 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AL875 High Speed Triple 8-bit ADC Applications - - - - LCD/PDP Monitors LCD Projectors Other Flat Panel Displays High-end Video/Graphics Processing * * * * * * * * * * * * * High speed 8-bit ADC up to 110MHz encode rate Support display resolution up to 1280x1024 at 60Hz Low power dissipation (0.8W typical at 3.3V, 110MHz) 0.6~2.0V p-p analog input range 10k~1MHz HSYNC locking range Full programmability via I2C interface Support automatic screen positioning Support automatic clock phase adjustment TTL compatible digital inputs and outputs High impedance tri-state output Power-down mode Single 3.3 volt power with 5 volt tolerant I/O 100-pin 14x20 mm PQFP package Description The AL875 is a high-speed triple 8-bit monolithic analog-to-digital converter (ADC) designed for digitizing RGB graphics/video signal or other applications. Its 110 MHz conversion rate can support display resolution up to 1280x1024 at 60Hz. ADDR1/2 SDA SCL CKEXT IIC Interface & Control Logic HSYNC Digital Logic Circuits VSYNC CK REF CP RIN VRT VN VRB T/H ADC/R Output Logic ROUT<7:0> GIN VRT VN VRB T/H ADC/G Output Logic GOUT<7:0> BIN VRT VN VRB T/H ADC/B Output Logic BOUT<7:0> /OE AL875-01a functional block diagram.vsd AVERLOGIC TECHNOLOGIES, INC. E-mail: sales_usa@averlogic.com AVERLOGIC TECHNOLOGIES, CORP. E-mail: sales@averlogic.com.tw URL: www.averlogic.com URL: www.averlogic.com.tw February 25, 2003 The AL875 is a high-speed triple 8-bit monolithic analog-to-digital converter (ADC) designed for digitizing RGB graphics/video signal or other applications. Its 110 MHz conversion rate can support display resolution of up to 1280x1024 at 60Hz refresh rate. The AL875 accepts 0.6~2.0V analog input range without using pre-amplifiers which may reduce the overall S/N ratio. Digitized data is piped at the full clock rate to the 24-bit output port. The AL875 uses 3.3V power with 5V tolerant I/O and low power dissipation. The sampling clock is provided by an external clock source, usually a PLL, which multiplies the frequency of the input reference clock (usually a HSYNC signal) to generate the sampling clock. The AL875 provides a programmable PLL divider up to 4096. In addition, the input active horizontal and vertical starting and ending positions can be detected to ensure that the whole picture fits into the displayable region of the screen. Through an I2C interface, the AL875 is fully programmable to support various graphic resolutions. Analog graphic/video signals such as RGB, YCbCr and YPbPr can be digitized by the AL875. The digitized data can then be processed by the AL250/251 line doubler, AL300 LCD controller, or other proprietary designs for various applications. Ordering Information Part number AL875 Package 100-pin QFP Power supply +3.3 volt Maximum Operating Frequency 110MHz For more information about the AL875 or other AverLogic products, please contact your local authorized representatives, visit our website, or contact us directly. DISTRIBUTED BY: AVERLOGIC TECHNOLOGIES, INC. E-mail: sales_usa@averlogic.com AVERLOGIC TECHNOLOGIES, CORP. E-mail: sales@averlogic.com.tw URL: www.averlogic.com URL: www.averlogic.com.tw February 25, 2003 |
Price & Availability of AL875
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |