 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| (R) SF2073B 456.00 MHz SAW Filter * * * * * Designed for 802.16 and WIMAX Receiver IF Application Low Insertion Loss 5.0 X 7.0 mm Surface-Mount Case Differential or Single Ended Input and Output Complies with Directive 2002/95/EC (RoHS) Pb Absolute Maximum Ratings Rating Maximum Incident Power in Passband Max. DC voltage between any 2 terminals Storage Temperature Range Suitable for lead-free soldering - Max Soldering Temperature Value +13 30 -40 to +85 260C for 30 s Units dBm VDC C SMP-03 Electrical Characteristics Characteristic Nominal Frequency Minimum Insertion Attenuation Amplitude Variation Absolute Group Delay (at fN) Group Delay Variation (p-p) Relative Attenuation Sym fN min Notes 1 1 1 1 1 1 1, 2 1, 2 1, 2 1, 2 1, 2 Min Typ 456.000 12.5 0.6 0.8 0.5 35 50 64 40 40 60 Max 14.5 1.5 2.5 0.7 100 Units MHz dB dB p-p s ns fN 5.0 MHz fN 5.2 MHz fN 5.0 MHz 256 to 360 MHz 360 to 416.0 MHz 416 to 443 MHz 468 to 656 MHz 656 to 946 MHz Operating Storage Temperature Range Case Style Lid Symbolization (YY=year, WW=week, S=shift) 35 38 35 35 50 -40 85 -40 85 SMP-03 7 x 5 mm Nominal Footprint RFM SF2073B YYWWS dB C I. 200 ohm Matching ............page 2 II. 50 ohm Matching .............page 4 III. SMI 7035 Matching .......page 6 Notes: 1. 2. 3. 4. 5. 6. 7. 8. 9. Unless noted otherwise, all specifications apply over the operating temperature range. Rejection is measured as attenuation below the minimum IL point in the passband. Rejection in final user application is dependent on PCB layout and external impedance matching design. See Application Note No. 42 for details. The design, manufacturing process, and specifications of this filter are subject to change. Tape and Reel Standard ANSI / EIA 481. Either Port 1 or Port 2 may be used for either input or output in the design. However, impedances and impedance matching may vary between Port 1 and Port 2, so that the filter must always be installed in one direction per the circuit design. US and international patents may apply. RFM, stylized RFM logo, and RF Monolithics, Inc. are registered trademarks of RF Monolithics, Inc. (c)Copyright 1999, RF Monolithics Inc. Electrostatic Sensitive Device. Observe precautions for handling. RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF2073B-102406 Page 1 of 9 456.00 MHz SAW Filter I. Impedance Matching for Differential 200 Ohm Load: Coilcraft Inductors (SAW Matched to 200 Ohms Balanced, 4:1 Transformers Account for 2dB of Loss) 18nh S11 3.9pf 1:4 P1 18nh P10 SF2073B DEMO BALANCE P6 P5 16nh 3.9pf 16nh 4:1 S22 0603 coilcraft inductor RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF2073B-102406 Page 2 of 9 456.00 MHz SAW Filter I. Impedance Matching for Differential 200 Ohm Load: Coilcraft Inductors (SAW Matched to 200 Ohms Balanced, 4:1 Transformers Account for 2dB of Loss) 1 May 2006 15:05:21 CH1 S11 1 U FS 1 : 54 . 389 10 . 383 456 . 000 000 MHz SF2073B demo 16 3 . 6239 nH CH3 S22 1 : 58 . 283 456 . 000 000 1 U FS 1 . 2910 MHz 450 . 60 pH 1 1 Cor Full Cor CENTR CH2 456 . 000 S21 MHz SPAN 10 dB/ 40 . 000 MHz CENTR 456 . 000 1 : 0 . 0000 MHz dB SPAN 0 . 000 40 . 000 000 MHz MHz LOG REF -15 dB CH2 Max Cor Full Markers REF=1 MHz MHz BW : 1 cent : 10 . 165654 456 . 277377 Q: 44 . 884 3 2 4 1_ loss : -14 . 794 dB START 436 . 000 000 MHz STOP 476 . 000 000 MHz 1 May 2006 15:13:37 CH1 S21 DEL 50 ns/ REF 580 ns 3 : -1 . 3663 ns -10 . 000 000 MHz SF2073B demo 16 CH1 Smo C mean s . dev p-p Markers REF=2 ns ns ns : 575 . 92 : 6 . 9993 : 30 . 436 3 Full 1 2 CH3 S21 LOG 1 dB/ REF -15.41 dB 3 : - . 89960 dB -10 . 000 000 MHz CH3 mean s . dev 3 1 2 p-p : -15 Markers REF=2 . 215 dB dB dB C : . 28750 : 1 . 2745 CENTER 456 . 000 000 MHz SPAN 14 . 000 000 MHz RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF2073B-102406 Page 3 of 9 456.00 MHz SAW Filter II. Impedance Matching for Single Ended 50 Ohm load. 50 ohm 50 ohm 9 Jun 2005 16:00:19 CH1 S21 DEL 20 ns/ REF 626.4 ns 2 : -2 . 3948 ns 10 . 000 000 MHz CH1 Smo Cor mean s . dev p-p PRm 2 Markers REF=1 ns ns ns : 534 . 52 : 5 . 6156 : 23 . 778 1 CH1 CH2 S21 CENTER LOG 456 . 000 .5 dB/ 000 MHz REF -9.386 dB 2 : - . 37890 SPAN dB 12 . 000 10 . 000 000 MHz MHz 000 SF2073B narrow span CH2 C mean s . dev p-p PRm 2 1 : -11 Markers REF=1 . 551 dB dB dB : . 10500 : . 62390 CH2 CENTER 456 . 000 000 MHz SPAN 12 . 000 000 MHz RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF2073B-102406 Page 4 of 9 456.00 MHz SAW Filter II. Impedance Matching for Single Ended 50 Ohm load. 3 Jun 2005 14:55:19 CH1 S11 1 : 50 . 992 456 . 000 000 1 U FS -1 . 4707 MHz 237 . 32 pF CH3 S22 1 : 47 . 150 456 . 000 000 1 U FS 10 . 828 MHz 3 . 7793 nH 1 1 PRm Cor Cor CENTR CH2 SF2073B single 50 456 . 000 S21 MHz SPAN 10 dB/ 80 . 000 MHz CENTR 456 . 000 1 : 0 . 0000 MHz dB SPAN 0 . 000 80 . 000 000 MHz MHz LOG REF -40 dB 1 CH2 Max 4 cent BW : : Markers REF=1 MHz MHz Cor 3 2 10 . 971922 456 . 090221 Q: 41 . 569 PRm 1_ loss : -11 . 233 dB CENTER 456 . 000 000 MHz SPAN 80 . 000 000 MHz RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF2073B-102406 Page 5 of 9 456.00 MHz SAW Filter III. Impedance Matching on SMI Radio Board: SMI 7035 RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF2073B-102406 Page 6 of 9 456.00 MHz SAW Filter RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF2073B-102406 Page 7 of 9 456.00 MHz SAW Filter 10-Terminal Ceramic Surface-Mount Case 7 x 5 mm Nominal Footprint Case Dimensions Dimension A B C D E H J K P Min 6.80 4.80 1.50 .47 2.41 0.87 4.87 2.87 1.14 mm Nom 7.00 5.00 1.65 0.60 2.54 1.0 5.00 3.00 1.27 Max 7.20 5.20 2.00 .73 2.67 1.13 5.13 3.13 1.40 Min 0.268 0.189 0.059 0.019 0.095 0.034 0.192 0.113 0.045 Inches Nom 0.276 0.197 0.065 0.024 0.100 0.039 0.197 0.118 0.050 Max 0.283 0.205 0.079 0.029 0.105 0.044 0.202 0.123 0.055 SMP-03 Case Recommended PCB Footprint Materials Solder Pad Termination Lid Body Pb Free Electrical Connections Connection Port 1 Port 2 Input or Return Return or Input Output or Return Return or Output Ground Single Ended Operation Differential Operation Terminals 10 1 5 6 All others Return is ground Return is hot Au plating 30 - 60 inches (76.2-152 m) over 80200 inches (203-508 m) Ni. Fe-Ni-Co Alloy Electroless Nickel Plate (8-11% Phosphorus) 100-200 inches Thick Al2O3 Ceramic C B H H E A D P K J RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF2073B-102406 Page 8 of 9 456.00 MHz Tape and Reel Specifications SAW Filter "B " Nominal Size Inches 100 REF. "B" REF. Quantity Per Reel 500 2000 millimeters 178 330 7 13 See Detail "A" 12.0 0 13. 20 .2 2.0 COMPONENT ORIENTATION and DIMENSIONS Carrier Tape Dimensions Ao Bo Ko Pitch W 5.5 mm 7.5 mm 2.0 mm 8.0 mm 16.0 mm Tolerance 0.1mm 0.1mm 0.1mm 0.1mm 0.2mm PIN #1 USER DIRECTION OF FEED RF Monolithics, Inc. Phone: (972) 233-2903 Fax: (972) 387-8148 RFM Europe Phone: 44 1963 251383 Fax: 44 1963 251510 (c)1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc. E-mail: info@rfm.com http://www.rfm.com SF2073B-102406 Page 9 of 9 |
Price & Availability of SF2073B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |