View TX18D16VM1CAA_4100157.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

w
w
at .D w
Sh a
ee
4U t
om .c
Hitachi Displays, Ltd.
Date; Sep. 8, 2003
For Messrs.
Hitachi Europe Ltd.
CUSTOMER'S ACCEPTANCE SPECIFICATIONS
TX18D16VM1CAA
CONTENTS No.
1 2 3 4 5 6 7 8 9 10 COVER RECORD OF REVISION DESCRIPTION ABSOLUTE MAXIMUM RATINGS OPTICAL CHARACTERISTICS BLOCK DIAGRAM ELECTRICAL CHARACTERISTICS INTERFACE PIN CONNECTION INTERFACE TIMING DIMENSIONAL OUTLINE
Item
3284PS 2601-TX18D16VM1CAA-1 3284PS 2602-TX18D16VM1CAA-1
DESIGNATION OF LOT MARK COSMETIC SPECIFICATIONS PRECAUTIONS
Accepted by :
w
Please return 1 copy with your signature on this page for approval. Proposed by :
w
w
t a .D
S a
e h
3284PS 2603-TX18D16VM1CAA-1 3284PS 2604-TX18D16VM1CAA-1 3284PS 2605-TX18D16VM1CAA-1 3284PS 2606-TX18D16VM1CAA-1 3284PS 2607-TX18D16VM1CAA-1 3284PS 2608-TX18D16VM1CAA-1 3284PS 2609-TX18D16VM1CAA-1 3284PS 2610-TX18D16VM1CAA-1 3284PS 2611-TX18D16VM1CAA-1 3284PS 2612-TX18D16VM1CAA-1 3284PS 2613-TX18D16VM1CAA-1
U t4 e
Sheet No.
.c
m o
Page
1-1/1 2-1/1 3-1/1 4-1/1 5-1/2 - 5-2/2 6-1/1 7-1/1 8-1/2 - 8-2/2 9-1/3 - 9-3/3 10-1/1 11-1/1 12-1/3 - 12-3/3 13-1/3 - 13-3/3
Date :
Hitachi Displays, Ltd.
Sh. No.
3284PS 2601-TX18D16VM1CAA-1 Page 1-1/1
w
w
w
.D
at
aS
ee h
4U t
om .c
CAS-S03-154
RECORD OF REVISION The upper section:Bef ore rev ision The lower section:Af ter rev ision Sheet No. Page
Date
Summary
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2602-TX18D16VM1CAA-1
Page
2-1/1
DESCRIPTION The specifications are applied to the following TFT Liquid Crystal Display Module with Back-light unit. Note : Inverter device for Back-Light is not built in, so it should be prepared by yourself .
Product name Effective Display Area Display Dots (Display Pixels) Pixel Pitch Color Pixel Arrangement Display Mode Surface Polarizing Film Number of Colors Interface Color Saturation Viewing Angle Backlight Dimensions Outline Weight
TX18D16VM1CAA (H)152.4 x (V)91.44 (H)(800x3) x (V)480 (H 800 x V 480) (H)0.1905 x (V)0.1905 R+G+B Vertical Stripe Transmissive Mode, Normally White Mode Polarizing Film with Antiglare Coating 262k C-MOS, R.G.B x 6 bit Digital each 60%(typ) for NTSC 12 o'clock. (The direction it's hard to be discolored) CCFL, 1pc Side-light type (U shape) (H)165.0(typ) x (V)106.0(typ) x (t)10.5(max) Approximately 170 [mm] [g] [colors] [mm] [dots] [pixels] [mm]
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2603-TX18D16VM1CAA-1
Page
3-1/1
1. ABSOLUTE MAXIMUM RATINGS
1.1 ENVIRONMENTAL ABSOLUTE MAXIMUM RATINGS
Operating Item Temperature Humidity Vibration Shock Corrosive Gas Illumination at LCD Surface Min.
0
Non-operation Min.
-20
Max.
70
Max. 70
2) 4.9 (0.5G) Y Y * * * * * * Not Acceptable @@@@@@ Y 50,000
2) 19.6 (2G) Y 490 (50G) Y * * * * * * Not Acceptable @@@@@@ Y 50,000
Unit *Z %RH m/s2 m/s2
Note 1) 1) 3) 4)
lx
Notes 1) "Temperature" and "Humidity" shall be at glass surface of a TFT-LCD Module, not in the system installed with the Module. It's should not be over these absolute maximum ratings at any position of a TFT-LCD Module. Operating temperature means the temperature a TFT-LCD Module can be driven, not mean guarantee the screen performance (contrast,brightness,response time etc) is judged at Ta=25deg.C At low temperature the brightness of CCFL drop and the life time of CCFL become to be short. 2) Ambient temp. Ta*... *Z : 85 % RH Max. Without condensation. 40 Ta*40 *Z: Absolute humidity must be lower than the humidity of 85 % at 40 deg.C. Without condensation. 3) Frequency of the vibration shall be between 20 Hz and 50 Hz. (except resonance point) 4) Pulse width of the shock shall be 7 ms. 1.2 ELECTRICAL ABSOLUTE MAXIMUM RATINGS (1) TFT LIQUID CRYSTAL DISPLAY MODULE *@
Item Power Supply Voltage for logic Input signal Voltage for logic Electrostatic Durability
Symbol VDD VI VESD0 VESD1
Min. Max. 4.0 0 -0.2 VDD+0.2 100 *@*@*@*@*@*@*} *@*@*@*@*@*@*} 8
Unit V V V kV
VSS=0V Note
1) 2), 3) 2), 4)
Notes 1) 2) 3) 4)
The specification is applied to pixel data signal,timing signal and clock signal. Discharge circuit to be connected : 200 pF - 250 , Environmental : 25*Z- 70 % RH The specification is applied to I/F connector pins. The specification is applied to the surface of both a metal bezel and a LCD panel.
(2) BACK-LIGHT UNIT
GND=0V
Item Lamp Current Lamp Voltage
Symbol IL VL
Min. -
Max. 7.0 2000
Unit mArms Vrms
Note 1) 2)
Notes 1) To be measured at GND terminal side 2) The specification is applied at connector pins for back-light units .
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2604-TX18D16VM1CAA-1
Page
4-1/1
2. OPTICAL CHARACTERISTICS
The following items are measured on the conditions that this unit operation (TFT panel and the Back-light) and measuring systems are stable. It takes about 15 minutes. The ambient light excluding The Back-light unit is nothing. *E Measuring equipment : TOPCON BM-7,Prichard 1980A, or equivalent *E Measuring point : Active area center
Ta = 25 *Z VDD = 3.3 V, fV = 60 Hz, IL= 4.0mA ,
Item Contrast Ratio Response Time
RISE FALL
Brightness (White) Brightness Uniformity Color Position Red on CIE Green Blue White x *| x' Viewing Angle (CR*10) y *| y'
Symbol CR ton toff Bwh Buni x y x y x y x y AEx AEx' AEy AEy'
Conditions
Min. 100 Y Y 300 70 0.57 0.29 0.24 0.55 0.09 0.02 0.25 0.26 50 50 50 50
AE=0*Z 1)
AE=0* AE=180* AE=90* AE=270*
Typ. 200 20 10 350 Y 0.62 0.34 0.29 0.60 0.14 0.07 0.30 0.31 Y Y Y Y
Max. Y 40 20 Y Y 0.67 0.39 0.34 0.65 0.19 0.12 0.35 0.36 Y Y Y Y
Unit ms ms cd/m2 %
Note 2) 3) 3) 4)
Y
deg.
1)
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2605-TX18D16VM1CAA-1
Page
5-1/2
Notes 1)
Definition of Viewing Angle O** 90* Y *i12 o'clock*j
AE** 0* Z AE
eye (Viewing Angle)
(Azimuth) O O** 180* *i9 o'clock*j X' O** 0* X*i3 o'clock*j
TFT - LCD Module Z' 2) Definition of Contrast Ratio(CR): (Luminance at displaying WHITE ) CR ** (Luminance at displaying BLACK) Y'
O** 270* *i6 o'clock*j
3) Definition of Response Time Displaying data signal BLACK ton % 100 90 Optical Response *iLuminance*j 10 0 WHITE BLACK toff
4) Definition of Brightness Uniformity
Display Area
The brightness uniformity (Buni) is defined as the following equation. (2) Buni = Bmin Bmax *~ 100
% 90
Display Area
(1) (3) (4)
50 10
(5) 90 %
where, Bmax = Maximum brightness among 5 measuring points Bmin = Minimum brightness among 5 measuring points
50 10 :measuring point
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2605-TX18D16VM1CAA-1
Page
5-2/2
3. ELECTRICAL CHARACTERISTICS
3.1 TFT LIQUIDO CRYSTAL DISPLAY MODULE Ta** 25*Z*C VSS** 0V
Item Power Supply Voltage Input Voltage for Logic Circuits Power Supply Current VSYNC Frequency HSYNC Frequency DCLK Frequency
Hi Lo
Symbol VDD VIH VIL IDD fV fH fCLK
Min. 3.0 2.0 VSS Y Y Y Y
Typ. 3.3 Y Y 250 60 31.6 33.3
Max. 3.6 VDD 0.8 350 75 39.2 40
Unit V V V mA Hz kHz MHz
Note 1) 1) 2), 3)
Notes 1) The specification is applied to pixel data signal,timing signal and clock signal. 2) fV** 60Hz*C fCLK** 33.3 MHz, VDD** 3.3V, DC Current. TFT -LCD Module DC Ampere Meter VDD
VSS
Typical value is measured when displaying Black raster. Maximum is measured when displaying Vertical-stripe pattern of 2 pixel pitch. 3) Current capacity for VDD power source should be larger than 2A. This TFT-LCD Module has a fuse(1A). 3.2 BACK-LIGHT UNIT Ta** 25*Z
Item Lamp Current Lamp Voltage Frequency Starting Lamp Voltage
Symbol IL VL fL VS
Min. 2.0 Y 50 1400 1600
Typ. 3.0 1000 Y Y Y
Max. 4.0 Y 70 2000 2000
Unit mArms Vrms kHz Vrms
Note 1),3) 2) Ta=25deg. C Ta=0deg. C
Notes 1) Larger IL causes the shorter life of a CCFL. 2) Frequency of power supply for a CCFL may cause interference with HSYNC frequency and causes beat or flicker on the display. Therefore, lamp frequency shall be as different as possibl e from HSYNC frequency in order to avoid the interference. 3) To be measured at GND terminal side 4) Starting Lamp Votage should be kept 1 sec at least. 5) The inverter should be built-in a safety circuit which detects over current, over voltage and distorted wave form of lamp current.
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2606-TX18D16VM1CAA-1
Page
6-1/1
4. BLOCK DIAGRAM
4.1 TFT-LCD MODULE
CN1 Display data and timing signal G1 Timing Conv erter
Gate Driver
G2
TFT-LCD
G480
DC power supply
DC/DC Conv erter
D1 D2 Drain Driv er
D2400
4.2 BACK-LIGHT UNIT
CN2 GND VL 3 2 1 Lamp
Color of wires f rom CCFL to CN2 3*@*i GND*j*F White 1 *iVL*j *F Pink
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2607-TX18D16VM1CAA-1
Page
7-1/1
5. INTERFACE PIN CONNECTION
5.1 TFT-LCD MODULE CN1 *s JAE *G FA5B040HF1R3000*t
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
Notes 1) 2) 3) 4)
Symbol VDD VDD VDD VDD NC DTMG VSS NC VSS (IC) VSS B5 B4 B3 VSS B2 B1 B0 VSS G5 G4 G3 VSS G2 G1 G0 VSS R5 R4 R3 VSS R2 R1 R0 (IC) VSS VSS DCLK VSS VSS
Description Power Supply (typ.+3.3V)
Note 1)
Non-Connect Display Timing GND (0V) Non-Connect GND (0V) GND (0V) Blue Data GND (0V) Blue Data GND (0V) Green Data GND (0V) Green Data GND (0V) Red Data GND (0V) Red Data
4) 2) 4) 2) 3) 2)
2)
2)
2)
2)
2)
GND (0V) Dot Clock GND (0V)
3) 2)
2)
All VDD pins shall be connected to +3.3V(Typ.). All VSS pins shall be grounded. Metal bezel is internally connected to VSS. Keep open electrically. Hitachi test use only. Unconnected to the module
5.2 BACK-LIGHT UNIT CN2 *s J.S.T. *G BHR-03VS-1 *t
Pin No. 1 2 3
Symbol VL NC GND
Description Power Supply No connection GND(0V)
Sheet No.
Note
Hitachi Displays, Ltd.
Date
Sep.8,2003
3284PS 2608-TX18D16VM1CAA-1
Page
8-1/2
5.3 RELATIONSHIP BETWEEN DISPLAYED COLOR AND INPUT DATA
Red Data Input Color Black Red (0) Green (0) Basic Color Blue (0) Cyan Magenda Yellow White Black Red (62) Red (61) Red : : Red (2) Red (1) Red (0) Black Green (62) Green (61) Green : : Green (2) Green (1) Green (0) Black Blue (62) Blue (61) Blue : : Blue (2) Blue (1) Blue (0)
MSB LSB MSB
Green Data
LSB MSB
Blue Data
LSB
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 0 1 0 0 0 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 1 0 0 0 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 1 0 0 0 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 1 0 0 0 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 1 0 0 0 1 1 1 0 0 1 : : 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 1 0 0 0 1 1 1 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0 0 0 1 : : 0 1 1 0 0 0 : : 0 0 0 0 0 1 0 1 0 1 1 0 0 0 : : 0 0 0 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 1 : : 0 1 1 0 0 0 1 1 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 1 0 : : 1 0 1
Notes 1) Definition of gray scale: Color(n)*E*E*E*E Number in parenthesis indicates gray scale level. Higher n corresponds to darker level. 2) Data: 1:High, 0:Low
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2608-TX18D16VM1CAA-1
Page
8-2/2
6. INTERFACE TIMING
6.1 TIMING CHART
(Data : Latched at Fall edge of DCLK)
t Hr , tVr t Ir , tDr
VIH min. VILmax.
t Hf, tVf t If, tDf
VSYNC*C HSYNC*C DTMG*C R0*5*C G0*5*C B0*5
t WC t CLK
DCLK 1.5V
H
t WCL
t fCLK
t rCLK
t CLKL
DATA Inv alid Data
t HD
t SD
Inv alid Data
t HI
DTMG
t SI
DCLK
t HH
Hsy nc
t SH
t SV
Vsy nc
t HV
t HP
Hsy nc
t WH t HBP t HFP
DTMG
t VP
Vsy nc
t WV t VBP t VFP
DTMG
* The DTMG signal for this module is defined as above-mentioned timings for Vsync and Hsync. This module synchronizes with only DTMG and don't require inputting Vsync and Hsync signals. During Blanking priod, DTMG should be "Low" level
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2609-TX18D16VM1CAA-1
Page
9-1/3
6.2 INTERFACE TIMING SPECIFICATIONS
*@*@*@*@*@*@*@*-U Item
DCLK
Period Width-Low Width-Hi Rise Time Fall Time Duty
Symbol t CLK
t WCL t WCH t rCLK t fCLK D t SH t HH t HP t WH t Hr ,t Hf t SV t HV t VP t WV t Vr ,t Vf t SI t HI t Ir ,t If t HBP t HFP t VBP t VFP t SD t HD t Dr ,t Df
Min. 25 12 12 Y Y 0.45 5 10 944 4 Y 0 2 515 1 Y 5 10 Y 7 Y 4 Y 5 10 Y
Typ. 30 Y Y Y Y 0.5 Y Y 1056 128 Y Y Y 525 2 Y Y Y Y 88 40 32 11 Y Y Y
Max. 33 Y Y 25 25 0.55 Y Y 1088 Y 30 Y Y 610 Y 50 Y Y 30 Y Y Y Y Y Y 25
Unit
Note
ns
Y
ns t CLK
D=t CLKL/t CLK for DCLK
Hsync
Set up Time Hold Time Period Width-Active Rise/Fall Time
ns
t CLK for Hsync
Vsync
Set up Time Hold Time Period Width-Active Rise/Fall Time
t HP
ns
ns for DCLK
DTMG
Set up Time Hold Time Rise/Fall Time Horizontal Back porch Horizontal Front porch Vertical Back porch Vertical Front porch
ns
t CLK t HP ns
DATA
Set up Time Hold Time Rise/Fall Time
for DCLK
ns
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2609-TX18D16VM1CAA-1
Page
9-2/3
6.3 TIMING BETWEEN INTERFACE SIGNAL AND POWER SUPPLY
ON
Power Supply Voltage
VDD(t)
0.8V
3.0V
3.0V
OFF
Input Signals
VI(t)
2.0V 0.8V
t1
t2 t3 t4
t5
t6
t7
Back Light
POWER ON
POWER OFF 5ms *... t4 0ms *... *... 45ms t5 0ms *... *... 20ms t6 0.4s
*...
t1 *... 15ms 0ms *t2 *... 45ms 0.1s *... t3
t7
Note 1) Set 0V *... *... VI(t) VDD(t)*D Here,VI(t),VDD(t) indicate the transitional state of VI,VDD when power supply is turned ON or OFF. 2) Do not keep interface signal high-impedance when power on.
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2609-TX18D16VM1CAA-1
Page
9-3/3
7.DIMENTIONAL OUTLINE
7.1 Surface side
106.0 *}0.5 4.98*}0.3 (2.0) 95.44*}0.3 (91.44)
(52.7)
10.5max
Unit:mm
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2610-TX18D16VM1CAA-1
Page
10-1/2
7.2 Back side
(19.0)
Note1)CN1:FA5B040HF1R3000(JAE) 2)CN2:BHR-03VS-1(JST) Unit:mm
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2610-TX18D16VM1CAA-1
Page
10-2/2
8. DESIGNATION OF LOT MARK
8.1 LOT MARK
5 digits for production number *i00001*99999*j Special mark*@ 4) Production management sign*@ Week*@ 3) Month*@ 2) Year*@ 1) Notes 1) Year 2003 2004 2005 2006 2007 Mark 3 4 5 6 7 2) Month 1 2 3 4 5 6 Mark 01 02 03 04 05 06 Month 7 8 9 10 11 12 Mark 07 08 09 10 11 22*28 12 29*31 4) The special mark may be added by manufacturing accordingly to production number. 8.2 REVISION(REV.) CONTROL REV. column is controlled by the manufacturing. A-Z except I and O is to be written on this column. 8.3 LOCATION OF LOT MARK Lot mark is printed on a label.The label is on rear side of module as shown in the drawing at Section 7. The style of character may be changed without notice. 5 4 1*7 8*14 15*21 1 2 3 3) Week*iDays*j Mark
HITACHI
LOT MARK REV. column Note 1
TX18D16VM1CAA 0123H 00001
REV
*"d'*O *@ HIGH VOLTAGE CAUTION
Note 1 Product Country
Product Country JAPAN Print on Label JAPAN TAIWAN R.O.C.
MADE IN *****
AA 00 00 6 H 09 726192
TAIWAN
-{fXvOECj"aIOEuOEoSCEI*...aSUUeAeU**t*fXvOECI"pSu B bg B B E"-1/2AAI'n*uZ(c)Z`II*--aU1/2IK`E*]AA"pSuA*B COLD CATHODE FLUORESCENT LAMP IN COLOR LCD CONTAINS MERCURY. PLEASE FOLLOW LOCAL ORDINANCES OR REGULATIONS FOR ITS DISPOSAL.
Product Country on the Label shall be printed as shown in above Fig. based on product country.
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2611-TX18D16VM1CAA-1
Page
11-1/2
8.4 Example of product label
8.4.1*@ Made in JAPAN
HITACHI
TX18D16VM1CAA 0123H 00001
REV
*@ HIGH VOLTAGE CAUTION
*"d'*O
A
MADE IN JAPAN
E0 02 90 2 G W Y032167
-{fXvOECj"aIOEuOEoSCEI*...aSUUeAeU**t*fXvOECI"pSu B bg B B E"-1/2AAI'n*uZ(c)Z`II*--aU1/2IK`E*]AA"pSuA*B COLD CATHODE FLORESCENT LAMP IN COLOR LCD CONTAINS MERCURY. PLEASE FOLLOW LOCALORDINANCES OR REGULATIONS FOR ITS DISPOSAL.
8.4.2*@ Made in TAIWAN R.O.C
HITACHI
TX18D16VM1CAA 0123T 00001
REV
*"d'*O *@ HIGH VOLTAGE CAUTION
A
MADE IN TAIWAN R.O.C.
T0 09 00 2 E V B335168
-{fXvOECj"aIOEuOEoSCEI*...aSUUeAeU**t*fXvOECI"pSu B bg B B E"-1/2AAI'n*uZ(c)Z`II*--aU1/2IK`E*]AA"pSuA*B COLD CATHODE FLORESCENT LAMP IN COLOR LCD CONTAINS MERCURY. PLEASE FOLLOW LOCALORDINANCES OR REGULATIONS FOR ITS DISPOSAL.
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2611-TX18D16VM1CAA-1
Page
11-2/2
9.COSMETIC SPECIFICATIONS
9.1 Condition for cosmetic inspection (1) Viewing zone a) The figure shows the correspondence between eyes (of inspector) and TFT-LCD module. AE*... : when non-operating inspection 45*K * * * * AE*... : when operating inspection @@@@ 5*K b) Inspection should be executed only from front side and only A-zone. Cosmetic of B-zone and C-zone are ignored. (refer to 9.2 Definition of zone)
Inspection view Light
about 300mm
AE AE
TFT-LCD Module (2) Environmental a) Temperature : 25 deg.C The appearance inspection at Back-light on is done at 25 deg.C on a TFT-LCD panel. b) Ambient light : More than 2000 [lx] and non-directive. c) Back-light : when non-operating inspection, Back-light should be off. (3) Operating inspection Operating inspection should be done with 8 color mode (without gray scale). 9.2 Definition of zone
* * * * * * * * * * * * * * * * * * * * * * * *E @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ @ A-zone : Display area (pixel area) * * * * * * * * * * * * * * * * * * * * * * * * -zone : Area between A-zone and C-zone* * * * * * * @@@@@@@@@@@@@@@@@@@@@@@ a E @@@@@@@ *************** @@@@@@@@@@@@@@@ *@ * -zone : Metallic bezel area (include I/F connector) b E
-zone a-zone b-zone
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2612-TX18D16VM1CAA-1
Page
12-1/3
9.3 COSMETIC SPECIFICATIONS When displaying conditions are not stable (ex. at turn on or off), the following specifications are not applied.
No. 1
ITEM 1-dot 2-dots Dot defect Sparkle mode 3-dots 4-dots Density Total 1-dot Black mode 2-dots 3-dots 4-dots Density Total Total
Max. acceptable number
A-zone 4 1 0 0 2 5 5 2 0 0 3 5 10 Serious one is not allowed L:Ignore L<=2.0 L>2.0 W<=0.06 W>0.06 L<=1.0 L>1.0 Ignore 10 0 10 0 (See dot shape) Ignore 5 0 Ignore 10 0 10 0 Ignore 10 0
Unit pcs
Note 1),2),4) 1),2),5) 1),2),6) 1),2) 1),3),4) 1),3),5) 1),3),6) 1),3) 1) -
Units
pcs/O 20mm
pcs pcs
Units
pcs/O 20mm
pcs pcs -
2 3 4
Line defect Uneven brightness Strain inclusion Line shape W: widht(mm) L: length(mm) W<=0.02 W<=0.03
pcs
7)
5
Strain inclusion Dot shape D: ave.dia(mm)
Scratch on polarizer
D<=0.22 D<=0.33 D>0.33 W<=0.01 W<=0.02 W<=0.04 L:Ignore L<=40 L>40 L<=20 L>20
pcs
7)
6
Line shape W: widht(mm) L: length(mm)
Scratch on polarizer
pcs
8)
7
D<=0.2 D<=0.4 D>0.4
Dot shape D: ave.dia(mm)
pcs
8)
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2612-TX18D16VM1CAA-1
Page
12-2/3
No. 8
ITEM
Bubbles, peeling in polarizer
Max. acceptable number
Unit
Note
A-zone D<=0.3 D<=0.5 D<=1.0 D>1.0 9 Wrinkles on polarizer Ignore 10 5 0 Serious one is not allowed pcs 8)
D: ave.dia(mm)
-
-
Note 1) Dot defect : defect area > 1/2 dot 2) Sparkle mode : brightness of dot is more than 30% at black raster. (visible to eye) 3) Black mode : brightness of dot is less than 70% at white raster. (visible to eye) 4) 1 dot : defect dot is isolated, not attached to other defect dot. 5) N dots : N defect dots are consecutive. (N means the number of defects dots) 6) Density : number of defect dots inside 20mm O . 7) Those stains which can be wiped out easily are not defects. 8) Polarizer area inside of B-zone is not applied.
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2612-TX18D16VM1CAA-1
Page
12-3/3
10. PRECAUTION
Please pay attention to the followings when you use this TFT-LCD Module with Back-light unit. 10.1 Precaution to handling and mounting (1) You should consider the mouting structure so that uneven force (ex. twisted stress) is not applied to the module. (2) To improve the strength of module against the mechanical shock the space between the module and the case should be less than 1.0mm. (3)Protection material in front of LCD's screen surface is recommended to protect a polarizer, LCD-glass and metal bezel. Please be note that the protection material should not touch them directry. (4) Acetic acid type and chloline type materials for the cover case are not desiable because the former generate corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break by electro-chemical reaction. (5)Do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than HB pencil lead. And please do not rub by dustclothes with chemical treatment. Do not touch the surface of polarizer with bare hand or greasy close. (Some cosmetics are detrimental to the polarizer.) (6) When the surface becomes dusty,please wipe gently with absorbent cotton or other soft materials chamois soaked Normal-Hexane. Normal-Hexane is recommended for clearning the adhesives used to attach front /rear polarizers. Do not use acetone, toluen and alcohol because they cause chemical damage to the polarizer. (7) Wipe off saliva or water drops as soon as possible. Their long time contact with polarizer cuses deformations and color fading. (8)The module should never be opened or modified. It may cause not to operate properly. (9) Metallic bezel of a module should not be handled with bare hand or dirty gloves. Otherwise, color of a metallic frame may become dirty during its storage. It is recommended to use clean soft gloves and clean finger stalls when a module is handled at incoming inspection process and production (assembly) process. (10)When you adopt a metallic shield board on backside of TFT-LCD Module, it should not be too close to TFT-LCD Module. (11) Do not pull or do not fold the CCFL cable.
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2613-TX18D16VM1CAA-1
Page
13-1/4
10.2 Precaution to operation (1) You should adopt radiation structure to satisfy the temperature specification. (2) Optical response time, luminance and chromaticity depend on the temperature of a TFT-LCD module. (At lower temperature it becomes longer.) (3)Response time and saturation time of CCFL luminance become longer at lower temperature operation. (4) Sudden temperature change may cause dew on and/or in the a module. Dew males damage to a polarizer and/or electrical contacting portion. Dew causes fading of displayed quality. (5) Fixed patterns displayed on a module for a long time may cause after-image. It will be recovered soon. (6) Please connect the Back-light connector to the inverter circuit directly. The long cable between CCFL and the inverter may cause the brightness drop of CCFL and may cause the rise of starting lamp voltage(Vs). (8) The module should not be connected or removed while a main system works. (9) Inserting or pulling I/F connectors causes any truble when power supply and signal datas are on-state.I/F connectors should be inserted and pulled after power supply and signal datas are turned off. 10.3 Electrostatic discharge control (1) Since a module consists of a TFT cell and electronic circuits with CMOS-ICs, which are very weak to electrostatic discharge, persons who are handling a module should be grounded through adequate methods such as a list band. I/F connector pins should not be touched directly with bare hands. (2) Protection film for a polarizer on a module should be slowly peeled off so that the electrostatic charge can be minimized. 10.4 Precaution to strong light exposure A module should not be exposed under strong light. Otherwise, characteristics of a polarizer and color filter in a module may be degraded.
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2613-TX18D16VM1CAA-1
Page
13-2/4
10.5 Precaution to storage When TFT-LCD Modules are stored for a long time, following precautions should be taken care of: (1) Modules should be stored in a dark place. It is prohibited to apply sunlight or fluorescent light during storage. Modules should be stored at 0 to 35C at normal humidity (60%RH or less). (2) The surface of polarizers should not come in contact with any other object. It is recommended that modules should be stored in the Hitachi's shipping box. 10.6 Precaution to handle protective film (1)When the protective film is peeled off, static electricity is generated between the film and the polarizer. This film should be peeled off slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in such a condition, etc. (2)The protective film is attached to the polarizer with a small amount of glue. If some stress is applied to rub the protective film against the polarizer during the time you peel off the film, the glue is apt to remain more on the polarizer. So please carefully peel off the protective film without rubbing it against the polarizer. (3)When the module with protective film attached is stored for long time, sometimes there remains a very small amount of glue, still on the polarizer after the protective film is peeled off. Please refrain from storing the module at the high temperature and high humidity for glue is apt to remain in these condition. (4)The glue may be taken for the modules failure, but you can remove the glue easily. When the glue remains on the polarizer surface or its vestige is recognized, please wipe them off with absorbent cotton waste or other soft material like chamois soaked with Normal-Hexane. 10.7 Safety (1) If module is broken, be careful to handle not to injure. (TFT-LCD and Lamp are made of glass.) Please wash hands sufficiently when you touch the liquid crystal coming out from broken LCDs. (2)As Back-light unit has high voltage circuit internal, do not open the case and do not insert foreign materials in the case. (3)The CCFL inverter should be designed to include the function of output shutdown in case the output overcurrent happen due to any backlight trouble. The shutdown function should be assured to work in abnormal condition at the actual systems.
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2613-TX18D16VM1CAA-1
Page
13-3/4
10.8 Environmental protection (1) This TFT-LCD Module include Cold Cathode Fluorescent Lamp (CCFL). CCFL contains a small amount of mercury. Please follow local ordinance or regulations for disposal. (2) Flexible circuits board, printed circuits board and solder used in a module contain small amount of lead (Pb). Please follow local ordinance or regulations for its disposal.
10.9 Use restrictions and limitations (1) This product is not authorized for use in life support devices or systems, military applications or other applications which pose a significant risk of personal injury. (2) In no event shall Hitachi, Ltd., be liable for any incidental, indirect or consequential damages in connection with the installation or use of this product, even if informed of the possibility thereof in advance. These limitations apply to all causes of action in the aggregate, including without limitation breach of contact, breach of warranty, negligence, strict liability, misrepresentation and other torts.
10.10 Others (1) Electrical components which may not affect electrical performance are subjective to change without notice because of their availability.
Hitachi Displays, Ltd.
Date
Sep.8,2003
Sheet No.
3284PS 2613-TX18D16VM1CAA-1
Page
13-4/4

▲Up To Search▲

Price & Availability of TX18D16VM1CAA

	To Download TX18D16VM1CAA Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .