View APD0505-000_4111579.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
APD Series: Silicon PIN Diode Chips
Features
Established Skyworks PIN diode process For switch and attenuator applications G Low capacitance designs to 0.05 pF G Voltage ratings to 100 V G Chip size smaller than 15 mils square G Available lead (Pb)-free, RoHS-compliant, and Green
G G
Description
Skyworks APD Series of silicon PIN diode chips is designed for use as switch and attenuator devices in high-performance hybrid microwave integrated circuits. These PIN diode designs are useful over a wide range of frequencies from below 100 MHz to beyond 30 GHz. These devices utilize Skyworks well-established silicon technology resulting in high resistivity and tightly controlled I region width PIN diodes. APD0505-00 through APD0810-000 are primarily designed for fast speed through moderate speed switch applications. They have low resistance and capacitance at zero bias and reverse bias. The thick I region APD2220-000 is primarily designed for low-distortion attenuator applications.
Absolute Maximum Ratings
Characteristic Power dissipation Operating temperature Storage temperature Value Pdiss = 175-Tamb W -65 C to +175 C -65 C to +200 C
Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty.
NEW
Skyworks Green products are lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant, conform to the EIA/EICTA/JEITA Joint Industry Guide (JIG) Level A guidelines, and are free from antimony trioxide and brominated flame retardants.
CAUTION: Although this device is designed to be as robust as possible, ESD (Electrostatic Discharge) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times.
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com
200075 Rev. F * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * July 26, 2007
1
DATA SHEET * APD SERIES
Electrical Specifications at 25 C
Part Number Capacitance VR = 50 V, 1 MHz (pF) Max. Switching Applications APD0505-000 APD0510-000 APD0520-000 APD0805-000 APD0810-000 APD1510-000 APD1520-000 Attenuator Applications APD2220-000 0.2 0.2 4 700 100 50 80 7.5 149-815 0.05 0.1 0.2 0.05 0.1 0.1 0.2 0.1 0.2 0.25 0.1 0.15 0.2 0.25 2 1.5 1 2 1.5 2 1.2 20 40 50 100 160 300 900 50 50 50 100 100 200 100 5 5 5 8 8 15 15 100 80 80 80 60 60 30 1.5 2.5 3.5 2 3 3 4 150-806 150-801 150-801 150-801 150-801 150-813 150-802 Capacitance VR = 0 V, 1 MHz (pF) Typ. RS I = 10 mA, 500 MHz () Max. TL I = 10 mA (ns) Typ. Voltage Rating IR = 10 A (V) Min. I Region (m) Nom. Thermal Resistance (C/W) Max. Contact Diameter (Mils) Nom. Outline Drawing
Typical Performance Data
1000 1000 APD2220-000 100 100 APD0805-000 10 APD0505-000
Resistance ()
Resistance ()
APD0810-000 10
1
APD0510-000
1 APD1510-000
0.1 0.01
0.1
1
10
100
0.1 0.01
0.1
1
10
100
Forward Current (mA)
Forward Current (mA)
Resistance vs. Forward Current @ 1 GHz
Resistance vs. Forward Current @ 1 GHz
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2
July 26, 2007 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200075 Rev. F
DATA SHEET * APD SERIES
Outline Drawings
149-815 150 Series
Anode Metallized Gold Dot 0.014 0.001 (0.350 0.025 mm) 0.010 (0.251 mm) Min. 0.014 (0.356 mm) Max. Sq.
Anode Metallized Gold Dot 0.002 (0.051 mm) Min. Dia.
0.014 0.001 (0.350 0.025 mm) 0.004 (0.127 mm) Min. 0.006 (0.152 mm) Max. 0.004 (0.127 mm) Min. 0.006 (0.152 mm) Max.
150-801: 0.002 (0.051 mm) Min. 150-806: 0.0011 (0.028 mm) Min.
Silicon Cathode Metallized Back Contact: Gold
Cathode Metallized Back Contact: Gold
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com
200075 Rev. F * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * July 26, 2007
3
DATA SHEET * APD SERIES
Copyright (c) 2002, 2003, 2004, 2005, 2006, 2007, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and "Breakthrough Simplicity" are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference.
Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4
July 26, 2007 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200075 Rev. F

▲Up To Search▲

Price & Availability of APD0505-000

	To Download APD0505-000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .