|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
3Northway Lane North Latham,New York 12110. Tollfree:1.800.984.5337 Phone:1.518.956.2980 Fax:1.518.785.4725 Http://www.marktechopto.com SPECIFICATION PART NO. : MTSM735K-UR-A 3.2 x 2.8mm SMD TYPE MTSM735K-UR-A Package Dimensions 3.2 x 2.8mm SMD TYPE 1.9 0.8 2.8 2.2 K 3.6 3.2 2.4 0.9 0.14 0.6 0.8 A Notes: 1. All dimensions are in mm. 2. Tolerance is 0.25mm unless otherwise noted. Description LED Chip Part No. Material AlGaAs/GaAs Emitting Color Super Red Lens Color MTSM735K-UR-A Water Clear VER.: 04 Date: 2007/11/04 Page: 1/6 MTSM735K-UR-A Absolute Maximum Ratings at Ta=25 Parameter Power Dissipation Reverse Voltage D.C. Forward Current Peak Current(1/10Duty Cycle,0.1ms Pulse Width.) Operating Temperature Range Storage Temperature Range Soldering Temperature 3.2 x 2.8mm SMD TYPE Symbol PD VR If If(Peak) Topr. Tstg. Tsld. Rating 66 4 30 100 -40 to +100 -40 to +100 Reflow Soldering: 260 Hand Soldering: 350 Unit mW V mA mA Electrical and Optical Characteristics: Parameter Luminous Intensity Forward Voltage Peak Wavelength Dominant Wavelength Reverse Current Viewing Angle Spectrum Line Halfwidth 2 Symbol IV Vf p d Ir 1/2 Condition If=20mA If=20mA If=20mA If=20mA Vr=4V If=20mA If=20mA Min. 35.0 Typ. 60.0 1.8 660 643 Max. Unit mcd 2.2 V nm nm 100 120 20 A deg nm Note: Customer's special requirements are also welcome . VER.: 04 Date: 2007/11/04 Page: 2/6 MTSM735K-UR-A Typical Electrical/Optical Characteristic Curves (25 3.2 x 2.8mm SMD TYPE Ambient Temperature Unless Otherwise Noted) 100.0 Relative Luminous Intensity(mcd) 80.0 60.0 40.0 20.0 0 50 40 30 20 10 Forward Current IF(mA) 1.2 1.6 2.0 2.4 2.8 3.2 0.0 Applied Voltage (V) 20.0 10.0 30.0 Forward Current (mA) Forward Current VS. Applied Voltage Forward Current VS. Luminous Intensity 50 40 30 20 10 0 10 20 30 Forward Current IF(mA) 40 1.0 0.9 0.8 50 60 70 80 90 0.5 0.3 0.1 0.2 0.4 0.6 0 40 60 80 100 ) 120 0.7 Ambient Temperature Ta ( Ambient Temperature VS. Forward Current VER.: 04 Radiation Diagram Date: 2007/11/04 Page: 3/6 MTSM735K-UR-A PRECAUTION IN USE Storage 3.2 x 2.8mm SMD TYPE Recommended storage environment Temperature: 5oC ~ 30oC (41oF ~ 86oF) Humidity: 60% RH Max. Use within 7 days after opening of sealed vapor/ESD barrier bags. If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the storage time, baking treatment should be performed using the following conditions. Baking treatment : 60 5 for 24 hours. Fold the opened bag firmly and keep in dry environment. Soldering Reflow Soldering Lead Solder Lead - free Solder 120~150 180~200 Pre-heat Pre-heat time 120sec. Max. 120sec. Max. 240 Max. 260 Max. Peak temperature Soldering time 10sec. Max. 10sec. Max. Condition refer to refer to TemperatureTemperatureprofile 1 profile 2 *After reflow soldering rapid cooling should be avoided. [Temperature-profile (Surface of circuit board)] Use the conditions shown to the under figure. 1 : Lead Solder 2.5~5C/sec. Pre-heating 120~150C 120sec. Max. 2.5~5C/sec. 240C Max. 10sec. Max. Hand Temperature Soldering time Soldering 350 Max. 3sec. Max. (one time only) 2 : Lead-free Solder 1~5C/sec. Pre-heating 180~200C 120sec. Max. 1~5C/sec. 260C Max. 10sec. Max. 60sec. Max. 60sec. Max. [ Recommended soldering pad design ] Use the following conditions shown in the figure. 2.2 1.4 1.8 1.4 (UNIT:mm) VER.: 04 Date: 2007/11/04 Page: 4/6 MTSM735K-UR-A Dimensions for Tape 3.2 x 2.8mm SMD TYPE 4.0 2.0 2.24 1.75 5.5 12.0 4.0 4.0 0.250.05 Dimensions for Reel 178.0 1 13.20.5 16.20.5 Notes: 1.All dimensions are in mm, tolerance is2.0mm unless otherwise noted. 2.Specifications are subject to change without notice. 60.00.5 57 VER.: 04 Date: 2007/11/04 Page: 5/6 MTSM735K-UR-A Packing REEL QUANTITY: 2,000 PCS Marktech Optoelectronics. PART NO :MTXXXX-XX Q'TY : PCS LOT NO :XXXXXXXXX DATE : BIN CODE: 3.2 x 2.8mm SMD TYPE Marktech Optoelectronics. PART NO :MTXXXX-XX Q'TY : PCS LOT NO :XXXXXXXXX DATE : BIN CODE: MOISTURE SENSITIVE DEVICES 1. 5 C~30 C 1 Shelf life in sealed bag : 12 months at 5C~30C . 2. 168 Devices have to be mounted within 168 hours after this bag is opened . 230 1.0 BAG QUANTITY: 2,000 PCS Marktech Optoelectronics. PART NO :MTXXXX-XX Q'TY : PCS LOT NO :XXXXXXXXX DATE : BIN CODE: 2701.0 INSIDE BOX QUANTITY: 4 BAGS TOTAL: 8,000 PCS 275 2 23 5 2 Q'TY : PCS LOT NO :XXXXXXXXX DATE : BIN CODE: Notes: 1.All dimensions are in mm, tolerance is2.0mm unless otherwise noted. 2.Specifications are subject to change without notice. VER.: 04 Date: 2007/11/04 Page: 6/6 752 Marktech Optoelectronics. PART NO :MTXXXX-XX 1781 2. ?}?E ?a?Y |b72? pRE? oI I!C RE SEN 1. |b5C ~30 SITI CK ? E?JA VE DEV ICES A!A2 |~|3 RA!C Marktech Optoele ctronics. PART NO :MTXX XX-XX Q'TY : PCS LOT NO :XXXX XXXXX DATE : BIN CODE: MOISTU |
Price & Availability of MTSM735K-UR-A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |