|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
STD90N4F3 - STI90N4F3 STP90N4F3 - STU90N4F3 N-channel 40 V, 5.4 m, 80 A, DPAK, TO-220, IPAK, I2PAK STripFETTM Power MOSFET Features Type STD90N4F3 STI90N4F3 STP90N4F3 STU90N4F3 VDSS 40 V 40 V 40 V 40 V RDS(on) max < 6.5 m < 6.5 m < 6.5 m < 6.5 m ID 80 A 80 A 80 A 80 A Pw 1 3 3 2 1 110 W 110 W 110 W 110 W DPAK IPAK Standard threshold drive 100% avalanche tested 1 2 3 3 12 Application TO-220 IPAK Switching applications Figure 1. Internal schematic diagram Description This n-channel enhancement mode Power MOSFET is the latest refinement of STMicroelectronics unique "single feature size" strip-based process with less critical alignment steps and therefore a remarkable manufacturing reproducibility. The resulting transistor shows extremely high packing density for low onresistance, rugged avalanche characteristics and low gate charge. Table 1. Device summary Marking 90N4F3 90N4F3 90N4F3 90N4F3 Package DPAK IPAK TO-220 IPAK Packaging Tape & reel Tube Tube Tube Order codes STD90N4F3 STI90N4F3 STP90N4F3 STU90N4F3 July 2008 Rev 2 1/16 www.st.com 16 Contents STD90N4F3 - STI90N4F3 - STP90N4F3 - STU90N4F3 Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................. 6 3 4 5 6 Test circuit ................................................ 8 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 2/16 STD90N4F3 - STI90N4F3 - STP90N4F3 - STU90N4F3 Electrical ratings 1 Electrical ratings Table 2. Symbol VDS VGS ID (1) ID IDM (2) PTOT Absolute maximum ratings Parameter Drain-source voltage (VGS=0) Gate-source voltage Drain current (continuous) at TC = 25 C Drain current (continuous) at TC = 100 C Drain current (pulsed) Total dissipation at TC = 25 C Derating factor Value 40 20 80 65 320 110 0.73 8 400 -55 to 175 Unit V V A A A W W/C V/ns mJ C dv/dt (3) EAS (4) Tj Tstg Peak diode recovery voltage slope Single pulse avalanche energy Operating junction temperature Storage temperature 1. Current limited by package 2. Pulse width limited by safe operating area 3. ISD 80 A, di/dt 400A/s, VDS V(BR)DSS, Tj Tjmax 4. Starting Tj = 25C, ID = 40A, VDD = 30V Table 3. Thermal resistance Value Symbol Parameter TO-220 IPAK Unit IPAK 1.36 DPAK C/W -50 -C/W C/W C Rthj-case Rthj-a Thermal resistance junction-case max Thermal resistance junction-ambient max 62.5 -300 100 -275 Rthj-pcb (1) Thermal resistance junction-ambient max Tl Maximum lead temperature for soldering purpose 1. When mounted on 1inch FR-4 2Oz Cu board 3/16 Electrical characteristics STD90N4F3 - STI90N4F3 - STP90N4F3 - STU90N4F3 2 Electrical characteristics (TCASE = 25 C unless otherwise specified) Table 4. Symbol V(BR)DSS IDSS IGSS VGS(th) RDS(on) Static Parameter Drain-source breakdown voltage Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 250 A, VGS= 0 VDS = Max rating, VDS = Max rating,Tc = 125C VGS = 20 V VDS= VGS, ID = 250 A VGS= 10 V, ID= 40 A 2 5.4 Min. Typ. Max. Unit 40 10 100 200 V A A nA V m 4 6.5 Table 5. Symbol gfs (1) Ciss Coss Crss Qg Qgs Qgd Dynamic Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Total gate charge Gate-source charge Gate-drain charge Test conditions VDS =25 V, ID=40 A Min Typ. Max. Unit 100 2200 580 40 40 11 8 54 S pF pF pF nC nC nC VDS =25 V, f=1 MHz, VGS=0 VDD=20 V, ID = 80 A VGS =10 V (see Figure 14) 1. Pulsed: pulse duration = 300s, duty cycle 1.5% 4/16 STD90N4F3 - STI90N4F3 - STP90N4F3 - STU90N4F3 Electrical characteristics Table 6. Symbol td(on) tr td(off) tf Switching on/off (inductive load) Parameter Turn-on delay time Rise time Test conditions VDD=20 V, ID= 40 A, RG=4.7 , VGS=10 V (see Figure 16) VDD=20 V, ID= 40 A, RG=4.7 , VGS=10 V (see Figure 16) Min. Typ. 15 50 Max. Unit ns ns Turn-off delay time Fall time 40 15 ns ns Table 7. Symbol ISD ISDM (1) Source drain diode Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current ISD=80 A, VGS=0 ISD=80 A, di/dt = 100 A/s, VDD=30 V, Tj=150C (see Figure 15) 45 60 2.8 Test conditions Min. Typ. Max. 80 320 1.5 Unit A A V ns nC A VSD (2) trr Qrr IRRM 1. Pulse width limited by safe operating area 2. Pulsed: pulse duration = 300 s, duty cycle 1.5% 5/16 Electrical characteristics STD90N4F3 - STI90N4F3 - STP90N4F3 - STU90N4F3 2.1 Figure 2. Electrical characteristics (curves) Safe operating area Figure 3. Thermal impedance Figure 4. Output characteristics Figure 5. Transfer characteristics Figure 6. Static drain-source on resistance Figure 7. Normalized BVDSS vs temperature 6/16 STD90N4F3 - STI90N4F3 - STP90N4F3 - STU90N4F3 Figure 8. Gate charge vs gate-source voltage Figure 9. Electrical characteristics Capacitance variations Figure 10. Normalized gate threshold voltage vs temperature Figure 11. Normalized on resistance vs temperature Figure 12. Source-drain diode forward characteristics 7/16 Test circuit STD90N4F3 - STI90N4F3 - STP90N4F3 - STU90N4F3 3 Test circuit Figure 14. Gate charge test circuit Figure 13. Switching times test circuit for resistive load Figure 15. Test circuit for inductive load Figure 16. Unclamped Inductive load test switching and diode recovery times circuit Figure 17. Unclamped inductive waveform Figure 18. Switching time waveform 8/16 STD90N4F3 - STI90N4F3 - STP90N4F3 - STU90N4F3 Package mechanical data 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 9/16 Package mechanical data STD90N4F3 - STI90N4F3 - STP90N4F3 - STU90N4F3 TO-220 mechanical data mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.48 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6 inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116 10/16 STD90N4F3 - STI90N4F3 - STP90N4F3 - STU90N4F3 Package mechanical data TO-251 (IPAK) mechanical data mm. DIM. A A1 b b2 b4 c c2 D E e e1 H L (L1) L2 V1 9.00 0.80 0.80 10 o 4.40 16.10 9.40 1.20 5.20 0.45 0.48 6.00 6.40 2.28 4.60 min. 2.20 0.90 0.64 typ max. 2.40 1.10 0.90 0.95 5.40 0.60 0.60 6.20 6.60 0068771_H 11/16 Package mechanical data STD90N4F3 - STI90N4F3 - STP90N4F3 - STU90N4F3 TO-252 (DPAK) mechanical data DIM. A A1 A2 b b4 c c2 D D1 E E1 e e1 H L L1 L2 L4 R V2 0o 0.60 0.20 8o 4.40 9.35 1 2.80 0.80 1 6.40 4.70 2.28 4.60 10.10 mm. min. 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 5.10 6.60 typ max. 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 0068772_G 12/16 STD90N4F3 - STI90N4F3 - STP90N4F3 - STU90N4F3 Package mechanical data IPAK (TO-262) mechanical data mm Dim Min A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 Typ Max 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 Min 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 inch Typ Max 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 13/16 Packaging mechanical data STD90N4F3 - STI90N4F3 - STP90N4F3 - STU90N4F3 5 Packaging mechanical data DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 16.4 50 22.4 18.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0.795 0.645 0.724 1.968 0.881 BULK QTY 2500 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 B1 D D1 E F K0 P0 P1 P2 R W BASE QTY 2500 mm MIN. 6.8 10.4 1.5 1.5 1.65 7.4 2.55 3.9 7.9 1.9 40 15.7 16.3 inch MIN. MAX. 7 0.267 0.275 0.409 0.417 0.476 0.059 0.063 0.059 0.065 0.073 0.291 0.299 0.100 0.108 0.153 0.161 0.311 0.319 0.075 0.082 1.574 0.618 0.641 MAX. 10.6 12.1 1.6 1.85 7.6 2.75 4.1 8.1 2.1 14/16 STD90N4F3 - STI90N4F3 - STP90N4F3 - STU90N4F3 Revision history 6 Revision history Table 8. Date 29-Nov-2007 15-Jul-2008 Document revision history Revision 1 2 First release Added new package, mechanical data: IPAK Changes 15/16 STD90N4F3 - STI90N4F3 - STP90N4F3 - STU90N4F3 Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 16/16 |
Price & Availability of STI90N4F3 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |