View SPLPL903_4250660.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Nanostack Impuls-Laserdiode im Plastikgehause 75 W Spitzenleistung Nanostack Pulsed Laser Diode in Plastic Package 75 W Peak Power Lead (Pb) Free Product - RoHS Compliant SPL PL90_3
Besondere Merkmale * Kostengunstiges Plastikgehause * Zuverlassiges InGaAs/GaAs kompressiv verspanntes Halbleiter-Material * Hochleistungslaser mit Large-Optical-Cavity" (LOC) Struktur fur ein schmales Fernfeld * Nanostack Lasertechnologie beinhaltet mehrere epitaktisch integrierte Emitter * Austrittsoffnung 200 m x 10 m Anwendungen * * * * Entfernungsmessung Sicherheit, Uberwachung Beleuchtung, Zundung Test- und Messsysteme
Features * Low cost plastic package * Reliable strained InGaAs/GaAs material * High power large-optical-cavity (LOC) structure for a narrow far-field * Nanostack laser technology including multiple epitaxially stacked emitters * Laser aperture 200 m x 10 m
Applications * * * * Range finding Security, surveillance Illumination, ignition Test and measurement systems
Sicherheitshinweise Je nach Betriebsart emittieren diese Bauteile hochkonzentrierte, nicht sichtbare InfrarotStrahlung, die gefahrlich fur das menschliche Auge sein kann. Produkte, die diese Bauteile enthalten, mussen gema den Sicherheitsrichtlinien der IEC-Norm 60825-1 behandelt werden.
Safety Advices Depending on the mode of operation, these devices emit highly concentrated non visible infrared light which can be hazardous to the human eye. Products which incorporate these devices have to follow the safety precautions given in IEC 60825-1 "Safety of laser products"
Typ Type SPL PL90_3
Opt. Spitzenausgangsleistung Number of Emitters Opt. Peak Power 3 75 W
Emitteranzahl
Wellenlange Wavelength 905 nm
Bestellnummer Ordering Code Q62702P5353
2007-04-04
1
SPL PL90_3
Grenzwerte (kurzzeitiger Betrieb) (TA = 25 C) Maximum Ratings (short time operation) Parameter Parameter Spitzenausgangsleistung Peak output power Spitzendurchlastrom Peak forward current Pulsbreite (Halbwertsbreite) Pulse width (FWHM) Tastverhaltnis Duty cycle Sperrspannung Reverse voltage Betriebstemperatur Operating temperature Lagertemperatur Storage temperature Lottemperatur (tmax = 10 s, 2 mm von Gehauseunterseite) Soldering temperature (tmax = 10 s, 2 mm from bottom edge of case) Symbol Symbol min. Werte Values max. 90 40 100 0.1 3 + 85 + 100 + 260 W A ns % V C C C - - - - - - 40 - 40 - Einheit Unit
Ppeak IF tp
d.c.
VR Top Tstg Ts
2007-04-04
2
SPL PL90_3
Optische Kennwerte (TA = 25 C) Optical Characteristics Parameter Parameter Zentrale Emissionswellenlange1) Emission wavelength1) Spektralbreite (Halbwertsbreite)1) Spectral width (FWHM)1) Spitzenausgangsleistung1) Peak output power1) Schwellstrom Threshold current Betriebsspannung1) Operating voltage1) Minimale Anstiegs- und Abfallzeit (10% ...90%) Minimum rise and fall time (10% ... 90%) Austrittsoffnung Aperture size Strahldivergenz (Halbwertsbreite) Beam divergence (FWHM) Temperaturkoeffizient der Wellenlange Temperature coefficient of wavelength Temperaturkoeffizient der opt. Ausgangsleistung Temperature coefficient of optical power Thermischer Widerstand Thermal resistance
1)
Symbol Symbol min. peak 895 - 65 0.5 8 -
Werte Values typ. 905 7 75 0.75 9 1 max. 915 - 85 1.0 11 -
Einheit Unit nm nm W A V ns
Pop Ith Vop tr , tf
wxh
|| x / T Pop/PopT
- - - -
200 x 10 11 x 25 0.28 -0.4
- - - -
m Grad deg. nm/K %/K
Rth JS
-
160
-
K/W
Standardbetriebsbedingungen beziehen sich auf eine Pulsbreite von 100 ns bei einer Frequenz von 1 kHz und einem Betriebsstrom von 30 A bei TA = 25 C. Standard operating conditions refer to pulses of 100 ns pulse width at 1 kHz rate with 30 A operating current at TA = 25 C.
2007-04-04
3
SPL PL90_3
Optical output power Popt and forward voltage VF vs. forward current IF (TA = 25 C)
12 V 10
OHF00564
Optical spectrum, relative intensity Irel vs. wavelength (TA = 25 C, Popt = 75 W)
1.00
OHF00565
VF
120 WP 100
opt
rel
0.75
8
80
6
60
0.50
4
40
0.25
2
20
0
0
10
20
30
0 40 A 50
0
880 890
900
910
nm
930
IF
Far-field distribution parallel to junction Irel vs. || (TA = 25 C, Popt = 75 W)
1.00
OHL00755
Far-field distribution perpendicular to junction Irel vs. (TA = 25 C, Popt = 75 W)
1.00
OHL00756
Irel
0.75
Irel
0.75
0.50
0.50
0.25
0.25
0 -30
-20
-10
0
10
Deg 30
0 -40 -30 -20 -10 0
10 20 Deg 40
2007-04-04
4
SPL PL90_3
Mazeichnung Package Outlines
Chip position Cathode Area not flat
0.6 (0.024) 0.4 (0.016) 0.8 (0.031) 0.4 (0.016)
2.54 (0.100) mm spacing
X
Bottom view 5.9 (0.232) 5.5 (0.217) Y
1.8 (0.071) 1.2 (0.047) 29.0 (1.142) 27.0 (1.063)
5.0 (0.197) 4.2 (0.165)
0.6 (0.024) 0.4 (0.016)
Detail X
0.1 (0.004) ... 0.7 (0.028)
Detail Y
5.1 (0.201)
Chip position
o0.3 A A
GEOY6066
5
5 3.5 (0.138) 3.7 (0.146)
Mae in mm (inch) / Dimensions in mm (inch).
2007-04-04
5
1.7 (0.067) 1.9 (0.075)
4.8 (0.189)
SPL PL90_3
Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg www.osram-os.com (c) All Rights Reserved. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 , may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component usedin a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered.
2007-04-04
6

▲Up To Search▲

Price & Availability of SPLPL903

	To Download SPLPL903 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .