 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 1000W Single Output with PFC Function Features : PSP-1000 series Universal AC input / Full range AC input active surge current limiting Built-in active PFC function Protections: Short circuit / Overload / Over voltage / Over temperature Built-in constant current limiting circuit Current sharing up to 2 units or 2000W Built-in remote ON-OFF control Built-in remote sense function Built-in active current sharing and parallel function 3 years warranty SPECIFICATION MODEL DC VOLTAGE RATED CURRENT CURRENT RANGE RATED POWER PEAK LOAD OUTPUT VOLTAGE ADJ. RANGE VOLTAGE TOLERANCE Note.3 LINE REGULATION LOAD REGULATION SETUP, RISE TIME HOLD UP TIME (Typ.) VOLTAGE RANGE FREQUENCY RANGE POWER FACTOR (Typ.) INPUT EFFICIENCY (Typ.) AC CURRENT (Typ.) INRUSH CURRENT (Typ.) LEAKAGE CURRENT OVERLOAD PROTECTION OVER VOLTAGE OVER TEMPERATURE FUNCTION REMOTE CONTROL WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION SAFETY STANDARDS WITHSTAND VOLTAGE SAFETY & EMC (Note 5) PSP-1000-5 5V 145A 0 ~ 145A 725W Note.4 800W PSP-1000-12 12V 75A 0 ~ 75A 900W 1000W 150mVp-p 10 ~ 13.2V 3.0% 0.3% 0.5% PSP-1000-13.5 13.5V 67A 0 ~ 67A 904.5W 1000W 150mVp-p 12 ~ 15V 2.0% 0.3% 0.5% PSP-1000-15 15V 60A 0 ~ 60A 900W 1000W 150mVp-p 13.5 ~ 18V 2.0% 0.3% 0.5% PSP-1000-24 24V 37.6A 0 ~ 37.6A 902.4W 1000W 150mVp-p 20 ~ 26.4V 1.0% 0.2% 0.5% PSP-1000-27 27V 33.6A 0 ~ 33.6A 907.2W 1000W 150mVp-p 24 ~ 30V 1.0% 0.2% 0.5% PSP-1000-48 48V 19A 0 ~ 19A 912W 1000W 200mVp-p 41 ~ 56V 1.0% 0.2% 0.5% RIPPLE & NOISE (max.) Note.2 100mVp-p 4.75 ~ 5.5V 6.0% 0.5% 2.0% 24ms/230VAC Note.6 90 ~ 264VAC 1500ms, 50ms/230VAC 1500ms, 50ms/115VAC at full load 24ms/115VAC at full load 127 ~ 370VDC 0.96/115VAC at full load 84% 5.6A/230VAC 63A/230VAC 84% 84% 85% 86% 86% 47 ~ 63Hz 0.96/230VAC 77% 11.2A/115AVC 32A/115VAC <2mA / 240VAC 115 ~ 140% rated output power Protection type : Constant current limiting, recovers automatically after fault condition is removed 5.75 ~ 6.75V 13.8 ~ 16.2V 15.5 ~ 18.2V 18 ~ 21V 27.6 ~ 32.4V 31 ~ 36.5V 57.6 ~ 67.2V Protection type : Shut down o/p voltage, re-power on to recover 95 (TSW1) detect on the heatsink of PFC MOSFET 90 (TSW2) detect the winding of output choke Protection type : Shut down o/p voltage, recovers automatically after temperature goes down RC+/RC-: 0 ~ 0.8V=power on ; 4 ~ 10V=power off -10 ~ +60 (Refer to output load derating curve) 20 ~ 90% RH non-condensing -20 ~ +85 0.03%/ , 10 ~ 95% RH (0 ~ 50 sink current <20mA 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1 approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC ISOLATION RESISTANCE HARMONIC CURRENT EMS IMMUNITY MTBF I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC EMI CONDUCTION & RADIATION Compliance to EN55022 (CISPR22) Class B Compliance to EN61000-3-2,-3 Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, light industry level, criteria A 59.6K hrs min. MIL-HDBK-217F (25 278*129*127mm (L*W*H) 5.2Kg; 3pcs/16.3Kg/1.42CUFT ) OTHERS NOTE DIMENSION PACKING 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. 10% Duty cycle maximum within every 30 seconds(max.). Average output power should not exceed the rated power. 5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. 6. Derating may be needed under low input voltages. Please check the derating curve for more details. File Name:PSP-1000-SPEC 2008-06-30 1000W Single Output with PFC Function Mechanical Specification PSP-1000 Case No. 924A series Unit:mm 63.5 52 18 max. 4-M4 31.75 200 23 max. CONTROL ADJ LED 4 3 2 1 8 7 6 5 113 83 2 4 6-M3 129 39 O/P 4-M6 1 3 8 47.5 Air flow direction 32 185 38 240 25.75 63.5 127 10 127 7 63.5 52 3 2 1 I/P 4-M4 31.75 200 278 AC Input Terminal Pin No. Assignment Pin No. 1 2 3 Assignment AC/L AC/N FG DC Output Terminal Pin No. Assignment Pin No. 1,3 2,4 Assignment DC OUTPUT +V DC OUTPUT -V Control Pin No. Assignment : MOLEX 5559-NP uses 5558male crimp terminal Pin No. Assignment Pin No. 1 5 P(Current share) -S 2 6 G 3 7 RC4 8 Assignment Mating connector Terminal NC MOLEX 5556 NC MOLEX 5557-NR Female crimp Terminal +S receptacle RC+ P +S G -S RC+ RC- Block Diagram AC/L AC/N FG PSP-500 +V PSP-500 -V Derating Curve Output Derating VS Input Voltage 100 12 ~ 48V 100 90 80 80 60 5V 70 LOAD (%) 40 LOAD(%) 0 10 20 30 40 50 60 70 (HORIZONTAL) 60 50 40 20 -10 90 115 135 180 230 264 AMBIENT TEMPERATURE ( ) INPUT VOLTAGE (V) 60Hz File Name:PSP-1000-SPEC 2008-06-30 |
Price & Availability of PSP-1000
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |