 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| S/MON/SC965460/A/06/07/2003 page 1 /2 F/GB Relais statique monophase de puissance Power Solid State Relay * Sortie AC synchrone : 24-600VAC-50A * Possibilite de protection IP20 en option : Capot 1K460000 * Adapte aux charges resistives * Avec LED et une faible consommation d'entree . * 24-600VAC -50A Zero-Cross AC Output. * IP20 Protection optional (1K460000). * Designed for resistor loads. * With LED and low input current Dimensions/Size 27 22,8 0,5 SC965460 3,5-32VDC control Ie <10mA 50A/400VAC output 28 O4,7 M4 Application typique/Typical application protection reseau line protection 24-600VAC 19,6 1~ 58,2 43,2 2~ 47,6 Entree control 5-30VDC 4- 1 47,5 3+ + 5,1 3+ 2 25,8 TOLERANCES 0,3 25,4 44,5 M3 * 1-2 peuvent etre inversees/ 1 -2 can be changed * le relais doit etre monte sur dissipateur thermique / SSR must be mounted on a heatsink * option : couvercle de protection des bornes : 1K460 000 / cover : 1K460 000 CHARGE/ LOAD fig. 1 :Caracteristique d'entree / Control characteristic Control characteristics (at 25C) Parametre / Parameter Plage de commande/ Control voltage Courant entree/ Control current (@ Uc ) Tension non fonctionnement/ Release voltage LED entree / Input LED tension inverse/ Reverse voltage Clamping voltage Immunite/ Input immunity : EN61000-4-4 Immunite/ Input immunity : EN61000-4-5 Symbol Uc Ic Uc off Urv Uclamp Min 3,5 <10 2 DC Nom Max 5-12-24 32 <10 <10 green 32 42 2kV 2KV 12 Unit V mA V V V 10 8 Ic ( mA) 6 4 2 0 02 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 Uc ( VDC) Caracteristiques generales / General characteristics Parametre / Parameter Poids/Weight Plage de temperature de stockage / Storage temperature range Plage de temperature de fonctionnement/Operating temperature range Conditions Symbol Typ. 90 -40 / +100 -40 / +100 Unit g C C Proud to serve you All technical caracteristics are subject to change without previous notice. Caracteristiques sujettes a modifications sans preavis. celduc r e l a i s S/MON/SC965460/A/06/07/2003 Caracteristiques de sortie(a 20C) / Output characteristics (at 20C) Parametre / Parameter Tension de charge / Load voltage Plage tension de fonctionnement / Operating range Tension crete / Peak voltage Niveau de synchonisation / Synchronizing level Tension d'amorcage / Latching voltage Courant nominal AC-51/ AC-51 nominal current Courant nominal AC-53/ AC-53 nominal current Courant de surcharge non repetitif /Non repetitive overload current Chute tension directe crete/ On state voltage drop Courant de fuite etat bloque/ Off state leakage current Courant de charge minimum / Minimum load current Temps de fermeture/ Turn on time Temps d'ouverture/ Turn off time Plage de frequence / Operating frequency range dv/dt etat bloque / Off state dv/dt dI/dt maximum non repetitif/ Maximum di/dt non repetitive I2t (<10ms) EMC Test d'immunite conduite / Conducted immunity level EMC Test d'immunite conduite / Conducted immunity level Conformite / Conformity page 2 / 2 F/GB Conditions Symbol Ue Uemin-max Up Usync Ua Ie AC-51 Itsm Vd Ilk Ie min ton max toff max f dv/dt di/dt I2t Typ. 400 24-600 1200 35 10 50 Unit V rms V rms V V V A rms Ie nom ( see Fig. 2 ) * tp=10ms (Fig. 3) @ Ie nom @Ue, 50Hz Uc nom DC ,f=50Hz Uc nom DC ,f=50Hz 550 A 1,45 V <3 mA 5 mA 10 ms 10 ms 0,1-440 Hz 500 V/s 50 A/s 1500 A2s 2kV criterion B 2kV crit.A with external VDR UL VDE= EN60950 IEC 1000-4-4 (burst) IEC 1000-4-5(schocks) EN60947-4-x Fig. 2 Courbes thermiques / Thermal characteristics Pd ( watts) 100 90 0,95K/W 80 70 60 50 40 30 20 10 0 0 5 10 15 20 25 30 35 40 45 50 55 60 0 10 20 30 40 50 60 70 80 90 100 110 120 RMS load current : I (A) Ambient temperature : Tamb (C) 6K/W 50% on state 1,6K/W Full on state 0,55K/W 0,75K/W 0,3K/W T case max (C) 70 75 80 85 * For other loads consult celduc Pour autres charges consulter celduc 1,1K/W 90 95 100 2,2K/W Fig.3 Surcharge de courant : Itsm (Apeak) = f(t) pour modele 50A(Itsm=550A) Surge current : Itsm (Apeak) = f(t) for 50A models with Itsm =550A 600 Itsm (Apeak) 1 -Itsm non repetitif sans tension reappliquee est donne pour la determination des protections. No repetitive Itsm is given without voltage reapplied for the determination of the protection. 2 -Itsm repetitif est donne pour des surcharges de courant (Tj initiale=70C). La repetition de ces surcharges de courant diminue la duree de vie du Relais. Repetitive Itsm is given for inrush current with initial Tj = 70C. The repetition of the surge current decrease the lifetime SSR's . 400 Surcharge de courant non repetitive sans tension reappliquee / No repetive surge current without voltage reapplied. 200 Surcharge de courant repetitive avec tension reappliquee Repetive surge current with voltage reapplied. 0 0,01 0,1 t (s) 1 10 Precautions : * Les relais a semiconducteurs ne procurent pas d'isolation galvanique entre le reseau et la charge. Cautions : * Semiconductor relays don't provide any galvanic insulation between the load and the mains. celduc r e l a i s www.celduc.com Rue Ampere B.P. 4 42290 SORBIERS - FRANCE E-Mail : celduc-relais@celduc.com Fax +33 (0) 4 77 53 85 51 Service Commercial France Tel. : +33 (0) 4 77 53 90 20 Sales Dept.For Europe Tel. : +33 (0) 4 77 53 90 21 Sales Dept. Asia : Tel. +33 (0) 4 77 53 90 19 |
Price & Availability of SC965460
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |