![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
FCSP07H40TR Vishay High Power Products FlipKY(R) Chip Scale Package Schottky Barrier Rectifier, 0.75 A FEATURES * Ultra low VF to footprint area * Very low profile (< 0.6 mm) * Low thermal resistance * Supplied tested and on tape and reel RoHS COMPLIANT APPLICATIONS * Reverse polarity protection * Current steering * Freewheeling FlipKY(R) * Flyback * Oring DESCRIPTION Vishay's FlipKY(R) product family utilizes wafer level chip scale packaging to deliver Schottky diodes with the lowest VF to PCB footprint area in industry. The three pad 0.9 mm x 1.2 mm devices can deliver up to 0.75 A and occupy only 1.08 mm2 of board space. The anode and cathode connections are made through solder bump pads on one side of the silicon enabling designers to strategically place the diodes on the PCB. This design not only minimizes board space but also reduces thermal resistance and inductance, which can improve overall circuit efficiency. Typical applications include hand-held, portable equipment such as cell phones, MP3 players, bluetooth, GPS, PDAs, and portable hard disk drives where space savings and performance are crucial. PRODUCT SUMMARY IF(AV) VR 0.75 A 40 V MAJOR RATINGS AND CHARACTERISTICS SYMBOL VRRM IF(AV) IFSM VF TJ 0.75 Apk, TJ = 125 C Rectangular waveform CHARACTERISTICS MAX. 40 0.75 190 0.47 - 55 to 150 UNITS V A V C VOLTAGE RATINGS PARAMETER Maximum DC reverse voltage Maximum working peak reverse voltage SYMBOL VR VRWM FCSP07H40TR 40 UNITS V Document Number: 94561 Revision: 18-Apr-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 1 FCSP07H40TR Vishay High Power Products FlipKY(R) Chip Scale Package Schottky Barrier Rectifier, 0.75 A TEST CONDITIONS 50 % duty cycle at TPCB = 106 C, rectangular waveform 5 s sine or 3 s rect. pulse IFSM 10 ms sine or 6 ms rect. pulse EAS IAR Following any rated load condition and with rated VRRM applied VALUES 0.75 190 10 5 0.5 mJ A A UNITS ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current Maximum peak one cycle non-repetitive surge current at 25 C Non-repetitive avalanche energy Repetitive avalanche current SYMBOL IF(AV) TJ = 25 C, IAS = 2.0 A, L = 5.0 mH Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL 0.75 A Maximum forward voltage drop See fig. 1 VFM (1) 1.5 A 0.75 A 1.5 A TEST CONDITIONS TJ = 25 C TJ = 125 C VR = Rated VR TJ = 25 C Maximum reverse leakage current See fig. 2 IRM (1) VR = 20 V VR = 10 V VR = 5 V VR = Rated VR TJ = 125 C VR = 20 V VR = 10 V VR = 5 V Maximum junction capacitance Maximum voltage rate of charge Note (1) Pulse width < 300 s, duty cycle < 2 % CT dV/dt VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 C Rated VR TYP. 0.51 0.59 0.42 0.52 1 0.2 0.08 0.05 0.7 0.2 0.15 0.125 MAX. 0.55 0.64 0.47 0.57 10 0.5 0.25 0.15 3 1 0.8 0.5 90 10 000 pF V/s mA A V UNITS THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range Typical thermal resistance, junction to PCB Maximum thermal resistance, junction to ambient Notes (1) (2) SYMBOL TJ (1), TStg RthJL (2) RthJA DC operation TEST CONDITIONS VALUES - 55 to 150 35 UNITS C C/W 150 dP tot 1 ------------ < ------------- thermal runaway condition for a diode on its own heatsink dT J R thJA Mounted on minimum footprint PCB www.vishay.com 2 For technical questions, contact: diodes-tech@vishay.com Document Number: 94561 Revision: 18-Apr-08 FCSP07H40TR FlipKY(R) Vishay High Power Products Chip Scale Package Schottky Barrier Rectifier, 0.75 A 10 Junction Capacitance - C T (p F) 1000 T = 25C J 100 Instantaneous Forward Current - I F (A) 10 0 5 T = 150C J T = 125C J T = 25C J 10 15 20 25 30 35 Reverse Voltage - VR (V) 40 1 Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) 160 Allowable Case Temperature (C) 150 140 130 120 110 100 90 80 70 60 0 Square wave (D=0.50) 80% rated Vr applied D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 DC DC see note (2) (1) 0.1 0.2 0.4 0.6 0.8 1 Forward Voltage Drop - VFM (V) 1.2 0.2 0.4 0.6 0.8 1.0 1.2 Average Forward Current - I F(AV) (A) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) Fig. 4 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) 0.6 10000 Tj = 150C 1000 Reverse Current - I R (A) Average Power Loss (Watts) 0.5 0.4 0.3 0.2 0.1 0 125C 100 10 1 0.1 0.01 0 5 10 15 20 25 100C 75C 50C 25C D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 RMS Limit DC 30 35 40 0 Reverse Voltage - VR (V) 0.2 0.4 0.6 0.8 1 1.2 Average Forward Current - IF(AV) (A) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) Fig. 5 - Forward Power Loss Characteristics (Per Leg) Note (1) Formula used: T = T - (Pd + Pd C J REV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at 80 % VR applied Document Number: 94561 Revision: 18-Apr-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 FCSP07H40TR Vishay High Power Products FlipKY(R) Chip Scale Package Schottky Barrier Rectifier, 0.75 A At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 1000 Non-Repetitive Surge Current - I FSM (A) 100 10 1 10 100 1000 10000 Square Wave Pulse Duration - tp (microsec) Fig. 6 - Maximum Non-Repetitive Surge Current (Per Leg) L High-speed switch Freewheel diode 40HFL40S02 + Vd = 25 V D.U.T. IRFP460 Rg = 25 Current monitor Fig. 7 - Unclamped Inductive Test Circuit LINKS TO RELATED DOCUMENTS Dimensions Part marking information Packaging information http://www.vishay.com/doc?95049 http://www.vishay.com/doc?95060 http://www.vishay.com/doc?95062 www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 94561 Revision: 18-Apr-08 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1 |
Price & Availability of FCSP07H40TR
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |