 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Technical Data Sheet Pb Free Specification SSC-FCW100Z (Rev 1.7, General) SSC Drawn Approval Customer Approval SSC-FCW100Z SSCRevision 1.7 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.0.0) Technical Data Sheet [ Contents ] 1. 2. 3. 4. 5. 6. 7. 8. 9. Absolute maximum ratings Electro-optical characteristics CIE chromaticity diagram Characteristic diagram Soldering profile Outline dimension Recommended soldering pad design Reel packing dimension Packing 10. Precaution for use SSC-FCW100Z SSCRevision 1.7 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.0.0) Technical Data Sheet SSC-FCW100Z Description * White colored SMT package * Suitable for all SMT assembly methods and all soldering methods SSC-FCW100Z Features * 2.0 X 1.5 X 0.5 mm * x, y coordination x: 0.31, Y 0.31 Applications * Cellular phone's Flash lighting * Other decoration lighting SSC-FCW100Z SSCRevision 1.7 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.0.0) Technical Data Sheet 1. Absolute maximum ratings Parameter Power Dissipation *1 Forward Current Peak Forward Current Reverse Voltage LED Junction Temperature Thermal Resistance *3 Operation Temperature Storage Temperature *2 *1 (Ta=25E ) Symbol Pd IF IFM VR Tj Value 900 175 600 5 125 Unit mW mA mA V E E E E /W R Topr. Tstg. 10 -30 ~ 85 -40 ~ 100 *1 . Care is to be taken that Power Dissipation does not exceed the Absolute Maximum Ratin of the product. g *2 . I FM conditions is Pulse width Tw2 se c, D uty ratioA 2/ 7 A *3. Thermal Resistance is jun ction to case 2. Electro-Optical Characteristics Parameter Forward Voltage Reverse Current Symbol VF IR Condition IF=175 I IF=320 I (Flash mode*2) (Ta=25E ) Min 2.7 Typ 3.0 3.2 Max 3.7 50 Unit V E VR=5V IF=175 I 6 - 9 13 20 30.5 13 0.31 0.31 130 Luminous Intensity*4 IV IF=320 I IF=600 I IF=320 I (Flash (Flash mode*5) - cd (Peak current mode*6) Illumination Chromaticity Coordination Viewing Angle*7 2e lx X Y 1/2 lx@0.7m lx@1m mode*5) IF=175 I IF=175I *4. The l uminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package. Luminous Intensity Measurement allowance is % SSC-FCW100Z SSCRevision 1.7 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.0.0) 0.7 0.6 y Coord. y Coord. Technical Data Sheet O 3. CIE Chromaticity Diagram 0.9 0.8 0.36 0.34 0.32 0.30 0.28 0.26 C B 0.5 0.4 0.3 0.2 0.1 0.0 0.0 0.1 0.2 0.3 0.4 0.24 0.24 0.26 0.28 0.30 0.32 0.34 0.36 x Coord. 0.5 0.6 0.7 0.8 x Coord. Color Rank Rank B X Y x y 0.247 0.255 0.272 0.300 Chro aticity m Coordinatio n 0.292 0.255 0.397 0.350 0.272 0.300 0.342 0.350 0.317 0.300 0.317 0.300 C SSC-FCW100Z SSCRevision 1.7 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.0.0) Ratio of Luminous Intensity (%) 2.6 2.8 3.0 3.2 3.4 3.6 3.8 Forward Current IF (mA) 160 Chromatisity Coordinate x, y [a.u.] Forward current IF(mA) Technical Data Sheet 4. Characteristic Diagram Forward Current vs Forward Voltage 1000 Relative Intensity vs Forward Current 300 250 200 100 150 100 10 50 0 0 100 200 300 400 500 600 700 800 Forward Voltage VF (V) Forward Current IF (mA) Forward Current vs Derating Curve 200 180 Forward Current vs Chromaticity Coordinate 0.33 x y 0.32 140 120 100 80 60 40 20 0 -2 5 0.31 0.30 0 25 50 o 75 100 0.29 50 100 150 200 250 300 350 A m b ie n t te m p e ra tu re T a ( C ) Forward Current [mA] SSC-FCW100Z SSCRevision 1.7 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.0.0) Intensity [a.u.] Technical Data Sheet Radiation Diagram 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 110 120 130 140 150 160 170 180 100 90 (Ta=25E , IF=175mA) 80 70 60 50 40 30 20 10 0 Y Y Spectrum o 1.0 Ta = 25 C 0.8 0.6 0.4 0.2 0.0 400 450 500 550 600 650 700 750 W avelength [nm ] SSC-FCW100Z SSCRevision 1.7 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.0.0) Device Surface Temperature [ C] Device Surface Temperature [ C] o Technical Data Sheet 5. Soldering profile Reflow Soldering Conditions/ Profile (1) Lead Solder * Preliminary heating to be at 210E max. for 2 minutes max. * Soldering heat to be at 240E max. for 10 seconds max. 280 240 200 160 120 80 40 0 0 15 30 45 60 75 90 105 120 135 150 165 180 195 o Soldering Times [sec] (2) Lead-Free Solder * Preliminary heating to be at 220E max. for 2 minutes max. * Soldering heat to be at 260E max. for 10 seconds max. 280 240 200 160 120 80 40 0 0 15 30 45 60 75 90 105 120 135 150 165 180 195 Soldering Times [sec] (3) Hand Soldering Condition * Not more than 3 seconds @MAX280E , under Soldering iron. [Note] In case the soldered products are reused in soldering process, we don't guarantee the products. SSC-FCW100Z SSCRevision 1.7 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.0.0) Technical Data Sheet 6. Outline Dimension Tolerance: 3/4 0.05, Unit: (R) Resin 2.0 0 1.60 0.18 3/4 0 .03 An ode 2.0 0 1.20 1.50 [T O P V I EW] 0.50 3/4 0 [SI DE V I EW] .05 1.50 [B OT T O M VI ] EW 0.50 PCB Cathode [Cir cuit Diagra m] 7. Recommended Soldering Pad Design [ Normal Solder pad ] [ Solder pad for heat radiation ] SSC-FCW100Z SSCRevision 1.7 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.0.0) 8.00 .2 3/4 2 .75) ( 3.53/40 .05 22 133/40 .2 Label Tolerance: 3/4 0.2, Unit: (R) (1) Quantity: 2,000pcs./Reel (2) Cumulative Tolerance: Cumulative Tolerance/10pitches to be 3/4 0.2mm (3) Adhesion Strength of Cover Tape: Adhesion strength to be 0.1-0.7N when the over tape is turned off from the carrier tape at10 angle to be the carrier tape. (4) Package: P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package. SSC-FCW100Z SSCRevision 1.7 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.0.0) + 60 0 .2 -0 Technical Data Sheet 8. Reel Packing Dimension 1.753/4 0.1 4.03/4 0.1 0 ? 1 . 5 +-0.1 0.65 0.1 3/4 0.23/4 0.05 0 180+-3 11.4 9 3/40 .3 2 3/40 .2 Technical Data Sheet 9. Packing R e el P/ N : # # # # # # # # # # ## A| C i :S S C - FC W 10 Z Lot N o ########## 1/4o *(R) : 2, 0 0 A l u m i n u m Vinyl Bag P/ N :########## ## A| C i : S S C - FC W 10 Z Lot N o ########## 1/4o *(R) : 2, 00 O u t e r Box *Ma ter ial TY 7 inch PE : Pa per (SW3 S IZE( m) b 2 0 14 B(B ) a 245 c 2 c CH IP L C - FC W ED 100Z C HIP LED b PA RT :S CO DE : Q 'Y T LOT N DA TE O :2 : : SE 0 ,0 0 0 E A a O U L SE MI CO N D U C T O R CO .,L T D SSC-FCW100Z SSCRevision 1.7 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.0.0) Technical Data Sheet 10. Precaution for Use (1) Storage In order to avoid the absorption of moisture, it is recommended to store in the dry box (or desiccator) with a desiccant. Otherwise, to store them in the following environment is recommended. Temperature : 5E (2) Attention after opened However LED is corresponded SMD, when LED be soldered dip, interfacial separation may affect the light transmission efficiency, causing the light intensity to drop. Attention in followed. a. After opened and mounted, the soldering shall be quickly. b. Keeping of a fraction Temperature : 5 ~ 40E Humidity : less than 30% (3) In case of more than 1 week passed after opening or change color of indicator on desiccant components shall be dried 10-12hr. at 603/4 5E . (4) In case of supposed the components is humid, shall be dried dip-solder just before. 100Hr at 803/4 5E or 12Hr at 1003/4 5E . (5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to normal temp. after soldering. (6) Quick cooling shall not be avoid. (7) Components shall not be mounted on warped direction of PCB. (8) Anti radioactive ray design is not considered for the products listed here in. (9) Gallium arsenide is used in some of the products listed in this publication. These products are dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed. (10) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When washing is required, IPA should be used. (11) When the LEDs are illuminating, operating current should be decided after considering the ambient maximum temperature. (12) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage. (13) The LEDs must be soldered within seven days after opening the moisture-proof packing. (14) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry place. (15) The appearance and specifications of the product may be modified for improvement without notice. SSC-FCW100Z SSCRevision 1.7 www.ZLED.com 1/4-1/2AoE : SSC-QP-7-07-24 (Rev.0.0) ~30E Humidity : 60%HR max. |
Price & Availability of FCW100Z
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |