|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
STB20NF06L - STF20NF06L STP20NF06L N-channel 60V - 0.06 - 20A - D2PAK/TO-220/TO-220FP STripFETTM II Power MOSFET General features Type STB20NF06L STF20NF06L STP20NF06L VDSS 60V 60V 60V RDS(on) <0.07 <0.07 <0.07 ID 20A 20A (1) 20A 1 3 2 1 3 2 TO-220FP TO-220 1. Refer to SOA for the max allowable current value on FP-type due to Rth value Avalanche rugged technology 100% avalanche tested 175C operating temperature High dv/dt capability application oriented characterization 1 3 DPAK Description This Power MOSFET is the latest development of STMicroelectronics unique "single feature size"TM strip-based process. The resulting transistor shows extremely high packing density for low onresistance, rugged avalanche characteristics and less critical alignment steps therefore a remarkable manufacturing reproducibility. Internal schematic diagram Applications Switching application Order codes Part number STB20NF06LT4 STF20NF06L STP20NF06L Marking B20NF06L F20NF06L P20NF06L Package DPAK TO-220FP TO-220 Packaging Tape & reel Tube Tube July 2006 Rev 2 1/16 www.st.com 16 Contents STB20NF06L - STF20NF06L - STP20NF06L Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 4 5 6 Test circuit ................................................ 9 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packing mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2/16 STB20NF06L - STF20NF06L - STP20NF06L Electrical ratings 1 Electrical ratings Table 1. Symbol VDS VGS ID ID IDM (2) Absolute maximum ratings Value Parameter TO-220/DPAK Drain-source voltage (VGS = 0) Gate- source voltage Drain current (continuous) at TC = 25C Drain current (continuous) at TC = 100C Drain current (pulsed) Total dissipation at TC = 25C Derating Factor 20 14 80 60 0.4 9 120 -55 to 175 Max. operating junction temperature 60 18 20 (1) 14 80 (1) (1) Unit TO-220FP V V A A A W W/C V/ns mJ C Ptot (3) (4) 28 0.18 dv/dt EAS Peak diode recovery voltage slope Single pulse avalanche energy Storage temperature Tstg Tj 1. Refer to SOA for the max allowable current value on FP-type due to Rth value 2. Pulse width limited by safe operating area. 3. ISD 20A, di/dt 200A/s, VDD V(BR)DSS, Tj TJMAX 4. Starting Tj = 25 C, ID = 10A, VDD = 30V Table 2. Symbol Thermal data Parameter TO-220/DPAK 2.5 62.5 300 TO-220FP 5.35 Unit C/W C/W C/W Rthj-case Thermal resistance junction-case max Rthj-amb Tl Thermal resistance junction-ambient max Maximum lead temperature for soldering purpose (for 10sec. 1.6mm from case) 3/16 Electrical characteristics STB20NF06L - STF20NF06L - STP20NF06L 2 Electrical characteristics (TCASE=25C unless otherwise specified) Table 3. Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on) On/off states Parameter Drain-source breakdown voltage Zero gate voltage drain current (VGS = 0) Gate-body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 250A, VGS =0 VDS = Max rating VDS = Max rating,@125C VGS = 18V VDS = VGS, ID = 250A VGS = 10V, ID = 10A VGS = 5V, ID = 10A 2 3 0.060 0.075 Min. 60 1 10 100 4 0.070 0.085 Typ. Max. Unit V A A nA V Table 4. Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd Dynamic Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-source charge Gate-drain charge Test conditions VDS= 15V, ID = 8A Min. Typ. 10 400 100 40 7.5 2.5 4.2 Max. Unit S pF pF pF nC nC nC VDS = 25V, f = 1MHz, VGS = 0 VDD = 30V, ID = 20A, VGS = 10V (see Figure 16) 1. Pulsed: Pulse duration = 300 s, duty cycle 1.5 %. 4/16 STB20NF06L - STF20NF06L - STP20NF06L Electrical characteristics Table 5. Symbol td(on) tr td(off) tf Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions VDD = 30V, ID = 10A RG = 4.7 VGS = 10V (see Figure 15) Min. Typ. 12 30 20 6 Max. Unit ns ns ns ns Table 6. Symbol ISD ISDM (1) VSD (2) trr Qrr IRRM Source drain diode Parameter Source-drain current Source-drain current (pulsed) Forward on voltage ISD = 20A, VGS = 0 50 65 3 Test conditions Min. Typ. Max. 20 80 1.5 Unit A A V ns nC A Reverse recovery time ISD = 20A, di/dt = 100A/s, Reverse recovery charge VDD = 20V, Tj = 150C Reverse recovery current (see Figure 17) 1. Pulse width limited by safe operating area. 2. Pulsed: Pulse duration = 300 s, duty cycle 1.5 % 5/16 Electrical characteristics STB20NF06L - STF20NF06L - STP20NF06L 2.1 Figure 1. Electrical characteristics (curves) Safe operating area for TO-220/ DPAK Figure 2. Thermal impedance for TO-220/ DPAK Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Output characterisics Figure 6. Transfer characteristics 6/16 STB20NF06L - STF20NF06L - STP20NF06L Figure 7. Transconductance Figure 8. Electrical characteristics Static drain-source on resistance Figure 9. Gate charge vs gate-source voltage Figure 10. Capacitance variations Figure 11. Normalized gate threshold voltage vs temperature Figure 12. Normalized on resistance vs temperature 7/16 Electrical characteristics Figure 13. Source-drain diode forward characteristics STB20NF06L - STF20NF06L - STP20NF06L Figure 14. Normalized breakdown voltage temperature 8/16 STB20NF06L - STF20NF06L - STP20NF06L Test circuit 3 Test circuit Figure 16. Gate charge test circuit Figure 15. Switching times test circuit for resistive load Figure 17. Test circuit for inductive load Figure 18. Unclamped Inductive load test switching and diode recovery times circuit Figure 19. Unclamped inductive waveform Figure 20. Switching time waveform 9/16 Package mechanical data STB20NF06L - STF20NF06L - STP20NF06L 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at : www.st.com 10/16 STB20NF06L - STF20NF06L - STP20NF06L Package mechanical data TO-220 MECHANICAL DATA DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154 oP Q 11/16 Package mechanical data STB20NF06L - STF20NF06L - STP20NF06L TO-220FP MECHANICAL DATA mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O A B L3 L6 L7 F1 F D G1 H F2 L2 L5 E 123 L4 12/16 G STB20NF06L - STF20NF06L - STP20NF06L Package mechanical data D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 4 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 TYP MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch 3 1 13/16 Packing mechanical data STB20NF06L - STF20NF06L - STP20NF06L 5 Packing mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956 BASE QTY 1000 * on sales type 14/16 STB20NF06L - STF20NF06L - STP20NF06L Revision history 6 Revision history Table 7. Date 09-Dec-2004 27-Jul-2006 Revision history Revision 1 2 First release New template, inserted DPAK Changes 15/16 STB20NF06L - STF20NF06L - STP20NF06L Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16 |
Price & Availability of STF20NF06L |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |