________________________________________________________________________________________________ *) f(Hz) = TC (ppm/K) x (T) x f (MHz f To *) fTo is reference frequence fc at frequency inversion temperature (To) typ. Value tolerance / limit Generated: Checked / approved: ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com ______________________________________________________________________________________________________ VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information TFS124.doc version 1.5 01.02.2001 ______________________________________________________________________________________________________ VI TELEFILTER Filter Specification TFS 124 2/5 ______________________________________________________________________________________________________ Construction, pin configuration and 50 - matching network (all dimensions in mm) TFS 124 N04 DateCode Pin 1 Pin 2,4,5,7,8,9,10 Pin 3 Pin 6 Output Ground External coil Input Datecode: L M N ... Year+week 1999 2000 2001 50 Ohm Test circuit 1 L1 6 1 L2 C1 SAW 3 2, 4, 5, 7, 8, 9, 10 L3 C2 50 Ohm Test circuit 2 C1 6 1 C2 L1 SAW 3 L3 L2 2, 4, 5, 7, 8, 9, 10 ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com ______________________________________________________________________________________________________ VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information TFS124.doc version 1.5 01.02.2001 ______________________________________________________________________________________________________ VI TELEFILTER Filter Specification TFS 124 3/5 ______________________________________________________________________________________________________ Stability Characteristics After the following tests the filter shall meet the whole specification: 1. Shock: 2. Vibration: 3. Damp heat: (cycle) 4. Resistance to solder heat (reflow): 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 25 C to 55C / 95% r.H. / 10 cycles DIN IEC 68 - 2 - 30 Db max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; Packing Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: Real of empty components at start: Real of empty components at start including leader: Trailer Tape (all dimensions in mm) W Po Do E F : : : : : 16 0,3 Do Po P2 EMBOSSED CARRIER TAPE 2000 min 300 mm min 500 mm min 300 mm 4 0,1 1,5 + 0,1 1,75 0,1 7,5 0,1 0,6 2 0,1 12 1,5 7,6 9,6 0,1 CT E Ao F W G (min) : P2 : P1 : D1(min) : Ao : Bo CT : : D1 Bo G 0,1 0,1 COVER TAPE P1 13,5 + 0,1 W2 Reel (all dimensions in mm): A W1 W2 (max) : N (min) C : : : : 330 16,4 +2 22,4 60 C A N 12,8 0,1 W1 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tape. ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com ______________________________________________________________________________________________________ VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information TFS124.doc version 1.5 01.02.2001 ______________________________________________________________________________________________________ VI TELEFILTER Filter Specification TFS 124 4/5 ______________________________________________________________________________________________________ Air reflow temperature conditions 1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods 150 C - 170 C 60 sec. - 90 sec. main-heating periods over 200 C 20 sec. - 25 sec. peak temperature 255 C 5 C Chip-mount air reflow profile 260 240 220 200 180 temperature / C 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 time / sec. 140 160 180 200 220 240 Table for temperature vs. time during the air reflow process Tolerance of temperatures: 5 C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / C 160 161 164 170 180 205 230 255 230 205 180 165 140 120 ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com ______________________________________________________________________________________________________ VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information TFS124.doc version 1.5 01.02.2001 ______________________________________________________________________________________________________ VI TELEFILTER Filter Specification TFS 124 5/5 ______________________________________________________________________________________________________ History Version 1.1 1.2 1.3 Reason of Changes Generation of development specification Add termination impedances Change from development specification to filter specification Add typical filter data State limit value for group delay ripple Correct tape and reel information Change group delay to group delay ripple Increase stop band attenuation from 33 dB to 34-35 dB Correct stop band attenuation in lower stop band Name Dr. Wall Dr. Wall Dr. Wall Date 10.05.2000 21.12.2000 24.01.2001 1.4 Dr. Wall 29.01.2001 1.5 Dr. Wall 01.02.2001 ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-0 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com ______________________________________________________________________________________________________ VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information |
Price & Availability of TFS124
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |