View HSMW-A100-T50J1_4347477.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

HSMW-A10x-xxxxx
White Surface Mount LED Indicator SMT PLCC-2
Data Sheet
Description
This family of SMT LEDs is packaged in the industry standard PLCC-2 package. These SMT LEDs have high reliability performance and are designed to work under a wide range of environmental conditions. This high reliability feature makes them ideally suited to be used under harsh interior automotive as well as interior signs application conditions. To facilitate easy pick & place assembly, the LEDs are packed in EIA-compliant tape and reel. Every reel will be shipped in single intensity and color bin. These LEDs are compatible with IR solder reflow process. The super wide viewing angle at 120 makes these LEDs ideally suited for panel, push button, or general backlighting in automotive interior, office quipment, industrial equipment, and home appliances. The flat top emitting surface makes it easy for these LEDs to mate with light pipes. With the built-in reflector pushing up the intensity of the light output, these LEDs are also suitable to be used as LED pixels in interior electronic signs. The super high brightness white PLCC-2 SMT LED is ideal for all kinds of backlighting applications in interior automotive, office automation, electrical appliance and industrial instrument markets to offer a clear and attractive product differentiation. The wide viewing angle at 120also enables this white PLCC-2 SMT LED to be used in localised area ambience lighting in applications such as vanity mirror light, cabin light, and car door puddle light. The white color backlighting offered by this series of white PLCC-2 SMT LED is suitable to backlight color LCD screen in applications such as GPS (global positioning system) screens in cars.
Features
* Industry standard PLCC-2 package (plastic leaded chip carrier) * Super high reliability LED package * Tight white color binning * Super wide viewing angle at 120 * Available in 8 mm carrier tape on 7-inch reel (2000 pieces) * Compatible with IR and TTW soldering process
Applications
* Interior automotive - Instrument panel backlighting - Central console backlighting - Cabin backlighting * Office automation, home appliances, industrial equipment - Front panel backlighting - Push button backlighting - Display backlighting
CAUTION: HSMW-A10x LEDs are Class 2 ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Avago Technologies Application Note AN-1142 for additional details.
Package Dimensions
2.80 (0.110) 2.20 (0.087) 0.05 (0.002) 1.90 (0.073) 0.80 (0.031)
3.20 (0.126)
3.50 (0.138)
0.80 (0.031)
CATHODE MARKING
NOTE: ALL DIMENSIONS IN MILLIMETERS (INCHES).
Device Selection Guide
Color White Part Number HSMW-A101-R50J1 HSMW-A100-T50J1 Min. IV (mcd) 100.00 250.00 Typ. IV (mcd) Max. IV (mcd) 395.00 1000.00 Test Current (mA) 20 20 Dice Technology InGaN InGaN
Note: 1. The luminous intensity IV, is measured at the mechanical axis of the lamp package. The actual peak of the spatial radiation pattern may not be aligned with this axis.
Part Numbering System
HSM x1 -A x2 x3x4 - x5x6 x7 x8x9 Packaging 0ption Color Bin Selection Intensity Bin Select Device Specific Configuration Package Type LED Chip Color
2
Absolute Maximum Ratings (TA = 25C)
Parameters DC Forward Current[1] Peak Forward Current[2] Power Dissipation Reverse Voltage Junction Temperature Operating Temperature Storage Temperature
Notes: 1. Derate linearly as shown in Figure 4. 2. Duty factor = 10%, frequency = 1 kHz.
HSMW 30 mA 90 mA 114 mW 5V 110C -40C to +100C -40C to +100C
Optical Characteristics (TA = 25C)
Dice Color White Part Number HSMW-A10x Technology InGaN Typ. Chromaticity Coordinates[1] x 0.31 y 0.31 Viewing Angle 2q1/2[2] (Degrees) Typ. 120 Luminous Efficacy, hV[3] (lm/W) Typ. 260 Luminous Intensity/ Total Flux IV (mcd)/FV (lm) Typ. 0.45
Notes: 1. The chromaticity coordinates are derived from the CIE 1931 Chromaticity Diagram and represent the perceived color of the device. 2. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. 3. Radiant intensity, Ie in watts/steradian, may be calculated from the equation Ie = Iv/v, where Iv is the luminous intensity in candelas and v is the luminous efficacy in lumens/watt.
Electrical Characteristics (TA = 25C)
Part Number HSMW Forward Voltage, VF (Volts) @ IF = 20 mA Typ. Max. 3.4 4.05 Reverse Voltage, VR @ 10 A Min. 5 Thermal Resistance RJP (C/W) 280
3
35
RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA)
1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35
30
FORWARD CURRENT - mA
25 20 15 10 5 0 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0
FORWARD VOLTAGE - V
DC FORWARD CURRENT - mA
Figure 1. Forward Current vs. forward voltage
Figure 2. Relative intensity vs. forward current.
0.020 0.015 5 mA 10 mA
CURRENT - mA
35 30 25 20 15 10 5
0 0.001 0.002 0.003
Y-COORDINATES
0.010 0.005 0 -0.005 -0.010 -0.003 -0.002 -0.001 30 mA 20 mA
0
0
20
40
60
80
100
120
X-COORDINATES
TEMPERATURE - C
Figure 3. Chromaticity shift vs. currrent. Note: (x,y) values @ 20 mA reference to (0.0)
Figure 4. Maximum forward current vs. ambient temperature. Derated based on TJMAX = 110C, RqJA = 500C/W.
1.0 0.8
NORMALIZED INTENSITY
0.6 0.4 0.2 0 -90 -80 -70 -60 -50 -40 -30 -20 -10
0
10
20
30
40
50
60
70
80 90
ANGULAR DISPLACEMENT - DEGREES
Figure 5. Radiation pattern.
4
10 to 20 SEC. 217 C 255 C +5 C -0 C 6 C/SEC. MAX.
20 SEC. MAX.
TEMPERATURE
240C MAX. 3C/SEC. MAX. 100-150C 3C/SEC. MAX. 120 SEC. MAX. TIME 60-150 SEC.
183C 6C/SEC. MAX.
TEMPERATURE
3 C/SEC. MAX. 125 C 25 C
MAX. 120 SEC.
60 to 150 SEC.
TIME * THE TIME FROM 25 C TO PEAK TEMPERATURE = 6 MINUTES MAX.
Figure 6a. Recommended SnPb reflow soldering profile.
Figure 6b. Recommended Pb-free reflow soldering profile.
Note: For detail information on reflow soldering of Avago surface mount LEDs, do refer to Avago Application Note AN 1060 Surface Mounting SMT LED Indicator Components.
250
TURBULENT WAVE BOTTOM SIDE OF PC BOARD TOP SIDE OF PC BOARD FLUXING
LAMINAR WAVE HOT AIR KNIFE
4.50
TEMPERATURE C
200 150 100 50 30 0 0 10
1.50
2.60
PREHEAT 20 30 40 6 50 0 70 80 90 100
TIME SECONDS CONVEYOR SPEED = 1.83 M/MIN (6 FT/MIN) PREHEAT SETTING = 150C (100C PCB) SOLDER WAVE TEMPERATURE = 245C AIR KNIFE TEMPERATURE = 390C AIR KNIFE DISTANCE = 1.91 mm (0.25 IN.) AIR KNIFE ANGLE = 40 SOLDER: SN63; FLUX: RMA NOTE: ALLOW FOR BOARDS TO BE SUFFICIENTLY COOLED BEFORE EXERTING MECHANICAL FORCE.
Figure 7. Recommended wave soldering profile.
SOLDER RESIST
Figure 8. Recommended soldering pad pattern.
5
TRAILER 200 mm MIN. FOR 180 REEL. 200 mm MIN. FOR 330 REEL.
COMPONENT
LEADER 480 mm MIN. FOR 180 REEL. 960 mm MIN. FOR 330 REEL.
C
A
USER FEED DIRECTION
Figure 9. Tape leader and trailer dimension.
4 0.1
4 0.1
2 0.05
2.29 0.1
1.75 0.1 +0.1 1.5 -0 3.5 0.05 +0.3 8 - 0.1 3.81 0.1 A +0.1 1- 0
C
3.05 0.1
8 0.229 0.01
Figure 10. Tape dimension.
6
2 +0.5 -0 180
20.5 0.3
62.5
13 0.2
+0 - 2.5
8.4
+1.50 (MEASURED AT OUTER EDGE) - 0.00
14.4 (MAX. MEASURED AT HUB) LABEL AREA (111 mm x 57 mm) WITH DEPRESSION (0.25 mm) 7.9 (MIN.) 10.9 (MAX.)
Figure 11. Reel dimensions.
USER FEED DIRECTION
CATHODE SIDE
PRINTED LABEL
Figure 12. Reeling orientation.
Moisture Sensitivity
This product is qualified as Moisture Sensitive Level 2a per Jedec J-STD-020. Precautions when handling this moisture sensitive product is important to ensure the reliability of the product. Do refer to Avago Application Note AN5305 Handling of Moisture Sensitive Surface Mount Devices for details. A. Storage before use - Unopen moisture barrier bag (MBB) can be stored at <40C/90%RH for 12 months. If the actual shelf life has exceeded 12 months and the HIC indicates that baking is not required, then it is safe to reflow the LEDs per the original MSL rating. - It is not recommended to open the MBB prior to assembly (e.g. for IQC). B. Control after opening the MBB - The humidity indicator card (HIC) shall be read immediately upon opening of MBB.
- The LEDs must be kept at <30C / 60%RH at all time and all high temperature related process including soldering, curing or rework need to be completed within 672 hours. C. Control for unfinished reel - For any unuse LEDs, they need to be stored in sealed MBB with desiccant or desiccator at <5%RH. D. Control of assembled boards - If the PCB soldered with the LEDs is to be subjected to other high temperature processes, the PCB need to be stored in sealed MBB with desiccant or desiccator at <5%RH to ensure no LEDs have exceeded their floor life of 672 hours. E. Baking is required if: - "10%" or "15%" HIC indicator turns pink. - The LEDs are exposed to condition of >30C / 60% RH at any time. - The LEDs floor life exceeded 672 hours. Recommended baking condition: 605C for 20 hours.
7
Intensity Bin Select (X5X6)
Individual reel will contain parts from one half bin only. X5 Min Iv Bin X6 0 3 4 5 7 8 9
Color Bin Limits
Bin ID A B C D E F x y x y x y x y x y x y Limits (Chromaticity Coordinates) 0.352 0.365 0.365 0.377 0.395 0.360 0.340 0.352 0.352 0.360 0.377 0.341 0.327 0.340 0.340 0.342 0.360 0.325 0.315 0.327 0.327 0.325 0.342 0.306 0.302 0.315 0.315 0.307 0.325 0.290 0.290 0.302 0.302 0.290 0.307 0.271 0.352 0.341 0.340 0.325 0.327 0.306 0.315 0.290 0.302 0.271 0.290 0.255
Full Distribution 3 half bins starting from X51 4 half bins starting from X51 5 half bins starting from X51 3 half bins starting from X52 4 half bins starting from X52 5 half bins starting from X52
Note: Tolerance for each bin limit = 0.02.
Intensity Bin Limits
Bin ID Q1 Q2 R1 R2 S1 S2 T1 T2 U1 U2 V1 V2 Min. (mcd) 71.50 90.00 112.50 140.00 180.00 224.00 285.00 355.00 450.00 560.00 715.00 900.00 Max. (mcd) 90.00 112.50 140.00 180.00 224.00 285.00 355.00 450.00 560.00 715.00 900.00 1125.00
Color Bin Select (X7)
Individual reel will contain parts from one full bin only. X7 0 Full Distribution Z A and B only Y B and C only W C and D only V D and E only U E and F only Q A, B and C only P B, C and D only N C, D and E only M D, E and F only 1 A, B, C and D only 3 B, C, D and E only 4 C, D, E and F only 5 A, B, C, D and E only 6 B, C, D, E and F only
Y-COORDINATE
0.40 A 0.35 C D 0.30 F 0.25 0.25 E B
0.30
0.35
0.40
X-COORDINATE
Figure 14.
Packaging Option (X8X9)
Option J1 J2 Test Current 20 mA 10 mA Package Type Top Mount Top Mount Reel Size 7 inch 7 inch
Tolerance of each bin limit = 12%.
For product information and a complete list of distributors, please go to our website:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries. Data subject to change. Copyright (c) 2007 Avago Technologies Limited. All rights reserved. Obsoletes AV01-0645EN AV02-0490EN - June 19, 2007

▲Up To Search▲

Price & Availability of HSMW-A100-T50J1

	To Download HSMW-A100-T50J1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .