|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HWS432 GaAs DC-6 GHz SPDT Switch September 2005 V4 Features * Low Insertion Loss : 0.4 dB @ 2.5 GHz QFN12L (3 x 3 mm) 0.5 dB @ 5.8 GHz * Isolation: 24 dB @ 2.5 GHz 27 dB @ 5.8 GHz * Low DC Power Consumption * Miniature QFN12L (3x3 mm) Plastic Lead(Pb) Free Package * PHEMT process * Lead Free and RoHS (Restrict of Hazardous Substances) Compliant Version of HWS382 Description The HWS432 is a GaAs PHEMT MMIC SPDT switch operating at DC-6 GHz in a low cost miniature QFN12L (3 x 3 mm) plastic lead (Pb) free package. The HWS432 features low insertion loss and high isolation with very low DC power consumption. This switch can be used in IEEE 802.11a/b/g WLAN PC card and access point applications as transmit/receive switch, antenna diversity switch, or band-selection switch. Electrical Specifications at 25 with 0, +3V Control Voltages C Parameter Insertion Loss Test Conditions 0.10-6.00 GHz 2.40-2.50 GHz 4.90-6.00 GHz 0.10-6.00 GHz 2.40-2.50 GHz 4.90-6.00 GHz 0.10-6.00 GHz 2.40-2.50 GHz 4.90-6.00 GHz 5.00 GHz @+3V 5.00 GHz @+5V 22 22 12 10 Min. Typ. 0.5 0.4 0.5 24 24 27 15 20 18 30 34 30 5 100 Max. Unit dB dB dB dB dB dB dB dB dB dBm dBm nsec uA 0.6 0.8 Isolation Return Loss Input Power for One dB Compression Switching Time Control Current Note: All measurements made in a 50 ohm system with 0/+3.0V control voltages, unless otherwise specified. Hexawave Inc. 2 Prosperity Road II, Science-Based Industrial Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw All specifications are subject to change without notice. HWS432 GaAs DC-6 GHz SPDT Switch September 2005 V4 Typical Performance Data with 8pF Capacitors @ +25C Insertion Loss vs Frequency -0.1 -0.2 Insertion Loss(dB) Absolute Maximum Ratings Parameter RF Input Power Control Voltage Operating Temperature Storage Temperature Absolute Maximum +32 dBm @ +3V +6V -40 to +85C C -65 to +150 C C -0.3 -0.4 -0.5 -0.6 Pin Out (Top View) RFC -0.7 GND CB GND 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency(GHz) 5.5 6.0 12 11 10 9 8 7 Isolation vs Frequency -10 -15 Isolation(dB) VC1 GND RF1 CB 1 2 3 4 5 6 VC2 GND RF2 CB -20 -25 -30 -35 -40 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency(GHz) 5.5 6.0 Note: 1. DC blocking capacitors CB=8pF are required on all RF ports. 2. Exposed pad in the bottom must be connected to ground by via holes. Logic Table for Switch On-Path Return Loss vs Frequency -5 -10 Return Loss(dB) GND GND GND VC1 0 1 VC2 1 0 RFC-RF1 Insertion Loss Isolation RFC-RF2 Isolation Insertion Loss -15 -20 -25 -30 -35 2.0 2.5 3.0 3.5 4.0 4.5 5.0 Frequency(GHz) 5.5 6.0 `1' = +3V to +5V `0' = 0V to +0.2V Hexawave Inc. 2 Prosperity Road II, Science-Based Industrial Park, Hsinchu, Taiwan. TEL 886-3-578-5100 FAX 886-3-577-0512 http://www.hw.com.tw All specifications are subject to change without notice. |
Price & Availability of HWS432 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |