Part Number Hot Search : 
2SK24 6034482 VS2AUF MUR1640 K9GAG08 1N4747 ENA1429A SC6BA21
Product Description
Full Text Search
 

To Download PSPS-25-12 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 PSPS25 Series
Single Output Up to 25 Watts AC/DC Power Supply
FEATURES
* Low Cost * High Reliability * 2 Year Warranty * 100% Full Load Burn-In Test * Low Leakage Current < 0.5mA * Universal AC Input/ Full Range * Cooling by Free Air Convection * Fixed Switching Frequency at 100KHz * Short Circuit, Overload, Over Voltage, and Over Temperature Protected
SPECIFICATIONS: PSPS25 Series
All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage 85 - 264VAC (120 - 370VDC) Input Frequency 47 ~ 63Hz AC Current (typical) 0.6A @ 115VAC 0.4A @ 230VAC Inrush Current (typical) 36A cold start Leakage Current < 0.5mA @ 240VAC OUTPUT SPECIFICATIONS Output Voltage See Table Output Voltage Tolerance (See Note 3) PSPS-25-3.3: 3.0% 2.0% for all other models Output Power See Table Line Regulation 3.3, 5, 7.5V outputs: 0.5%; 12, 13.5, 15V outputs: 0.3%; 24, 27, 48V outputs: 0.2 Load Regulation 3.3V output: 2.5%; 5 & 7.5V outputs: 2.0%; 12, 13.5, 15V outputs: 1.0%; 24, 27, 48V outputs: 0.5% Output Current See Table Ripple & Noise (See Note 2) See Table Setup, Rise Time 200ms, 20ms @ 230VAC 200ms, 30ms @ 115VAC and full load Hold Up Time 100ms @ 230VAC 20ms @ 115VAC and full load Temperature Coefficient 0.03%/C (0~50C) PROTECTION See Table Over Voltage Protection Protection Type: Shutoff output voltage, clamping by Zener diode. Above 105% rated output power Overload Protection Protection Type: Hiccup mode, recovers automatically after fault condition is removed. Tj 135C typically (U1) detect on main control IC. Over Temperature Protection Type: Shutdown output voltage, recovers automatically after temperature goes down. GENERAL SPECIFICATIONS Switching Frequency (fixed) 100KHz Efficiency (typical) See Table Withstand Voltage 3KVAC (input to output), 1.5KVAC (input to FG), 0.5KVAC (output to FG). Isolation Resistance 100M / 500VDC (input to output, input to FG, output to FG) ENVIRONMENTAL SPECIFICATIONS Working Temperature -10C to +60C (refer to output load derating curve) Storage Temperature -20C to +85C Working Humidity (non-condensing) 20% ~ 90% RH non-condensing Storage Humidity (non-condensing) 10% ~ 95% RH Vibration 10~500Hz, 2G 10min./1cycle, Period for 60 minutes each along X, Y, and Z axes. MTBF 576,400 hours min. MIL-HDBK-217 (25C) PHYSICAL SPECIFICATIONS Weight 18 oz. Dimensions 107(L) x 61(W) x 28(H) mm Warranty 2 years SAFETY & EMC (See Note 4) Safety Standards UL60950-1, TUV EN60950-1 Approved EMI Conduction and Radiation Compliance to EN55022 (CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,3 EMS Immunity Compliance to EN61000-4-2,3,4,5, light industry level, criteria A.
o
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797
PSPS25 Series
Single Output Up to 25 Watts AC/DC Power Supply
OUTPUT VOLTAGE / CURRENT RATING CHART
Model PSPS-25-3.3 PSPS-25-5 PSPS-25-7.5 PSPS-25-12 PSPS-25-13.5 PSPS-25-15 PSPS-25-24 PSPS-25-27 PSPS-25-48 85 ~ 264 VAC (120 ~ 370 VDC) Input Voltage Output Voltage 3.3 VDC 5 VDC 7.5 VDC 12 VDC 13.5 VDC 15 VDC 24 VDC 27 VDC 48 VDC Output Current Range 0 ~ 5A 0 ~ 5A 0 ~ 3.3A 0 ~ 2.1A 0 ~ 1.9A 0 ~ 1.7A 0 ~ 1A 0 ~ 0.9A 0 ~ 0.5A Ripple & Noise 80mVp-p 80mVp-p 80mVp-p 100mVp-p 100mVp-p 100mVp-p 240mVp-p 240mVp-p 350mVp-p Output Power 16.5W 25W 24.8W 25.2W 25.7W 25.5W 24W 24.3W 24W Over Voltage Protection 3.8 ~ 4.46V 5.75 ~ 6.75V 8.6 ~ 10.1V 13.8 ~ 16.2V 15.5 ~ 18.2V 17.3 ~ 20.3V 27.6 ~ 32.4V 31 ~ 36.5V 55.2 ~ 64.8V Efficiency 66% 74% 76% 78% 78% 78% 79% 79% 79%
NOTES
1. All parameters not specially mentioned are measured at 230VAC input, rated load, and 25C ambient temperature. 2. Ripple & noise are measured at 20MHz using a 12" twisted pair-wire terminated with 0.1uF & 47uF capacitors in parallel. 3. Tolerance: includes set up tolerance, line regulation, and load regulation. 4. The power supply is considered a component, which will be installed into final equipment. The final equipment must be reconfirmed that it still meets EMC directives.
BLOCK DIAGRAM
fosc: 100KHz
DERATING CURVE
STATIC CHARACTERISTICS (24V)
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797
PSPS25 Series
Single Output Up to 25 Watts AC/DC Power Supply
MECHANICAL DRAWING
Unit: mm
AC INPUT CONNECTOR (CN1) Pin. No Assignment 1 AC/L 2 No Pin 3 AC/N
DC OUTPUT CONNECTOR (CN2) Pin No. Assignment 1,2 +V 3,4 -V
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797


▲Up To Search▲   

 
Price & Availability of PSPS-25-12

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X