View FXLH1T45L6X_4132536.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

FXLH1T45 Low Voltage 1-Bit Bi-directional Level Translator with Configurable Voltage Supplies and Bushold Data Inputs
April 2007
FXLH1T45 Low Voltage 1-Bit Bi-directional Level Translator with Configurable Voltage Supplies and Bushold Data Inputs
Features
Bi-directional interface between any 2 levels from 1.1V
tm
General Description
The FXLH1T45 is a single bit configurable dual-voltage supply translator designed for both uni-directional and bi-directional voltage translation between two logic levels. The device allows translation between voltages as high as 3.6V to as low as 1.1V. The A port tracks the VCCA level, and the B port tracks the VCCB level. This allows for bi-directional voltage translation over a variety of voltage levels: 1.2V, 1.5V, 1.8V, 2.5V, and 3.3V. The device remains in 3-STATE until both VCCs reach active levels allowing either VCC to be powered-up first. Internal power down control circuits place the device in 3-STATE if either VCC is removed. The Transmit/Receive (T/R) input determines the direction of data flow through the device. The FXLH1T45 is designed so that the control pin (T/R) is supplied by VCCA.
to 3.6V
Fully configurable: Inputs track VCC level Non-preferential power-up sequencing; either VCC
may be powered-up first Outputs remain in 3-STATE until active VCC level is reached Outputs switch to 3-STATE if either VCC is at GND Power off protection Bushold on data inputs eliminates the need for external pull-up/pull-down resistors Control input (T/R) levels are referenced to VCCA voltage Packaged in the MicroPak 6 (1.0mm x 1.45mm) ESD protections exceeds: - 4kV HBM ESD (per JESD22-A114 & Mil Std 883e 3015.7) - 8kV HBM I/O to GND ESD (per JESD22-A114 & Mil Std 883e 3015.7) - 1kV CDM ESD (per ESD STM 5.3) - 200V MM ESD (per JESD22-A115 & ESD STM5.2)
Ordering Information
Order Number
FXLH1T45L6X
Package Number
MAC06A
Pb-Free
Yes
Package Description
6-Lead MicroPak, 1.0mm Wide
Supplied As
5k Units on Tape and Reel
MicroPakTM is a trademark of Fairchild Semiconductor Corporation.
(c)2006 Fairchild Semiconductor Corporation FXLH1T45 Rev. 1.0.4 www.fairchildsemi.com
FXLH1T45 Low Voltage 1-Bit Bi-directional Level Translator with Configurable Voltage Supplies and Bushold Data Inputs
Functional Diagram
VCCA A B T/R VCCB
Function Table
Inputs (T/R)
L H H = HIGH Logic Level L = LOW Logic Level
Outputs
Bus B Data to Bus A Bus A Data to Bus B
Power-Up/Power-Down Sequencing Connection Diagram
VCCA GND A
1 6
VCCB T/R B
FXL translators offer an advantage in that either VCC may be powered up first. This benefit derives from the chip design. When either VCC is at 0V, outputs are in a HIGH-Impedance state. To ensure that bus contention, excessive currents, or oscillations do not occur, a proper power-up sequence is recommended. The recommended power-up sequence is the following: 1. Apply power to either VCC .
2
5
3
4
(Top Through View)
Pin Assignment
Pin Number
1 2 3 4 5 6
2. Apply power to the T/R input (Logic HIGH for A-to-B operation; Logic LOW for B-to-A operation) and to the respective data inputs (A Port or B Port). This may occur at the same time as Step 1. 3. Apply power to other VCC . The recommended power-down sequence is the following: 1. Remove power from either VCC . 2. Remove power from other VCC .
Terminal Name
VCCA GND A B T/R VCCB
Pin Descriptions
Pin Names
T/R A B VCCA VCCB
Description
Transmit/Receive Input Side A Input or Output Side B Input or Output Side A Power Supply Side B Power Supply
(c)2006 Fairchild Semiconductor Corporation FXLH1T45 Rev. 1.0.4
www.fairchildsemi.com 2
FXLH1T45 Low Voltage 1-Bit Bi-directional Level Translator with Configurable Voltage Supplies and Bushold Data Inputs
Absolute Maximum Ratings
Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only.
Symbol
VCCA, VCCB VI Supply Voltage DC Input Voltage I/O Port A I/O Port B Control Input (T/R) Output Voltage(1) Outputs 3-STATE Outputs Active (An) Outputs Active (Bn)
Parameter
Rating
-0.5V to +4.6V -0.5V to +4.6V -0.5V to +4.6V -0.5V to +4.6V -0.5V to +4.6V -0.5V to VCCA + 0.5V -0.5V to VCCB + 0.5V -50mA -50mA +50mA -50mA / +50mA 100mA -65C to +150C
VO
IIK IOK
DC Input Diode Current @ VI < 0V DC Output Diode Current @ VO < 0V VO > VCC DC Output Source/Sink Current DC VCC or Ground Current per Supply Pin Storage Temperature Range
IOH / IOL ICC TSTG
Recommended Operating Conditions(2)
The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings.
Symbol
VCCA or VCCB Power Supply Operating Input Voltage Port A Port B Control Input (T/R)
Parameter
Rating
1.1V to 3.6V 0.0V to 3.6V 0.0V to 3.6V 0.0V to VCCA 24mA 18mA 6mA 2mA 0.5mA -40C to +85C 10ns/V
Output Current in IOH/IOL with VCC @ 3.0V to 3.6V 2.3V to 2.7V 1.65V to 1.95V 1.4V to 1.65V 1.1V to 1.4V TA t / V Free Air Operating Temperature Maximum Input Edge Rate VCCA/B = 1.1V to 3.6V
Notes: 1. IO Absolute Maximum Rating must be observed. 2. All unused inputs and I/O pins must be held at VCCI or GND.
(c)2006 Fairchild Semiconductor Corporation FXLH1T45 Rev. 1.0.4
www.fairchildsemi.com 3
FXLH1T45 Low Voltage 1-Bit Bi-directional Level Translator with Configurable Voltage Supplies and Bushold Data Inputs
DC Electrical Characteristics
Symbol
VIH
Parameter
High Level Input Voltage(3)
Conditions
Data Inputs An, Bn
VCCI (V)
2.7-3.6 2.3-2.7 1.65-2.3 1.4-1.65 1.1-1.4
VCCO (V)
1.1-3.6
Min.
2.0 1.6 0.65 x VCCI 0.65 x VCCI 0.9 x VCCI
Typ.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Max.
- - - - - - - - - - 0.8 0.7 0.35 x VCCI 0.35 x VCCI 0.1 x VCCI 0.8 0.7 0.35 x VCCA 0.35 x VCCA 0.1 x VCCA - - - - - - - - - - 0.2 0.4 0.4 0.55 0.4 0.6 0.3 0.35 0.3 x VCC0 1.0
Units
V
Control Pin T/R (Referenced to VCCA)
2.7-3.6 2.3-2.7 1.65-2.3 1.4-1.65 1.1-1.4
1.1-3.6
2.0 1.6 0.65 x VCCA 0.65 x VCCA 0.9 x VCCA
VIL
Low Level Input Voltage(3)
Data Inputs An, Bn
2.7-3.6 2.3-2.7 1.65-2.3 1.4-1.65 1.1-1.4
1.1-3.6
- - - - -
V
Control Pin T/R (Referenced to VCCA)
2.7-3.6 2.3-2.7 1.65-2.3 1.4-1.65 1.1-1.4
1.1-3.6
- - - - -
VOH
High Level Output Voltage(4)
IOH = -100A IOH = -12mA IOH = -18mA IOH = -24mA IOH = -6mA IOH = -12mA IOH = -18mA IOH = -6mA IOH = -2mA IOH = -0.5mA
1.1-3.6 2.7 3.0 3.0 2.3 2.3 2.3 1.65 1.4 1.1 1.1-3.6 2.7 3.0 3.0 2.3 2.3 1.65 1.4 1.1 1.1-3.6
1.1-3.6 2.7 3.0 3.0 2.3 2.3 2.3 1.65 1.4 1.1 1.1-3.6 2.7 3.0 3.0 2.3 2.3 1.65 1.4 1.1 3.6
VCC0-0.2 2.2 2.4 2.2 2.0 1.8 1.7 1.25 1.05 0.75 x VCC0 - - - - - - - - - -
V
VOL
Low Level Output Voltage(4)
IOL = 100A IOL = 12mA IOL = 18mA IOL = 24mA IOL =12mA IOL = 18mA IOL = 6mA IOL = 2mA IOL = 0.5mA
V
II
Input Leakage Current Control Pins
VI = VCCA or GND
A
(c)2006 Fairchild Semiconductor Corporation FXLH1T45 Rev. 1.0.4
www.fairchildsemi.com 4
FXLH1T45 Low Voltage 1-Bit Bi-directional Level Translator with Configurable Voltage Supplies and Bushold Data Inputs
DC Electrical Characteristics (Continued)
Symbol
II(HOLD)
Parameter
Bushold Input Minimum Drive Current
Conditions
VIN = 0.8 VIN = 2.0 VIN = 0.7 VIN = 1.6 VIN = 0.57 VIN = 1.07 VIN = 0.49 VIN = 0.91 VIN = 0.11 VIN = 0.99
VCCI (V)
3.0 3.0 2.3 2.3 1.65 1.65 1.4 1.4 1.1 1.1 3.6 3.6 2.7 2.7 1.95 1.95 1.6 1.6 1.4 1.4 0 0 0 0 1.1-3.6 0 1.1-3.6 1.1-3.6 0 3.6
VCCO (V)
3.0 3.0 2.3 2.3 1.65 1.65 1.4 1.4 1.1 1.1 3.6 3.6 2.7 2.7 1.95 1.95 1.6 1.6 1.4 1.4 3.6 3.6 3.6 3.6 1.1-3.6 1.1-3.6 0 0 1.1-3.6 3.6
Min.
75.0 -75.0 45.0 -45.0 25.0 -25.0 11.0 -11.0 - - 450 -450 300 -300 200 -200 120 -120 80.0 -80.0 - - - - - - - - - -
Typ.
- - - - - - - - 4.0 -4.0 - - - - - - - - - - - - - - - - - - - -
Max.
- - - - - - - - - - - - - - - - - - - - 10.0 10.0 10.0 10.0 20.0 -10.0 10.0 -10.0 10.0 500
Units
A
II(OD)
Bushold Input Over-Drive Current-to-Change State
(5) (6) (5) (6) (5) (6) (5) (6) (5) (6)
A
IOFF
Power Off Leakage Current
An, VCCA = VCCI, VI = 0V to 3.6V Bn, VCCB = VCCI, VI = 0V to 3.6V
A
IOZ
3-STATE Output Leakage
An, VCCA = VCCO, VO = 0V or 3.6V Bn, VCCB = VCCO, VO = 0V or 3.6V
A
ICCA/B ICCA ICCB ICCA/B
Quiescent Supply Current(7) Quiescent Supply Current Quiescent Supply Current Increase in ICC per Input; Other Inputs at VCC or GND
VI = VCCI or GND; IO = 0 VI = VCCA or GND; IO = 0 VI = VCCA or GND; IO = 0 VI = VCCB or GND; IO = 0 VI = VCCB or GND; IO = 0 VIH = 3.0
A A A A A A
Notes: 3. 4. 5. 6. 7. VCCI = the VCC associated with the data input under test. VCCO = the VCC associated with the output under test. An external driver must source at least the specified current to switch LOW-to-HIGH. An external driver must source at least the specified current to switch HIGH-to-LOW. Reflects current per supply, VCCA or VCCB.
(c)2006 Fairchild Semiconductor Corporation FXLH1T45 Rev. 1.0.4
www.fairchildsemi.com 5
FXLH1T45 Low Voltage 1-Bit Bi-directional Level Translator with Configurable Voltage Supplies and Bushold Data Inputs
AC Electrical Characteristics
VCCA = 3.0V to 3.6V
TA = -40C to +85C VCCB = VCCB = 3.0V to 3.6V 2.3V to 2.7V Symbol
tPLH, tPHL
VCCB = 1.65V to 1.95V Min.
0.5 0.3 0.7 1.0 0.7 0.2
VCCB = VCCB = 1.4V to 1.6V 1.1V to 1.3V Min.
0.6 0.5 0.8 2.0 1.5 0.2
Parameter
Propagation Delay A to B Propagation Delay B to A
Min.
0.2 0.2 0.4 0.4 0.2 0.2
Max.
3.5 3.5 7.2 7.3 3.8 3.7
Min.
0.3 0.2 0.5 0.4 0.2 0.2
Max.
3.9 3.8 7.6 7.8 4.0 3.7
Max.
5.4 4.0 9.1 8.8 4.8 3.7
Max.
6.8 4.3 10.5 10.5 6.2 3.7
Min.
1.4 0.8 1.6 2.8 2.0 0.2
Max. Units
22.0 13.0 25.7 30.0 17.0 3.7 ns ns ns
tPZH, tPZL(8) Output Enable T/R to B Output Enable T/R to A tPHZ, tPLZ Output Disable T/R to B Output Disable T/R to A
VCCA = 2.3V to 2.7V
TA = -40C to +85C VCCB = VCCB = 3.0V to 3.6V 2.3V to 2.7V Symbol
tPLH, tPHL
VCCB = 1.65V to 1.95V Min.
0.5 0.5 0.7 1.2 0.7 0.2
VCCB = VCCB = 1.4V to 1.6V 1.1V to 1.3V Min.
0.8 0.5 1.0 2.0 1.5 0.2
Parameter
Propagation Delay A to B Propagation Delay B to A
Min.
0.2 0.3 0.4 0.5 0.2 0.2
Max.
3.8 3.9 7.8 8.0 4.1 4.0
Min.
0.4 0.4 0.6 0.6 0.2 0.2
Max.
4.2 4.2 8.2 8.5 4.3 4.0
Max.
5.6 4.5 9.6 9.3 4.8 4.0
Max.
6.9 4.8 10.9 11.5 6.7 4.0
Min.
1.4 1.0 1.6 3.0 2.0 0.2
Max. Units
22.0 7.0 26.0 24.0 17.0 4.0 ns ns ns
tPZH, tPZL(8) Output Enable T/R to B Output Enable T/R to A tPHZ, tPLZ Output Disable T/R to B Output Disable T/R to A
VCCA = 1.65V to 1.95V
TA = -40C to +85C VCCB = VCCB = 3.0V to 3.6V 2.3V to 2.7V Symbol
tPLH, tPHL tPZH, tPZL(8) tPHZ, tPLZ
VCCB = 1.65V to 1.95V Min.
0.8 0.8 1.3 1.6 0.8 0.5
VCCB = VCCB = 1.4V to 1.6V 1.1V to 1.3V Min.
0.9 1.0 1.4 2.5 1.5 0.5
Parameter
Propagation Delay A to B Propagation Delay B to A Output Enable T/R to B Output Enable T/R to A Output Disable T/R to B Output Disable T/R to A
Min.
0.3 0.5 0.8 0.7 0.2 0.5
Max.
4.0 5.4 9.0 10.5 5.1 5.0
Min.
0.5 0.5 1.0 0.7 0.2 0.5
Max.
4.5 5.6 9.5 10.8 5.2 5.0
Max.
5.7 5.7 10.7 10.9 5.2 5.0
Max.
7.1 6.0 12.1 13.0 7.0 5.0
Min.
1.5 1.2 2.0 3.2 2.0 0.5
Max. Units
22.0 8.0 27.0 25.0 17.0 5.0 ns ns ns
(c)2006 Fairchild Semiconductor Corporation FXLH1T45 Rev. 1.0.4
www.fairchildsemi.com 6
FXLH1T45 Low Voltage 1-Bit Bi-directional Level Translator with Configurable Voltage Supplies and Bushold Data Inputs
AC Electrical Characteristics (Continued)
VCCA = 1.4V to 1.6V
TA = -40C to +85C VCCB = VCCB = 3.0V to 3.6V 2.3V to 2.7V Symbol
tPLH, tPHL
VCCB = 1.65V to 1.95V Min.
1.0 0.9 2.0 1.8 0.9 1.0
VCCB = VCCB = 1.4V to 1.6V 1.1V to 1.3V Min.
1.0 1.0 2.0 2.5 1.5 1.0
Parameter
Propagation Delay A to B Propagation Delay B to A
Min.
0.5 0.6 1.5 1.0 0.4 1.0
Max.
4.3 6.8 10.3 12.9 6.1 6.0
Min.
0.5 0.8 1.5 1.2 0.4 1.0
Max.
4.8 6.9 10.8 13.1 6.2 6.0
Max.
6.0 7.1 12.0 13.3 6.2 6.0
Max.
7.3 7.3 13.3 14.8 7.5 6.0
Min.
1.5 1.3 2.5 3.3 2.0 1.0
Max.
22.0 9.5 28.0 27.5 18.0 6.0
Units
ns
tPZH, tPZL(8) Output Enable T/R to B Output Enable T/R to A tPHZ, tPLZ Output Disable T/R to B Output Disable T/R to A
ns
ns
VCCA = 1.1V to 1.3V
TA = -40C to +85C VCCB = VCCB = 3.0V to 3.6V 2.3V to 2.7V Symbol
tPLH, tPHL tPZH, tPZL(8) tPHZ, tPLZ
VCCB = 1.65V to 1.95V Min.
1.2 1.5 3.2 2.5 1.0 2.0
VCCB = VCCB = 1.4V to 1.6V 1.1V to 1.3V Min.
1.3 1.5 3.3 3.5 2.0 2.0
Parameter
Propagation Delay A to B Propagation Delay B to A Output Enable T/R to B Output Enable T/R to A Output Disable T/R to B Output Disable T/R to A
Min.
0.8 1.4 2.8 2.4 1.0 2.0
Max.
13.0 22.0 28.0 37.0 15.0 15.0
Min.
1.0 1.4 3.0 2.1 0.7 2.0
Max.
7.0 22.0 19.0 29.0 7.0 12.0
Max.
8.0 22.0 20.0 30.0 8.0 12.0
Max.
9.5 22.0 21.5 32.0 10.0 12.0
Min.
2.0 2.0 4.0 4.0 2.0 2.0
Max. Units
24.0 24.0 36.0 44.0 20.0 12.0 ns ns ns
Note: 8. The enable time, tPZH or tPZL, is the time for the FXLH1T45 to return to active operation after a direction change. The enable time specifies the worst-case delay from the time the T/R pin is switched until a valid output signal is expected. For example, to change direction to B-to-A operation, the T/R pin is switched from HIGH-to-LOW. The enable time for this case is found by adding the disable time for T/R to B to the propagation delay for B to A. The formulas for calculating enable times are the following: tPZH (T/R to A) = tPLZ (T/R to B) + tPLH (B to A) tPZL (T/R to A) = tPHZ (T/R to B) + tPHL (B to A) tPZH (T/R to B) = tPLZ (T/R to A) + tPLH (A to B) tPZL (T/R to B) = tPHZ (T/R to A) + tPHL (A to B)
Capacitance
TA = +25C Symbol CIN CI/O CPD Parameter Input Capacitance Control Pin (T/R) Input/Output Capacitance An, Bn Ports Power Dissipation Capacitance Conditions VCCA = VCCB = 3.3V, VI = 0V or VCCA/B VCCA = VCCB = 3.3V, VI = 0V or VCCA/B VCCA = VCCB = 3.3V, VI = 0V or VCC, F = 10MHz Typical 4.0 5.0 20.0 Units pF pF pF
(c)2006 Fairchild Semiconductor Corporation FXLH1T45 Rev. 1.0.4
www.fairchildsemi.com 7
FXLH1T45 Low Voltage 1-Bit Bi-directional Level Translator with Configurable Voltage Supplies and Bushold Data Inputs
AC Loading and Waveforms
VCC TEST SIGNAL Rtr1
DUT
OPEN GND VCC x 2
tPLH, tPHL tPHZ tPLZ
CL
RL
Test
tPLH, tPHL tPLZ tPHZ
Switch
OPEN VCCO x 2 at VCCO = 3.3 0.3V, 2.5V 0.2V, 1.8V 0.15V, 1.5V 0.1V, 1.2V 0.1V GND
Figure 1. AC Test Circuit AC Load Table
VCCO
1.2V 0.1V 1.5V 0.1V 1.8V 0.15V 2.5V 0.2V 3.3V 0.3V
CL
15pF 15pF 15pF 15pF 15pF
RL
2k 2k 2k 2k 2k
Rtr1
2k 2k 2k 2k 2k
DATA IN tpxx DATA OUT
Vmi tpxx Vmo
VCCI GND VCCO
DIRECTION CONTROL tPZL DATA OUT Vmo tPLZ
Vmi
VCCA GND VY VOL
Input tR = tF = 2.0 ns, 10% to 90% Input tR = tF = 2.5ns, 10% to 90%, @ VI = 3.0V to 3.6V only
Input tR = tF = 2.0 ns, 10% to 90% Input tR = tF = 2.5ns, 10% to 90%, @ VI = 3.0V to 3.6V only
Figure 2. Waveform for Inverting and Non-Inverting Functions
Figure 3. 3-STATE Output Low Enable and Disable Times for Low Voltage Logic
VCCA GND VOH VX
DIRECTION CONTROL tPZH DATA OUT Vmo tPHZ
Vmi
Input tR = tF = 2.0 ns, 10% to 90% Input tR = tF = 2.5ns, 10% to 90%, @ VI = 3.0V to 3.6V only
Figure 4. 3-STATE Output High Enable and Disable Times for Low Voltage Logic
Symbol
Vmi Vmo VX VY
VCC 3.3V 0.3V
VCCI / 2 VCCO / 2 VOH - 0.3V VOL + 0.3V
2.5V 0.2V
VCCI / 2 VCCO / 2 VOH - 0.15V VOL + 0.15V
1.8V 0.15V
VCCI / 2 VCCO / 2 VOH - 0.15V VOL + 0.15V
1.5V 0.1V
VCCI / 2 VCCO / 2 VOH - 0.1V VOL + 0.1V
1.2V 0.1V
VCCI / 2 VCCO / 2 VOH - 0.1V VOL + 0.1V
For Vmi : VCCI = VCCA for Control Pin T/R or VCCA / 2
(c)2006 Fairchild Semiconductor Corporation FXLH1T45 Rev. 1.0.4
www.fairchildsemi.com 8
FXLH1T45 Low Voltage 1-Bit Bi-directional Level Translator with Configurable Voltage Supplies and Bushold Data Inputs
Tape and Reel Specification
Tape Format for MicroPak Package Designator
L6X
Tape Section
Leader (Start End) Carrier Trailer (Hub End)
Number Cavities
125 (typ) 5000 75 (typ)
Cavity Status
Empty Filled Empty
Cover Tape Status
Sealed Sealed Sealed
Tape Dimensions millimeters
Reel Dimensions inches (millimeters)
Tape Size
8mm
A
7.0 (177.8)
B
0.059 (1.50)
C
0.512 (13.00)
D
0.795 (20.20)
N
2.165 (55.00)
W1
0.331 +0.059 / -0.000 (8.40 +1.50 / -0.00)
W2
0.567 (14.40)
W3
W1 +0.078 / -0.039 (W1 +2.00 / -1.00)
www.fairchildsemi.com
(c)2006 Fairchild Semiconductor Corporation FXLH1T45 Rev. 1.0.4
9
FXLH1T45 Low Voltage 1-Bit Bi-directional Level Translator with Configurable Voltage Supplies and Bushold Data Inputs
Physical Dimensions millimeters unless otherwise noted
2X 0.05 C 1.45 B 2X 0.05 C (1)
1.00
(0.49) 5X (0.75) (0.52) 1X (0.30) 6X RECOMMENED LAND PATTERN 0.05 C 0.45 0.35
TOP VIEW 0.55MAX
A
PIN 1 0.05 C 0.05 0.00 C 0.25 0.15 6X 0.10 0.05 0.35 5X 0.25 0.40 5X 0.30 (0.05) 6X 0.5 BOTTOM VIEW (0.13) 4X CBA C
0.10 0.00 6X
DETAIL A
1.0
0.40 0.30
0.075 X 45 CHAMFER
DETAIL A PIN 1 TERMINAL
Notes: 1. Conforms to JEDEC standard M0-252 variation UAAD. 2. Dimensions are in millimeters. 3. Drawing conforms to ASME Y14.5M-1994.
MAC06AREVC
6-Lead MicroPak, 1.0mm Wide Package Number MAC06A
(c)2006 Fairchild Semiconductor Corporation FXLH1T45 Rev. 1.0.4
www.fairchildsemi.com 10
FXLH1T45 Low Voltage 1-Bit Bi-directional Level Translator with Configurable Voltage Supplies and Bushold Data Inputs
TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx Across the board. Around the world.TM ActiveArrayTM BottomlessTM Build it NowTM CoolFETTM CROSSVOLTTM CTLTM Current Transfer LogicTM DOMETM 2 E CMOSTM (R) EcoSPARK EnSignaTM FACT Quiet SeriesTM (R) FACT (R) FAST FASTrTM FPSTM (R) FRFET GlobalOptoisolatorTM GTOTM HiSeCTM
(R)
i-LoTM ImpliedDisconnectTM IntelliMAXTM ISOPLANARTM MICROCOUPLERTM MicroPakTM MICROWIRETM Motion-SPMTM MSXTM MSXProTM OCXTM OCXProTM (R) OPTOLOGIC (R) OPTOPLANAR PACMANTM PDP-SPMTM POPTM (R) Power220 (R) Power247 PowerEdgeTM PowerSaverTM
Power-SPMTM (R) PowerTrench Programmable Active DroopTM (R) QFET QSTM QT OptoelectronicsTM Quiet SeriesTM RapidConfigureTM RapidConnectTM ScalarPumpTM SMART STARTTM (R) SPM STEALTHTM SuperFETTM SuperSOTTM -3 SuperSOTTM -6 SuperSOTTM -8 SyncFETTM TCMTM (R) The Power Franchise
TM
TinyBoostTM TinyBuckTM (R) TinyLogic TINYOPTOTM TinyPowerTM TinyWireTM TruTranslationTM SerDesTM (R) UHC UniFETTM VCXTM WireTM
DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD'S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Preliminary Product Status Formative or In Design First Production Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only.
Rev. I26
2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.
No Identification Needed
Full Production
Obsolete
Not In Production
(c)2006 Fairchild Semiconductor Corporation FXLH1T45 Rev. 1.0.4
www.fairchildsemi.com 11

▲Up To Search▲

Price & Availability of FXLH1T45L6X

	To Download FXLH1T45L6X Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .