|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
STB19NF20 - STF19NF20 STP19NF20 N-channel 200V - 0.15 - 15A - TO-220 - D2PAK - TO-220FP MESH OVERLAYTM Power MOSFET General features Type STB19NF20 STF19NF20 STP19NF20 VDSS 200V 200V 200V RDS(on) <0.16 <0.16 <0.16 ID 15A 15A 15A pw 90W 25W 90W TO-220 3 1 2 3 1 DPAK Extremely high dv/dt capability Gate charge minimized Very low intrinsic capacitances 1 3 2 Description This Power MOSFET is designed using the company's consolidated strip layout-based MESH OVERLAYTM process. This technology matches and improves the performances compared with standard parts from various sources. TO-220FP Internal schematic diagram Applications Switching application Order codes Part number STB19NF20 STF19NF20 STP19NF20 Marking 19NF20 19NF20 19NF20 Package DPAK TO-220FP TO-220 Packaging Tape & reel Tube Tube February 2007 Rev 4 1/16 www.st.com 16 Contents STB19NF20 - STF9NF20 - STP19NF20 Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 4 5 6 Test circuit ................................................ 9 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 2/16 STB19NF20 - STF9NF20 - STP19NF20 Electrical ratings 1 Electrical ratings Table 1. Symbol VDS VGS ID ID IDM(2) PTOT Absolute maximum ratings Value Parameter TO-220 / DPAK Drain-source voltage (VGS = 0) Gate-source voltage Drain current (continuous) at TC = 25C Drain current (continuous) at TC=100C Drain current (pulsed) Total dissipation at TC = 25C Derating factor 15 9.45 60 90 0.72 -15 -55 to 150 200 20 15(1) 9.45(1) 60 (1) 25 0.2 2500 TO-220FP V V A A A W W/C V V/ns C Unit VISO dv/dt(3) TJ Tstg Insulation withstand voltage (RMS) from all three leads to external heat sink (t=1s;TC=25C) Peak diode recovery voltage slope Operating junction temperature Storage temperature 1. Limited by package 2. Pulse width limited by safe operating area 3. ISD 15A, di/dt 300A/s, VDD = 80%V(BR)DSS Table 2. Symbol Rthj-case Rthj-pcb Rthj-a Tl Thermal data Value Parameter TO-220 Thermal resistance junction-case max Thermal resistance junction-pcb max Thermal resistance junction-ambient max Maximum lead temperature for soldering purpose -DPAK TO-220FP 5 50 62.5 300 -C/W C C/W 1.39 Unit Table 3. Symbol IAR EAS Avalanche data Parameter Avalanche current, repetitive or not-repetitive (pulse width limited by Tj Max) Single pulse avalanche energy (starting Tj=25C, Id=Iar, Vdd=50V) Value 15 110 Unit A mJ 3/16 Electrical characteristics STB19NF20 - STF9NF20 - STP19NF20 2 Electrical characteristics (TCASE=25C unless otherwise specified) Table 4. Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on) On/off states Parameter Drain-source breakdown voltage Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 1mA, VGS= 0 VDS = Max rating, VDS = Max rating @125C VGS = 20V VDS= VGS, ID = 250A VGS= 10V, ID= 7.5A 2 3 0.15 Min. 200 1 10 100 Typ. Max. Unit V A A nA V 4 0.16 Table 5. Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd Dynamic Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-source charge Gate-drain charge Test conditions VDS =8V, ID = 7.5A VDS =25V, f=1 MHz, VGS=0 VDD=160V, ID = 15A VGS =10V (see Figure 16) Min. Typ. 12 800 165 26 24 4.4 11.6 Max. Unit S pF pF pF nC nC nC 1. Pulsed: pulse duration=300s, duty cycle 1.5% 4/16 STB19NF20 - STF9NF20 - STP19NF20 Electrical characteristics Table 6. Symbol td(on) tr td(off) tf Switching times Parameter Turn-on delay time Rise time Test conditions VDD=100 V, ID= 7.5A, RG=4.7, VGS=10V (see Figure 15) VDD = 100 V, ID = 7.5A, RG = 4.7, VGS = 10V (see Figure 15) Min. Typ. 11.5 22 Max. Unit ns ns Turn-off delay time Fall time 19 11 ns ns Table 7. Symbol ISD ISDM(1) VSD(2) trr Qrr IRRM trr Qrr IRRM Source drain diode Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current ISD=15A, VGS=0 ISD=15A, VDD=50V di/dt = 100A/s, (see Figure 20) ISD=15A, VDD=50V di/dt = 100A/s, Tj=150C (see Figure 20) 125 0.55 8.8 148 0.73 9.9 Test conditions Min Typ. Max 15 60 1.6 Unit A A V ns C A ns C A 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration = 300s, duty cycle 1.5% 5/16 Electrical characteristics STB19NF20 - STF9NF20 - STP19NF20 2.1 Figure 1. Electrical characteristics (curves) Safe operating area for TO-220 / DPAK Figure 2. Thermal impedance for TO-220 / DPAK Figure 3. Safe operating area for TO-220FP Figure 4. Thermal impedance for TO-220FP Figure 5. Output characteristics Figure 6. Transfer characteristics 6/16 STB19NF20 - STF9NF20 - STP19NF20 Figure 7. Static drain-source on resistance Figure 8. Electrical characteristics Normalized BVDSS vs temperature Figure 9. Gate charge vs gate-source voltage Figure 10. Capacitance variations Figure 11. Normalized gate threshold voltage vs temperature Figure 12. Normalized on resistance vs temperature 7/16 Electrical characteristics Figure 13. Source-drain forward characteristics STB19NF20 - STF9NF20 - STP19NF20 Figure 14. Maximum avalanche energy vs temperature 8/16 STB19NF20 - STF9NF20 - STP19NF20 Test circuit 3 Test circuit Figure 16. Gate charge test circuit Figure 15. Switching times test circuit for resistive load Figure 17. Test circuit for inductive load Figure 18. Unclamped Inductive load test switching and diode recovery times circuit Figure 19. Unclamped inductive waveform Figure 20. Switching time waveform 9/16 Package mechanical data STB19NF20 - STF9NF20 - STP19NF20 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 10/16 STB19NF20 - STF9NF20 - STP19NF20 Package mechanical data TO-220 MECHANICAL DATA DIM. A b b1 c D E e e1 F H1 J1 L L1 L20 L30 mm. MIN. 4.40 0.61 1.15 0.49 15.25 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 TYP MAX. 4.60 0.88 1.70 0.70 15.75 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 MIN. 0.173 0.024 0.045 0.019 0.60 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 0.645 1.137 0.151 0.116 inch TYP. MAX. 0.181 0.034 0.066 0.027 0.620 0.409 0.106 0.202 0.052 0.256 0.107 0.551 0.154 oP Q 11/16 Package mechanical data STB19NF20 - STF9NF20 - STP19NF20 TO-220FP MECHANICAL DATA mm. MIN. 4.4 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.4 10 16 28.6 9.8 2.9 15.9 9 3 30.6 10.6 3.6 16.4 9.3 3.2 1.126 .0385 0.114 0.626 0.354 0.118 TYP MAX. 4.6 2.7 2.75 0.7 1 1.7 1.7 5.2 2.7 10.4 MIN. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch TYP. MAX. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 DIM. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 O A B L3 L6 L7 F1 F D G1 H F2 L2 L5 E 123 L4 12/16 G STB19NF20 - STF9NF20 - STP19NF20 Package mechanical data D2PAK MECHANICAL DATA TO-247 MECHANICAL DATA mm. DIM. MIN. A A1 A2 B B2 C C2 D D1 E E1 G L L2 L3 M R V2 0 4.88 15 1.27 1.4 2.4 0.4 4 10 8.5 5.28 15.85 1.4 1.75 3.2 0.192 0.590 0.050 0.055 0.094 0.015 4.4 2.49 0.03 0.7 1.14 0.45 1.23 8.95 8 10.4 0.393 0.334 0.208 0.625 0.055 0.068 0.126 TYP MAX. 4.6 2.69 0.23 0.93 1.7 0.6 1.36 9.35 MIN. 0.173 0.098 0.001 0.027 0.044 0.017 0.048 0.352 0.315 TYP. MAX. 0.181 0.106 0.009 0.036 0.067 0.023 0.053 0.368 inch 3 1 13/16 Packaging mechanical data STB19NF20 - STF9NF20 - STP19NF20 5 Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956 BASE QTY 1000 * on sales type 14/16 STB19NF20 - STF9NF20 - STP19NF20 Revision history 6 Revision history Table 8. Date 13-Oct-2006 17-Nov-2006 02-Feb-2007 16-Feb-2007 Revision history Revision 1 2 3 4 First release Part number has been modified Preliminary version TO-220FP package has been added Changes 15/16 STB19NF20 - STF9NF20 - STP19NF20 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2007 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16 |
Price & Availability of STP19NF20 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |