 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PI5V512 Low On-Resistance, 5V Wide-Bandwidth 5-port, 2:1 Mux/DeMux VideoSwitch Features * High-performance, low-cost solution to switch between video sources * Wide bandwidth: 550 MHz * Low On-Resistance: 5 * Low crosstalk at 10 MHz: -90dB * Ultra-low quiescent power (0.1A typical) * Single supply operation: +5.0V * Fast switching: 10ns * Packaging (Pb-free & Green available): - 24-pin 150-mil wide plastic QSOP (Q) Description Pericom Semiconductor's PI5V512 is a true bidirectional 5-Port 2:1 multiplexer/demultiplexer with Hi-Z outputs that is recommended for both RGB and composite video switching applications. With the additional 2 ports, vertical and horizontal synchronous signals can be switched in addition to switching the RGB and composite signals between different components, such as DVD, VCR, PCs and etc. The video switch can be driven from a current output RAMDAC or voltage output composite video source. Low On-Resistance, Low Crosstalk, Low OFF Isolation and wide bandwidth features make it ideal for video and other applications. The device also has exceptional high current capability which is far greater than most analog switches offered today. A single 5V supply is all that is required for operation. The switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. The PI5V512 offers a high-performance (550 MHz), low-cost solution to switch between video sources. Applications * * * Projection TV and LCD TV Video consumer applications Analog video signal processing Block Diagram IA0 IA1 IB0 IB1 IC0 IC1 ID0 ID1 IE0 IE1 Pin Configuration YA IA0 S 1 2 3 4 5 6 7 8 9 10 11 12 24 23 22 21 20 19 18 17 16 15 14 13 YB YC YD GND IA1 YA IB0 GND IB1 YB IC0 IC1 GND VCC EN IE0 GND IE1 YE ID0 GND ID1 YD GND YC YE DECODER/DRIVERS EN S Truth Table EN 0 0 1 S 0 1 X ON Switch IA0, IB0, IC0, ID0, IE0 IA1, IB1, IC1, ID1, IE1 Disabled 1 PS8753A 11/02/04 PI5V512 Low On-Resistance, 5V Wide-Bandwidth 5-port, 2:1 Mux/DeMux VideoSwitch Maximum Ratings (Above which the useful life may be impaired. For user guidelines, not tested.) Storage Temperature ..........................................................-65C to +150C Ambient Temperature with Power Applied .........................-40C to +85C Supply Voltage to Ground Potential (Inputs & VCC Only)...-0.5V to +7.0V Supply Voltage to Ground Potential (Outputs & D/O Only) -0.5V to +7.0V DC Input Voltage ..................................................................-0.5V to +7.0V DC Output Current.............................................................................120mA Power Dissipation .................................................................................0.5W Note: Stresses greater than those listed under MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. Pin Description Pin Name IA0, IB0, IC0, ID0, IEQ, IA1, IB1, IC1, ID1, IE1 Description Analog Video I/O Select Input Enable Analog Video I/O Ground Power S EN YA, YB, YC, DE, YD, EE GND VCC DC Electrical Characteristics (Over the Operating Range, TA = -40C to +85C, VCC = 5V 5%) Parameters VANALOG VIH VIL IIH IIL IO VIK VH RON Description Analog Signal Range Input HIGH Voltage Input LOW Voltage Input HIGH Current Input LOW Current Analog Output Leakage Current Clamp Diode Voltage Input Hysteresis at Control Pins Switch On-Resistance(3) VCC = Min., VIN = 1.0V, ION = 13mA VCC = Min., VIN = 2.0V, ION = 26mA Guaranteed Logic HIGH Level Guaranteed Logic LOW Level VCC = Max., VIN = VCC VCC = Max., VIN = GND 0 I0, I1 or D VCC, Switch OFF VCC = Min., IIN = -18mA -0.7 -1.2 150 5 7 8 12 Test Conditions(1) Min. 0 2.0 -0.5 0.8 1 1 1 V mV A Typ.(2) Max. 2.0 V Units Notes: 1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device type. 2. Typical values are at Vcc = 5.0V, TA = 25C ambient and maximum loading. 3. Measured by the voltage drop between I0, I1, and D I/O pins at indicated current through the switch. On-Resistance is determined by the lower of the voltages on the I0, I1, and D I/O pins. 2 PS8753A 11/02/04 PI5V512 Low On-Resistance, 5V Wide-Bandwidth 5-port, 2:1 Mux/DeMux VideoSwitch Dynamic Characteristics (Over the Operating Range, TA = -40C to +85C, VCC = 5V 5%) Parameters tON tOFF BW(1) Description Turn On Time Turn Off Time -3 dB Bandwidth Crosstalk Input/Enable Capacitance Capacitance, Switch Off Capacitance, Switch On Off Isolation Test Conditions RL = 75, CL = 20pF, See Fig. 1 RL = 75, CL = 20pF, See Fig. 1 See Fig. 2, CL = 0pF 10 MHz, See Fig. 2 VIN = 0V, f = 1 MHz VIN = 0V, f = 1 MHz VIN = 0V, f = 1 MHz 10 MHz, See Fig 2 -60 100 Min. Typ. 2.5 1.1 550 -90 6 6 11 dB Max. 5 5 Unit ns MHz dB pF XTALK(1) CIN(1) COFF(1) CON(1) OIRR Notes: 1. This parameter is determined by device characterization but is not production tested. Power Supply Characteristics Parameters ICC ICC Description Quiescent Power Supply Current Supply Current per Input @ TTL HIGH Supply Current per Input per MHz(4) VCC = Max. VCC = Max. VCC = Max., S1, S2 and D Pins Open EN = GND Control Input Toggling 50% Duty Cycle Test Conditions(1) IN = GND or VCC IN = 3.4V(3) Min. Typ(2) 0.1 Max. 3.0 2.5 Units A mA mA/ MHz ICCD 0.25 Notes: 1. For Max. or Min. conditions, use appropriate value specified under Electrical Characteristics for the applicable device. 2. Typical values are at VCC = 5.0V, +25C ambient. 3. Per TTL driven input (VIN = 3.4V, control inputs only); I0, I1, and Y pins do not contribute to Icc. 4. This current applies to the control inputs only and represent the current required to switch internal capacitance at the specified frequency. The I0, I1, and Y I/O pins generate no significant AC or DC currents as they transition. This parameter is not tested, but is guaranteed by design. 3 PS8753A 11/02/04 PI5V512 Low On-Resistance, 5V Wide-Bandwidth 5-port, 2:1 Mux/DeMux VideoSwitch Definitions Symbol RON IO VIN VEN CIN COFF CON VIH VIL IIH (IIL) tON tOFF BW XTALK OIRR Description Resistance between source and drain with switch in the ON state. Output leakage current measured at I0, I1, and Y with the switch OFF. Digital voltage at the S pin that selects between I0 and I1 analog inputs. A voltage that ENABLES the chip. Capacitance at the digital inputs. Capacitance at analog I/O (I0, I1, and Y) with switch OFF. Capacitance at analog I/O (I0, I1, and Y) with switch ON. Minimum input voltage for logic HIGH. Minimum input voltage for logic LOW. Input current of the digital input. Propagation delay measured between 50% of the digital input to 90% of the analog output when switch is turned ON. The peak analog voltage is 0.714V. Propagation delay measured between 50% of the digital input to 90% of the analog output when switch is turned OFF. The peak analog voltage is 0.714V. Frequency response of the switch in the ON state measured at 3dB down. Unwanted signal coupled from channel to channel, measured in -dB. XTALK = 20 LOG VOUT/VIN. This is nonadjacent crosstalk. Off isolation is the resistance (measured in -dB) between the input and output with the switch off (NO). 4 PS8753A 11/02/04 PI5V512 Low On-Resistance, 5V Wide-Bandwidth 5-port, 2:1 Mux/DeMux VideoSwitch Vcc Vcc 3V IN S D 75 VOUT 20pF Digital Input Analog Output tON 50% 50% 90% 90% tOFF PI5V512 GND EN Figure 1. Switching Time HP4396 S1 HP11667A R1 T1 PI5V512 CL Figure 2. Gain/Phase, Crosstalk, Off-Isolation 5 PS8753A 11/02/04 PI5V512 Low On-Resistance, 5V Wide-Bandwidth 5-port, 2:1 Mux/DeMux VideoSwitch CH1 S21 log MAG 1 dB/ REF -.288 dB -3 dB 574.65511871 MHz ref = -.288dB 1dB/div IF BW 300 Hz Start 100 kHx POWER 0 dBm SWP 1.624 sec STOP 1.8 Ghz Cancel Figure 3. Bandwidth @ -3dB ref = CH1 S21 log MAG -29.2dB 7.96 dB/ REF -29.2 dB -94.242 dB 10 MHz 7.96db/div IF BW 300 Hz Start 100 kHx POWER 0 dBm 10 MHz SWP 1.624 sec STOP 1.8 Ghz Figure 4. Crosstalk @ 25C, VCC = 4.75V 6 PS8753A 11/02/04 PI5V512 Low On-Resistance, 5V Wide-Bandwidth 5-port, 2:1 Mux/DeMux VideoSwitch ref = -29.2dB CH1 S21 log MAG 7.95 dB/ REF -29.2 dB -61.00 dB 10MHz 7.96db/div IF BW 300 Hz Start 100 kHx 10 MHz SWP 1.624 sec STOP 1.8 Ghz Figure 5. Off Isolation, 25C VCC = 4.75 700 600 3db Bandwidth 500 400 300 200 100 0 0 pf 10 pf 20 pf 30 pf 40 pf 50 pf Capacitance Load Figure 6. Bandwidth vs Capacitance 7 PS8753A 11/02/04 PI5V512 Low On-Resistance, 5V Wide-Bandwidth 5-port, 2:1 Mux/DeMux VideoSwitch Packaging Mechanical: 24-pin QSOP (Q) 24 .008 0.20 MIN. .008 .013 0.20 0.33 .150 .157 3.81 3.99 Guage Plane .010 0.254 1 .337 .344 Detail A 8.56 8.74 .016 .035 0.41 0.89 .041 1.04 REF 0-6 .033 0.84 .053 .069 1.35 1.75 .015 x 45 0.38 Detail A SEATING PLANE .004 0.101 .010 0.254 .007 .010 0.178 0.254 .016 .050 0.406 1.27 .228 .244 5.79 6.20 .025 typical 0.635 .008 0.203 .012 0.305 X.XX DENOTES DIMENSIONS X.XX IN MILLIMETERS Ordering Information Ordering Code PI5V512Q PI5V512QE Package Code Q Q Package Description 24-pin 150-mil wide plastic QSOP Pb-free & Green, 24-pin 150-mil wide plastic QSOP Notes: 1. Thermal characteristics can be found on the company web site at www.pericom.com/packaging/ Pericom Semiconductor Corporation * 1-800-435-2336 * www.pericom.com 8 PS8753A 11/02/04 |
Price & Availability of PI5V512
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |