|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MDRC Vishay Dale Resistor/Capacitor Networks, Dual-In-Line, Molded DIP, 16 Pin FEATURES * * * * * 0.190" [4.83 mm] maximum seated height Rugged molded case construction Thick film resistive elements Reduces total assembly cost Low temperature coefficient (- 30 C to + 85 C) 100 ppm/C * Compatible with automatic insertion equipment * Reduces PC board space * Lead (Pb)-free version is RoHS compliant Available e1 RoHS* COMPLIANT STANDARD ELECTRICAL SPECIFICATIONS GLOBAL SCHEMATIC MODEL POWER RATING P25 C W 0.15 max 0.15 max 0.20 max RESISTOR CHARACTERISTICS TEMPERATURE PACKAGE TCR RESISTANCE COEFFICIENT POWER TRACKING TOLERANCE (- 20 C to + 85 C) RATING ppm/C % Typical W at + 25 C 2.0 max. 2.0 max. 2.0 max. 2, or 2 * 2, or 2 * 2, or 2 * 100 ppm/C 100 ppm/C 100 ppm/C 50 50 50 CAPACITOR CHARACTERISTICS CAPACITOR TOLERANCE 0.1 F + 40 %, - 20 % 0.1 F + 40 %, - 20 % 0.1 F + 40 %, - 20 % CAPACITANCE VOLTAGE RATING V max. 25 25 25 MDRC MDRC MDRC 1641 1642 1643 * Whichever is greater GLOBAL PART NUMBER INFORMATION New Global Part Numbering: MDRC1641500GD04 (preferred part numbering format) M GLOBAL MODEL MDRC D R C 1 6 4 1 5 0 0 G D 0 4 SPECIAL Blank = Standard (Dash Number) (up to 3 digits) RESISTANCE TOLERANCE VALUE CODE 41 = ECL Terminator 2 digit G=2% 42 = ECL Pull-Down significant figure, S = Special 00 = Special followed by a multiplier 680 = 68 511 = 510 Historical Part Number example: MDRC1641500G (will continue to be accepted) PIN COUNT 16 = 16 Pin SCHEMATIC PACKAGING E04 = Lead (Pb)-free, Tube D04 = Tin/lead, Tube MDRC HISTORICAL MODEL 16 PIN COUNT 41 SCHEMATIC 500 RESISTANCE VALUE G TOLERANCE CODE D04 PACKAGING New Global Part Numbering: MDRC1643750GD04 (preferred part numbering format) M GLOBAL MODEL MDRC D R C 1 6 4 3 7 5 0 G D 0 4 SPECIAL Blank = Standard (Dash Number) (up to 3 digits) PIN COUNT 16 = 16 Pin SCHEMATIC 43 = Thevenin Terminator IMPEDENCE VALUE 2 digit significant figure, followed by a multiplier 500 = 50 TOLERANCE CODE G=2% J=5% PACKAGING E04 = Lead (Pb)-free, Tube D04 = Tin/lead, Tube Historical Part Number example: MDRC1643750G (will continue to be accepted) MDRC HISTORICAL MODEL 16 PIN COUNT 43 SCHEMATIC 750 IMPEDENCE VALUE G TOLERANCE CODE D04 PACKAGING * Pb containing terminations are not RoHS compliant, exemptions may apply www.vishay.com 62 For technical questions, contact: ff2aresistors@vishay.com Document Number: 31524 Revision: 09-Jan-07 MDRC Resistor/Capacitor Networks, Dual-In-Line, Molded DIP, 16 Pin DIMENSIONS in inches [millimeters] 0.850 0.010 [21.59 0.254] 0.150 0.005 [3.81 0.127] 0.030 [0.762] Typ. Vishay Dale 0.310 0.010 [7.87 0.254] 0.250 0.005 [6.35 0.127] Pin #1 Identification Pin #1 0.075 0.015 [1.90 0.381] 0.100 0.010 [2.54 0.254] Non-Accumulative Tol. 7 Spaces 0.018 0.003 [0.457 0.076] 0.130 + 0.015 - 0.010 [3.30 + 0.381 - 0.254] 0.010 + 0.005 - 0.002 [0.254 + 0.127 - 0.051] 0.290 [7.37] Min. 0.320 [8.13] Nom. 0.360 [9.14] Max. 0.700 0.010 [17.78 0.254] 0.050 0.005 [1.27 0.127] RESISTANCE VALUE IN OHMS (G TOLERANCE) MDRC1643 MDRC1641 50, 68, 75, 100 R1 81 121 162 R2 130 195 260 Zo 50 75 100 MDRC1642 510 TECHNICAL SPECIFICATIONS PARAMETER Operating Voltage (at + 25 C) Capacitor Dissipation Factor Voltage Coefficient of Resistance (typical) Operating Temperature Range Storage Temperature Range UNIT VAC % ppm/V C C MDRC 50 maximum <3 < 50 - 30 to + 85 C - 30 to + 85 C MECHANICAL SPECIFICATIONS Marking Resistance to Solvents Solderability Terminals Body Weight Permanency testing per MIL-STD-202, Method 215 Per MIL-STD-202, Method 208E Copper alloy, solder plated Molded epoxy 1.5 grams Document Number: 31524 Revision: 09-Jan-07 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 63 MDRC Vishay Dale CIRCUIT APPLICATIONS MDRC1641 Schematic - 2.0 and - 5.2 Volt ECL Terminator 16 9 Resistor/Capacitor Networks, Dual-In-Line, Molded DIP, 16 Pin 1 8 The MDRC1641 circuit contains 11 resistors of nominally equal value and a 0.01 microfarad decoupling capacitor. The MDRC-1641 is designed for ECL Line Termination to a - 2.0 volt buss. The 0.01 microfarad decoupling capacitor is for bypassing transients between supply voltages. MDRC1642 Schematic 16 9 1 8 The MDRC1642 circuit contains 12 resistors of 510 ohm each and a 0.01 microfarad decoupling capacitor. The MDRC-1642 is designed for ECL Pull-down to a - 5.2 volt buss. The 0.01 microfarad decoupling capacitor is for bypassing voltage transients on the voltage buss. MDRC1641 Schematic VCC 16 R1 R2 R1 R2 R1 R2 R1 R2 C LINE 1 VEE LINE 2 LINE 3 VCC LINE 2 VEE Thevenin Equivalent Terminator The MDRC1643 contains four pair of series resistors. The circuit is compatible with ECL pin configurations. Each terminator section (series pair) contains a voltage divider between VCC (0 volt) and VEE (- 5.2 volt) providing a Thevenin equivalent voltage of - 2.0 volts. A 0.01 microfarad decoupling capacitor bypasses the VEE buss. 1 VCC VEE VCC VEE VEE VCC VEE VEE MDRC1641 and MDRC1642 Power Rating (Watts) 2.00 MDRC1641 MDRC1642 Package 1.00 0.15 Single Resistor + 25 + 85 + 150 - 50 - 30 Derating Ambient Temperature C MDRC1643 Power Rating (Watts) MDRC1643 Package 2.00 1.00 0.20 - 50 - 30 Single Resistor + 25 + 85 + 150 Derating www.vishay.com 64 Ambient Temperature C For technical questions, contact: ff2aresistors@vishay.com Document Number: 31524 Revision: 09-Jan-07 MDRC Resistor/Capacitor Networks, Dual-In-Line, Molded DIP, 16 Pin Vishay Dale PERFORMANCE TEST Thermal Shock Short Time Overload Low Temperature Operation Moisture Resistance Resistance to Soldering Heat Shock Vibration Load Life Terminal Strength Insulation Resistance Dielectric Withstanding Voltage CONDITIONS MDRC1641 and MDRC1642, 5 cycles between - 30 C and + 85 C MDRC1643, 5 cycles between - 65 C and + 125 C 2.5 x rated working voltage 5 seconds MDRC1641 and MDRC1642, 45 minutes at full rated working voltage at - 30 C MDRC1643, 45 minutes at full rated working voltage at - 65 C 240 hours with humidity ranging from 80 % RH to 98 % RH Leads immersed in + 350 C solder to within 1/16" of device body for 3 seconds Total of 18 shocks at 100 G's 12 hours at maximum of 20 G's between 10 and 2000 Hz 1000 hours at + 70 C, rated power applied 1.5 hours "ON", 0.5 hour "OFF" for full 1000 hour period. Derated according to the curve. 4.5 pound pull for 30 seconds 10 000 Megohm (minimum) (200 VRMS for 1 minute) MAX R (Typical Test Lots) 0.50 % R 0.25 % R 0.25 % R 0.50 % R 0.25 % R 0.25 % R 0.25 % R 0.50 % R 0.25 % R - Document Number: 31524 Revision: 09-Jan-07 For technical questions, contact: ff2aresistors@vishay.com www.vishay.com 65 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of MDRC1600680GD04 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |