|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
BUS IC DC/DC CONVERTER MOTOR DRIVER IC RIPPLE COUNTER DRIVER IC I/O IC SENSOR IC SENSOR INTERFACE IC HALIOS(R) optical switch y HALIOS(R) Micromouse Hall sensor interface 8 *, par. out Hall sensor interface 6 *, ser. out PIR controller Hall sensor interface 4 *, par. out y HALIOS(R) Micromouse FEATURES y y y y y y y y y y y y Supply voltage range 3.0V to 5.5V Programable detection algorithms for many different applications 8-Bit microcontroller with 4MHz clockrate 4kByte EEPROM 192 Byte RAM Optical working principle without mechanics Operational up to 100klux ambient light Low standby current Parameter adjustment and functional data read back via SPI Configureable inputs and outputs - 40C to + 85C operating temperature LQFP 48 package The infrared emitting diodes (IRED, signal diodes) and the photodiode are placed on a PCB in a required formation. The ability to detect the motion of an object on the surface depends on changes in the optical path of the reflected signal, changing the relative APPLICATION y y y Navigation key for mobile phones, laptop computers and handheld devices Switches, rotation-sliders, proximity-sensors Compact 2-D input device With 4k of EEPROM the customer has enough memory space for even complex applications and an easy to use posibility to protect his know how even in a ASSP. For automotive, industrial and pc applications a version 909.03 with integrated IR diodes and photodiode is available in an ASIC package. plus coming soon DESCRIPTION The IC is an optical sensor which provides a non-mechanical detection of movements. The EEPROM allows a free configuration of the sensor-structure and the detection algorithms. The sensor measures the optical reflections of an object on a cover above the sensor using a system so called HALIOS(R) (High Ambient Light Independent Optical System). HALIOS(R) is high efficient suppressing ambient light and also has an inherent self calibration to eliminate disturbances caused by housing reflections such as scratches. PINNING Pin 1 3 4 5 6 7 10 11 12 13 14 15 18 19 22 23 24 25 28 29 30 31 32 E909.02|03 PACKAGE DIG_OUT2 Name TEST _ IN TIN AGND AVDD ILED1 LEDGND1 DGND DVDD CS SCK MOSI MISO ILED2 LEDGND2 VDDI SDA SCL INT TEST _ OUT VPP ILED3 LEDGND3 DIG _ OUT2 RESET DIG _ IO5 DIG _ OUT1 DIG _ IO1 ILED4 LEDGND4 ILED5 TEST Description DIG_OUT1 DIG_IO6 DIG_IO5 RESET VPP Analog ground Analog supply Driver LED 1 Analog ground driver LED 1 Digital ground Digital supply SPI chip select: slave mode: input, master mode: output 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 DIG_IO1 37 DIG_IO2 38 DIG_IO3 39 DIG_IO4 40 NC 41 ILED4 42 LEDGND4 43 ILED5 44 NC 45 NC 46 NC 47 TEST 48 1 2 3 4 5 6 7 8 9 10 11 12 INT SCL SDA VDDI NC NC LEDGND2 ILED2 NC NC MISO MOSI SCK 19 18 17 16 15 14 13 NC E909.02 SPI clock: slave mode: input, master mode: output; NC NC AVDD ILED1 TIN NC TEST_IN DVDD AGND LEDGND1 light intensity of LED pairs. SPI data out: slave mode: MISO, master mode: MOSI Driver LED2 Analog ground driver LED2 Digital supply for I2C - interface I C data in/out, open collector 2 AVAILABILITY Samples available I2C clock input I2C interrupt output Test output Supply voltage for E2 write procedures Driver LED3 Analog ground driver LED3 Programable digital output 2 Reset input Programable digital input/output 5-6 Programable digital output 1 Programable digital input/output 1-4 Driver LED4 Analog ground driver LED4 Driver LED5 Test mode enable Not connected Series DGND Q4/2005 (E909.02) Q2/2006 (E909.03) BLOCK DIAGRAM DVDD AVDD DVDD VDD 33 34-35 36 37-40 42 43 44 48 CS TIN Filter Demod DVDD SCK SPI MOSI MISO LED1 control LED2 LED3 LED4 LEDC C C *Available for automotive, industrial or pc applications. MUX DVDD RAM ROM DAC 2,8-9,16-17,20-21,26-27,41,45-47 LEDGND AGND DGND Note ELMOS Semiconductor AG (below ELMOS) reserves the right to make changes to the product contained in this publication without notice. ELMOS assumes no responsibility for the use of any circuits described herein, conveys no licence under any patent or other right, and makes no representation that the circuits are free of patent infringement. While the information in this publication has been checked, no responsibility, however, is assumed for inaccuracies. ELMOS does not recommend the use of any of its products in life support applications where the failure or malfunction of the product can reasonably be expected to cause failure of a life-support system or to significantly affect its safety or effectiveness. Products are not authorized for use in such applications. Copyright (c) 2005 ELMOS Reproduction, in part or whole, without the prior written consent of ELMOS, is prohibited. www.elmos.de | sales@elmos.de 90 CS SPI data in: slave mode: MOSI, master mode: MISO NC Transimpedance amplifier input ILED3 Analog test input TEST_OUT LEDGND3 E909.03* elmos product catalog june 2005 91 |
Price & Availability of E90902 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |