|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Nov.10, 2005 SFF GE-PON PX20 ONU Transceiver FTM-9412P-F20(G)/F20i(G) (IEEE 802.3ahTM-2004 1000BASE-PX20-U) Members of FlexonTM Family Standard Features Compliant with SFF MSA Single fiber bi-directional data links with symmetric 1.25Gbps upstream and 1.25Gbps downstream Integrated with micro-optics WDM filter for dual wavelength Tx/Rx operation at 1310/1490nm 1310nm burst-mode transmitter with DFB laser 1490nm continuous-mode receiver with PIN-TIA and 1550nm optical signal rejection Different operating temperature class 0 to 70 Standard Class -40 to 85 Industrial Class 2 x 5 SF F package with SC/UPC pigtail Single 3.3V power supply LVPECL compatible data input/output interface LVTTL transmitter burst-mode control LVTTL receiver signal-detected indication Low EMI and excellent ESD protection Class I laser safety standard IEC-60825 compliant RoHS compliance(FTM-9412P-F20G/F20iG) 2x 5 SFF GE-PON PX20 ONU transceiver family is Optical Network Unit (ONU) for IEEE802.3ahTM-2004 1000BASE-PX20-U application The transceiver is the high performance module for 1.25Gbps data link in single fiber by using 1310nm burst-mode transmitter and 1490nm continuous-mode receiver with 1550nm optical signal rejection. The transmitter section uses a multiple quantum well 1310nm DFB laser and is Class laser compliant product according to international safety standard IEC-60825. The receiver section uses an integrated 1490nm PIN and preamplifier mounted in an optical Gigabit Ethernet Passive Optical Networks (GE-PON) - ONU side Gigabit Ethernet Point-to-Point Bi-directional Transmission Media Converts for Fiber-In-The-Loop (FITL) header and limiting post-amplifier IC. The optical burst output can be enabled by a LVTTL logic high-level input of TX_BRST. Signal Detected (SD) output is provided to indicate the detection of an input optical signal of receiver. Doc No: DS3493001-2b Compliant with IEEE Std 802.3ahTM -2004 1000BASE-PX20-U Compliant with FCC 47 CFR Part 15, Class B Compliant with FDA 21 CFR 1040.10 and 1040.11, Class I Description Applications Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 1 of 1 SFF GE-PON PX20 ONU Transceiver 20km transmission FTM-9412P-F20(G)/F20i(G) Preliminary Data Sheet Nov.10, 2005 Regulatory Compliance The transceivers have been tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to FlexonTM regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office listed at the end of documentation. Table 1 - Regulatory Compliance Feature Electrostatic Discharge (ESD) to the Electrical Pins Electromagnetic Interference (EMI) Immunity Laser Eye Safety Component Recognition MIL-STD-883E Method 3015.7 FCC Part 15 Class B EN55022 Class B (CISPR 22B) VCCI Class B IEC 61000-4-3 FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 UL and CSA Compliant with standards Compliant with Class I laser product Compliant with standards Compliant with standards Standard Performance Class (>500 V) RoHS 2002/95/EC 4.1&4.2 Compliant with standards Absolute Maximum Ratings Absolute Maximum Ratings are those values, beyond which, some damages may occur to the devices. Exposure to conditions above the Absolute Maximum Ratings listed in Table 2 may negatively impact the reliability of the products. Table 2 - Absolute Maximum Ratings Parameter Storage Ambient Temperature Operating Ambient Temperature (Note 1) Operating Humidity Power Supply Voltage Input Voltage Receiver Damaged Threshold Soldering Temperature Bending Radius Pigtail Fiber Contact Temperature 30 85 Symbol TSTG TOPR HOPR VCC Min. -40 0 -40 5 0 GND +7 400 Max. 85 70 85 95 4 Vcc Unit C C % V V dBm C mm C Note 2 FTM-9412P-F20(G) FTM-9412P-F20i(G) Note Note 1: With airflow 1m/sec when ambient temperature is above 60C Note 2: Only for soldering by iron and 10 seconds on leads only Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 2 of 2 Doc No: DS3493001-2b SFF GE-PON PX20 ONU Transceiver 20km transmission FTM-9412P-F20(G)/F20i(G) Preliminary Data Sheet Nov.10, 2005 Recommended Operating Conditions Table 3 - Recommended Operating Conditions Parameter Power Supply Voltage Operating Ambient Temperature (Note 1) Operating Humidity Range Data Rate Data Rate Drift -100 Symbol VCC TOPR HOPR Min. 3.13 0 -40 5 1.25 +100 Typ. 3.3 Max. 3.47 70 85 95 Unit V C % Gbit/s PPM Note 3.3V5% FTM-9412P-F20(G) FTM-9412P-F20i(G) Note 1: When ambient temperature is above 60C, airflow at rate higher than 1m/sec is required Optical and Electrical Characteristics Table 4 - Transmitter Optical and Electrical Characteristics FTM-9412P-F20(G) FTM-9412P-F20i(G) Optical Center Wavelength Optical Spectrum Width (-20dB) Side Mode Suppression Ratio Average Launch Power (BOL) Average Launch Power (EOL) Average Launch Power-OFF Transmitter Extinction Ratio Rise/Fall Time (20%-80%) Burst Turn On Time Burst Turn Off Time Burst Enable Duration Burst Disable Duration RIN15OMA Optical Return Loss Tolerance Transmitter Reflectance Transmitter and Dispersion Penalty Optical Eye Diagram Data Input Differential Swing Input Differential Impedance Power Supply Current Transmitter Burst Control Voltage - Low Transmitter Burst Control Voltage - High VIN ZIN ICC_TX VBURST, L VBURST, H 0 2.0 TDP 200 90 100 0C Note 1: Launched into 9/125um Single Mode Fiber. Note 2: Measured with PRBS 27-1 test pattern @1.25 Gbit/s. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 3 of 3 Doc No: DS3493001-2b SFF GE-PON PX20 ONU Transceiver 20km transmission FTM-9412P-F20(G)/F20i(G) Preliminary Data Sheet Nov.10, 2005 Note 3: Measured with the fourth-order Bessel-Thomson filter OFF. Note 4: Refer to Timing Parameter Definition in Burst Mode Sequence. Note 5: Maximum sensitivity penalty due to transmitter and dispersion effect through 20km of SMF optical fiber. Note 6: Transmitter eye mask definition is {0.22UI, 0.375UI, 0.20UI, 0.20UI, 0.30UI}. Note 7: Compatible with LVPECL/CML input (See Recommended Interface Circuit) Note 8: TX_BRST (See Pin Function Definitions) Table 5 - Receiver Optical and Electrical Characteristics FTM-9412P-F20(G) FTM-9412P-F20i(G) Parameter Operating Wavelength Sensitivity Saturation Signal-Detected Assert Level Signal-Detected Deassert Level Signal-Detected Hysteresis Receiver Reflectance WDM Filter Isolation Power Supply Current Data Output Differential Swing Signal-Detected Voltage - Low Signal-Detected Voltage - High Signal-Detected Assert Time Signal-Detected Deassert Time 7 0C Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 4 of 4 Doc No: DS3493001-2b SFF GE-PON PX20 ONU Transceiver 20km transmission FTM-9412P-F20(G)/F20i(G) Preliminary Data Sheet Nov.10, 2005 TX_BRST T EN_DUR T DIS_DUR TD+ TD- Optical Power Output ER for CM operation Average Power <=-45dBm TBURST_ON ER and Average Power within 15% CM operation TBURST_OFF Burst On Condition Burst Off Condition Figure 1 Timing Parameter Definition in Burst Mode Sequence Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 5 of 5 Doc No: DS3493001-2b SFF GE-PON PX20 ONU Transceiver 20km transmission FTM-9412P-F20(G)/F20i(G) Preliminary Data Sheet Nov.10, 2005 Recommended Interface Circuit Figure 2 shows the recommended interface scheme for FTM-9412P-F20(G)/F20i(G) VEET(7) +3.3V 2x1uH 10uF 0.1uF 10uF PON_TX_DISABLE Z=50 TXP (Note A) TXN 2x150 Z=50 0.1uF 0.1uF VCCT(6) VCCR(2) VEER(1) TX_BRST(8) FTM-9412P-F20(G)/F20i(G) TD+(9) 100 TD-(10) BM Laser Driver GE-PON MAC SerDes R1 RXN R5 RXP R3 R4 SD(3) (Note B) +3.3V R2 Z=50 Z=50 RD-(4) RD+(5) +3.3V 10K CM Limiting Amplifier 2x150 PON_LOS Figure 2 Recommended Interface Circuit Note A: Open emitter output internally. Note B: LVPECL output, AC coupled internally. Input stage in SerDes IC is assumed with high impedance and internal bias to Vcc-1.3V R1=R2=R3=R4=N.C, R5=100 Input stage in SerDes IC is assumed without internal bias to Vcc-1.3V R1=R2=82,R3=R4=130,R5=N.C Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 6 of 6 Doc No: DS3493001-2b SFF GE-PON PX20 ONU Transceiver 20km transmission FTM-9412P-F20(G)/F20i(G) Preliminary Data Sheet Nov.10, 2005 Pin Definitions 2x5 SFF planform in Figure 3 below shows the pin information of electrical interface and mounting studs. Functions are described in Table 6 with some accompanying notes. Figure 3 2x5 SFF Planform Table 6 - Pin Function Definitions Pin No. 1 2 3 4 5 6 7 8 9 10 F Name VEER VCCR SD RDRD+ VCCT VEET TX_BRST TD+ TDMS Description Receiver Signal Ground Receiver Power Supply Receiver Signal-Detected Indication Inverted Receiver Data Output Non-inverted Receiver Data Output Transmitter Power Supply Transmitter Signal Ground Transmitter Burst Control Transmitter Non-inverted Data Input Transmitter Inverted Data Input Mounting Studs 3 4 5 1 2 Notes Note 1: LVTTL logic output, with internal 10K pull-up resistor. Optical Signal-Detected: High; Optical Signal Loss: Low Note 2: LVPECL logic output, AC coupled internally. (See Recommended Interface Circuit) Note 3: A positive level enable optical signal output under burst mode. (See Timing Parameter Definition in Burst Mode Sequence) Note 4: Compatible with LVPECL/CML input (See Recommended Interface Circuit) Note 5: The mounting studs are provided for transceiver mechanical attachment to circuit board. They may also provide an optional connection of the transceiver to the equipment chassis ground. The holes in the circuit board must be tied to chassis ground. It is not recommended that the mounting studs be connected to signal ground. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 7 of 7 Doc No: DS3493001-2b SFF GE-PON PX20 ONU Transceiver 20km transmission FTM-9412P-F20(G)/F20i(G) Preliminary Data Sheet Nov.10, 2005 Mechanical Design Diagram The form factor is 2x5 SFF with pigtail fiber. The pigtail fiber has a length 520 - 550mm and 30mm minimum bending radius. The fiber connector type is SC/UPC. The mechanical design diagram is shown in Figure 4. (Dimension in mm) 4.81 0.05 10.16 0 -0.05 9.9 0.1 0 3.1-0.1 0.5 1.778 4x1.778(=7.112) 520~550 49.0 0.1 Label Figure 4 Mechanical Design Diagram Table 7 - Pigtail Fibre Characteristics Parameter Mode Field Diameter Cladding Diameter Jacket Diameter Bending Radius of Pigtail Fiber Tension Force on Pigtail Fiber Pigtail Fiber Length Optical Return Loss (UPC type) -1310nm 520 50 30 1 550 Min. Typical 9 125 0.9 Max. Unit m m mm mm Kg mm dB Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 8 of 8 0.9 Doc No: DS3493001-2b SFF GE-PON PX20 ONU Transceiver 20km transmission FTM-9412P-F20(G)/F20i(G) Preliminary Data Sheet Nov.10, 2005 Ordering Information FTM 9 4 1 2 P F 2 0 X X Temperature Wavelength 9: Multiwave in Single Fiber Receptacle P: Pigtail Blank: 0 ~ 70 i: -40 ~ 85 Function 4: Burst 1310nm Tx/1490nm Rx Package F: SFF 2x5 RoHS G: RoHS compliance Bit Rate(U)/(D) 12: 1.25G/1.25G Distance 20: GE-PON 20km (PX20) Part No. Product Description FTM-9412P-F20 FTM-9412P-F20G FTM-9412P-F20i FTM-9412P-F20iG 1310nm(TX)/1490nm(RX), SC/UPC Pigtailed 2x5 SFF for GE-PON ONU 20km application, with 1550nm optical signal blocked, 0C ~ 70C, Tx AC Coupling, Rx AC Coupling 1310nm(TX)/1490nm(RX), SC/UPC Pigtailed 2x5 SFF for GE-PON ONU 20km application, with 1550nm optical signal blocked, 0C ~ 70C, Tx AC Coupling, Rx AC Coupling, RoHS compliance 1310nm(TX)/1490nm(RX), SC/UPC Pigtailed 2x5 SFF for GE-PON ONU 20km application, with 1550nm optical signal blocked, -40C ~ 85C, Tx AC Coupling, Rx AC Coupling 1310nm(TX)/1490nm(RX), SC/UPC Pigtailed 2x5 SFF for GE-PON ONU 20km application, with 1550nm optical signal blocked, -40C ~ 85C, Tx AC Coupling, Rx AC Coupling, RoHS compliance Related Documents For further information, please refer to the following documents: IEEE Std 802.3ahTM-2004.PDF Obtaining Document You can visit our website: http://www.fiberxon.com/ Or contact with Fiberxon, Inc. America Sales Office listed at the end of documentation to get the latest documents. Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 9 of 9 Doc No: DS3493001-2b SFF GE-PON PX20 ONU Transceiver 20km transmission FTM-9412P-F20(G)/F20i(G) Preliminary Data Sheet Nov.10, 2005 Revision History Reversion Initiate Review Approve Subject Release Date Pre 1a Zachary Lu Johnny Yang Peter Tang Initial datasheet (Using External ONU BOSA) Only including FTM-9412P-F20 (Doc No. DS3493001-1a) Feb.23,2005 Pre 1b Zachary Lu Johnny Yang Peter Tang Revised datasheet (Using External ONU BOSA) Modify sensitivity form -27.5dBm to -26.5dBm In page4 (Doc No. DS3493001-1b) Apr.12,2004 Pre 2a Zachary Lu Johnny Yang Peter Tang Revised datasheet (Using Internal ONU BOSA) 1. 2. Add new P/N: FTM-9412P-F20i Update Mechanical Design Diagram in Figure 4, Page 8 (Doc No. DS3493001-2a) Sep.19,2005 Pre 2b Zachary Lu Johnny Yang Peter Tang Add new P/N: FTM-9412P-F20G/F20iG (Doc No. DS3493001-2b) Nov.10,2005 Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 10 of 10 Doc No: DS3493001-2b SFF GE-PON PX20 ONU Transceiver 20km transmission FTM-9412P-F20(G)/F20i(G) Preliminary Data Sheet Nov.10, 2005 (c) Copyright Fiberxon Inc. 2005 All Rights Reserved. All information contained in this document is subject to change without notice. The products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Fiberxon's product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Fiberxon or third parties. All information contained in this document was obtained in specific environments, and is presented as an illustration. The results obtained in other operating environment may vary. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS. In no event will Fiberxon be liable for damages arising directly from any use of the information contained in this document. Contact U.S.A. Headquarter: 5201 Great America Parkway, Suite 350 Santa Clara, CA 95054 U. S. A. Tel: 408-562-6288 Fax: 408-562-6289 Or visit our website: http://www.fiberxon.com/ Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 11 of 11 Doc No: DS3493001-2b |
Price & Availability of FTM-9412P-F20 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |