View PSPS-65-12_4229025.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PSPS65 Series
Single Output Up to 65 Watts AC/DC Power Supply
FEATURES
* 2 Year Warranty * 100% Full Load Burn-In Test * Universal AC Input/ Full Range * Low Leakage Current < 0.75mA * Cooling by Free Air Convection * Fixed Switching Frequency at 65KHz * Short Circuit, Overload, and Over Voltage Protected
SPECIFICATIONS: PSPS65 Series
All specifications are based on 25 C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. INPUT SPECIFICATIONS Input Voltage 90 - 264VAC (127 - 370VDC) Input Frequency 47 ~ 440Hz AC Current (typical) 1.2A @ 115VAC 0.72A @ 230VAC Inrush Current (typical) 20A @ 115VAC 40A @ 230VAC cold start Leakage Current < 0.75mA @ 240VAC OUTPUT SPECIFICATIONS Output Voltage See Table 3.3, 5, 7.5V outputs: 3.0%; Output Voltage Tolerance (See Note 3) 12, 13.5, 15, 24, 27, 48V outputs: 2.0% Voltage Adjustment Range See Table Output Power (max) Rated output power for convection; 72W (+3.3V: 50W; +5V: 69W) with 18CFM min. forced air. Line Regulation 1.0% 3.3, 5, 7.5V outputs: 3.0%; Load Regulation 12, 13.5, 15, 24, 27, 48V outputs: 2.0% Output Current See Table Ripple & Noise (max) (See Note 2) See Table Setup, Rise Time 800ms, 20ms at full load Hold Up Time 60ms at full load Temperature Coefficient 0.04%/C (0~50C) PROTECTION See Table Over Voltage Protection Protection Type: Hiccup mode, recovers automatically after fault condition is removed. 73 ~ 105W (3.3V: 51 ~ 75W) (5V: 70 ~ 105W) rated output power Overload Protection Protection Type: Hiccup mode, recovers automatically after fault condition is removed. GENERAL SPECIFICATIONS Switching Frequency (fixed) 65KHz Efficiency (typical) See Table Withstand Voltage 3KVAC (input to output), 1.5KVAC (input to FG), 0.5KVAC (output to FG). Isolation Resistance 100M / 500VDC (input to output, input to FG, output to FG) ENVIRONMENTAL SPECIFICATIONS Working Temperature -10C to +60C (refer to output load derating curve) Storage Temperature -20C to +85C Working Humidity (non-condensing) 20% ~ 90% RH non-condensing Storage Humidity (non-condensing) 10% ~ 95% RH Vibration 10~500Hz, 2G 10min./1cycle, Period for 60 minutes each along X, Y, and Z axes. Cooling Free air convection MTBF 300,700 hours min. MIL-HDBK-217 (25C) PHYSICAL SPECIFICATIONS Weight 18 oz. Dimensions 127(L) x 76(W) x 42(H) mm Warranty 2 years SAFETY & EMC (See Note 4) Safety Standards UL60950-1, TUV EN60950-1 Approved EMI Conduction and Radiation Compliance to EN55022 (CISPR22) Class B Harmonic Current Compliance to EN61000-3-2,3 EMS Immunity Compliance to EN61000-4-2,3,4,5, 6, 8, 11; EN50204, EN55024, Light industry level, criteria A.
o
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797
PSPS65 Series
Single Output Up to 65 Watts AC/DC Power Supply
OUTPUT VOLTAGE / CURRENT RATING CHART
Model PSPS-65-3.3 PSPS-65-5 PSPS-65-7.5 PSPS-65-12 PSPS-65-13.5 PSPS-65-15 PSPS-65-24 PSPS-65-27 PSPS-65-48 90 ~ 264VAC (127 ~ 370VDC) Input Voltage Output Voltage 3.3 VDC 5 VDC 7.5 VDC 12 VDC 13.5 VDC 15 VDC 24 VDC 27 VDC 48 VDC Voltage Adj. Range 3.14 ~ 3.63V 4.75 ~ 5.5V 7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.25 ~ 16.5V 22.8 ~ 26.4V 25.65 ~ 29.7V 45.6 ~ 52.8V Rated Current 12A 12A 8A 5.2A 4.7A 4.2A 2.7A 2.4A 1.35A Current Range 0 ~ 15.2A 0 ~ 13.8A 0 ~ 9.6A 0 ~ 6A 0 ~ 5.4A 0 ~ 4.8A 0 ~ 3A 0 ~ 2.7A 0 ~ 1.5A Ripple & Noise 80mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p 100mVp-p Output Power 39.6W 60W 60W 62.4W 63.5W 63W 64.8W 64.8W 64.8W Over Voltage Protection 3.8 ~ 4.46V 5.75 ~ 6.75V 8.63 ~ 10.1V 13.8 ~ 16.2V 15.5 ~ 18.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 31 ~ 36.45V 55.2 ~ 64.8V Efficiency 69% 76% 79% 79% 79% 79% 80% 80% 80%
NOTES
1. All parameters not specially mentioned are measured at 230VAC input, rated load, and 25C ambient temperature. 2. Ripple & noise are measured at 20MHz using a 12" twisted pair-wire terminated with 0.1uF & 47uF capacitors in parallel. 3. Tolerance: includes set up tolerance, line regulation, and load regulation. 4. The power supply is considered a component, which will be installed into final equipment. The final equipment must be reconfirmed that it still meets EMC directives. 5. Mounting holes M1 and M2 should be grounded for EMI purposes.
BLOCK DIAGRAM
fosc: 65KHz
DERATING CURVE
OUTPUT DERATING VS INPUT VOLTAGE
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797
PSPS65 Series
Single Output Up to 65 Watts AC/DC Power Supply
MECHANICAL DRAWING
Unit: mm
AC INPUT CONNECTOR (CN1) Pin. No Assignment 1 AC/N 2 AC/L
DC OUTPUT CONNECTOR (CN2) Pin. No Assignment 1,2,3 +V 4,5,6 -V
Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797

▲Up To Search▲

Price & Availability of PSPS-65-12

	To Download PSPS-65-12 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .