Part Number Hot Search : 
2SK23 MD90FF25 6AGPA P1214 1N5732D XC61C LM290 RS4937
Product Description
Full Text Search
 

To Download KWL-1001U2 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 KWL-1001Ux SERIES
Light Bar Graph Array Display
DESCRIPTION:
The KWL-1001Ux series is 10.10mm x 25.40mm ten-element bar graph display. The device has separete anode and cathode for each light segment and is available in 6 different colors.
1.74(0.069) 2.54*9=22.86(0.9) PIN 1 25.40(1.0)
PACKAGE DIMENSIONS
A B C D E F G H I J
ABSOLUTE MAXIMUM RATINGS: (Ta=25 C)
Parameter Max Reverse Voltage per segment 5V Reverse Current per segment (Vr = 5V) 100A Derating Linear from 25oC per segment 0.4mA/ oC Operating Temperature Range -40oC To 85oC Storage Temperature Range -40oC To 100oC Soldering Temperature 1.6mm(1/16") from body for 5 sec. at 260oC
NOTES : 1. All dimensions are in millimeters (inches). 2. Tolerance is +0.25mm(0.010) unless otherwise specified. 3. Specifications are subject to change without notice. 4. NP: No Pin. 5. NC: No Connect.
20 19 18
o
5.0(0.197) 10.10(0.398) 8.0(0.315) 0.50(0.020) 6.30(0.248) 2.54*9=22.86(0.9) 7.62(0.3)
INTERNAL CIRCUIT DIAGRAM
17
16
15
14
13
12
11
TESTING CONDITION FOR EACH PARAMETER :
Parameter Forward Voltage Peak Emission Wave Length Spectral Line Half-Width Reverse Current Average Luminous Intensity Symbol Vf Ir Iv Unit V nm nm A cd Test Condition If=20mA If=20mA If=20mA Vr=5V If=10mA
1
A 2
B
C 3 4
D 5
E 6
F 7
G 8
H 9
I
J 10
PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT)
Chip Part No. Raw Material GaP GaAsP/GaP GaAlAs GaP GaP GaAsP/GaP Emitted Color Bright Red Hi-Eff. Red Super Red Green Super Green Yellow No Common Polar C.C or C.A Wave Length (nm) 700 635 660 565 570 585 Absolute Maximum Ratings Pd If Electro-optical Characteristic
o
If If Vf (V) Iv (cd) (Peak) (Rec) Per Chip Per Chip (nm) (mW) (mA) (mA) Min. Typ. Max. mA Min. Typ. 90 45 20 30 30 30 100 100 100 100 100 100 50 50 50 50 50 50 100 100 100 100 100 100 1.7 1.7 1.5 1.7 1.7 1.7 2.4 1.9 1.9 2.2 2.2 1.9 2.8 10-20 300 2.6 10-20 700 550 1800
KWL-1001U5 KWL-1001U3 KWL-1001US KWL-1001U2 KWL-1001UG KWL-1001U6
2.6 10-20 1500 5000 2.6 10-20 700 2.6 10-20 850 2.6 10-20 600 1600 1900 1500
REMARKS : 1. The average luminous intensity is obtained by summing the luminous intensity of each segment and dividing by the total number of segments. 2. Luminous intensity is measured with a light sensor and filter combination that approximates the CIE (International Commission on Illumination) eye-response curve. 3. Clean only by pure water, isopropanol, ethanol, Freon TF (or equivalent).


▲Up To Search▲   

 
Price & Availability of KWL-1001U2

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X