|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
STD11NM60N-1 - STB11NM60N/-1 STD11NM60N-STP11NM60N-STF11NM60N N-channel 600 V - 0.37 - 10 A - TO-220 - TO-220FP- I2PAK - IPAK DPAK - D2PAK second generation MDmeshTM Power MOSFET Features Type STB11NM60N-1 STB11NM60N STD11NM60N STD11NM60N-1 STF11NM60N STP11NM60N VDSS (@TJmax) 650 V 650 V 650 V 650 V 650 V 650 V RDS(on) max 0.45 0.45 0.45 0.45 0.45 0.45 ID 1 2 3 3 3 2 1 1 10 A 10 A 10 A 10 A 10 A(1) 10 A TO-220 DPAK IPAK 1. Limited only by maximum temperature allowed 3 12 3 1 1 3 2 100% avalanche tested Low input capacitance and gate charge Low gate input resistance IPAK DPAK TO-220FP Figure 1. Internal schematic diagram Application Switching applications Description This series of devices is designed using the second generation of MDmeshTM technology. This revolutionary Power MOSFET associates a new vertical structure to the company's strip layout to yield one of the world's lowest on-resistance and gate charge. It is therefore suitable for the most demanding high efficiency converters. Table 1. Device summary Marking B11NM60N 11NM60N D11NM60N D11NM60N P11NM60N F11NM60N Rev 4 Package IPAK DPAK IPAK DPAK TO-220 TO-220FP Packaging Tube Tape and reel Tube Tape and reel Tube Tube 1/21 www.st.com 21 Order codes STB11NM60N-1 STB11NM60N STD11NM60N-1 STD11NM60N STP11NM60N STF11NM60N March 2008 Contents STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Contents 1 2 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 Electrical characteristics (curves) ............................ 6 3 4 5 6 Test circuits .............................................. 9 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 2/21 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Electrical ratings 1 Electrical ratings Table 2. Absolute maximum ratings Value Symbol Parameter TO-220/IPAK D/DPAK/IPAK VDS VGS ID ID IDM (2) PTOT Drain-source voltage (VGS = 0) Gate-source voltage Drain current (continuous) at TC = 25 C Drain current (continuous) at TC = 100 C Drain current (pulsed) Total dissipation at TC = 25 C Derating factor dv/dt (3) VISO Tstg TJ Peak diode recovery voltage slope Insulation withstand voltage (RMS) from all three leads to external heat sink (t = 1 s;TC = 25 C) Storage temperature Max. operating junction temperature --55 to 150 150 10 6.3 40 90 0.8 15 2500 600 25 10(1) 6.3 (1) 40(1) 25 0.2 Unit TO-220FP V V A A A W W/C V/ns V C C 1. Limited only by maximum temperature allowed 2. Pulse width limited by safe operating area 3. ISD 10 A, di/dt 400 A/s, VDD = 80% V(BR)DSS Table 3. Symbol Thermal data Value Parameter TO-220 IPAK DPAK DPAK IPAK TO-220FP Thermal resistance junction-case max Thermal resistance junction-amb max Thermal resistance junction-pcb max Maximum lead temperature for soldering purposes -62.5 -Unit Rthj-case Rthj-amb Rthj-pcb 1.38 -50 -30 100 -- 5 62.5 -- C/W C/W C/W Tl 300 C 3/21 Electrical ratings STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Table 4. Symbol IAS EAS Avalanche characteristics Parameter Avalanche current, repetitive or not-repetitive (pulse width limited by TJ max) Single pulse avalanche energy (starting TJ = 25 C, ID = IAS, VDD = 50 V) Max value 3.5 200 Unit A mJ 4/21 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Electrical characteristics 2 Electrical characteristics (TCASE=25C unless otherwise specified) Table 5. Symbol V(BR)DSS dv/dt(1) On/off states Parameter Drain-source breakdown voltage Drain-source voltage slope Zero gate voltage drain current (VGS = 0) Gate body leakage current (VDS = 0) Gate threshold voltage Static drain-source on resistance Test conditions ID = 1 mA, VGS= 0 VDD = 400 V,ID = 5 A, VGS =10 V VDS = Max rating, VDS=Max rating,Tc=125 C VGS = 20 V VDS= VGS, ID = 250 A VGS= 10 V, ID= 5 A 2 3 0.37 Min. 600 45 1 10 100 Typ. Max. Unit V V/ns A A nA V IDSS IGSS VGS(th) RDS(on) 1. 4 0.45 Characteristic value at turn off on inductive load Table 6. Symbol gfs(1) Ciss Coss Crss Coss eq.(2) Dynamic Parameter Forward transconductance Input capacitance Output capacitance Reverse transfer capacitance Equivalent output capacitance Gate input resistance Test conditions VDS =15 V, ID= 5 A VDS =50 V, f=1 MHz, VGS=0 Min. Typ. 7.5 850 44 5 130 Max. Unit S pF pF pF pF VGS=0, VDS =0 to 480 V f=1 MHz Gate DC Bias=0 Test signal level=20 mV open drain VDD=480 V, ID = 10 A VGS =10 V (see Figure 19) Rg 3.7 nC nC nC Qg Qgs Qgd 1. Total gate charge Gate-source charge Gate-drain charge 31 4.2 15.9 Pulsed: pulse duration = 300s, duty cycle 1.5% 2. Coss eq. is defined as a constant equivalent capacitance giving the same charging time as Coss when VDS increases from 0 to 80% VDSS 5/21 Electrical characteristics STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Table 7. Symbol td(on) tr td(off) tf Switching times Parameter Turn-on delay time Rise time Turn-off delay time Fall time Test conditions VDD = 300 V, ID = 5 A, RG = 4.7 , VGS = 10 V (see Figure 18) (see Figure 23) Min. Typ. 22 18.5 50 12 Max. Unit ns ns ns ns Table 8. Symbol ISD ISDM VSD(1) trr Qrr IRRM trr Qrr IRRM 1. Source drain diode Parameter Source-drain current Source-drain current (pulsed) Forward on voltage Reverse recovery time Reverse recovery charge Reverse recovery current Reverse recovery time Reverse recovery charge Reverse recovery current ISD = 10 A, VGS=0 ISD =10 A, di/dt =100 A/s, VDD =100 V (see Figure 20) VDD =100 V di/dt =100 A/s, ISD = 10 A TJ = 150 C (see Figure 20) 340 3.26 19.2 460 4.42 19.2 Test conditions Min. Typ. Max. Unit 10 40 1.3 A A V ns C A ns C A Pulsed: pulse duration = 300s, duty cycle 1.5% 6/21 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Electrical characteristics 2.1 Figure 2. Electrical characteristics (curves) Safe operating area for TO-220 / IPAK / DPAK Figure 3. Thermal impedance for TO-220 / IPAK / DPAK Figure 4. Safe operating area for TO-220FP Figure 5. Thermal impedance for TO-220FP Figure 6. Safe operating area for DPAK / IPAK Figure 7. Thermal impedance for DPAK / IPAK 7/21 Electrical characteristics Figure 8. STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Figure 9. Transfer characteristics Output characteristics Figure 10. Transconductance Figure 11. Static drain-source on resistance Figure 12. Gate charge vs gate-source voltage Figure 13. Capacitance variations 8/21 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Figure 14. Normalized gate threshold voltage vs temperature Electrical characteristics Figure 15. Normalized on resistance vs temperature Figure 16. Source-drain diode forward characteristics Figure 17. Normalized BVDSS vs temperature 9/21 Test circuits STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N 3 Test circuits Figure 19. Gate charge test circuit Figure 18. Switching times test circuit for resistive load Figure 20. Test circuit for inductive load Figure 21. Unclamped inductive load test switching and diode recovery times circuit Figure 22. Unclamped inductive waveform Figure 23. Switching time waveform 10/21 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Package mechanical data 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect. The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 11/21 Package mechanical data STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N TO-220 mechanical data mm Dim Min A b b1 c D D1 E e e1 F H1 J1 L L1 L20 L30 P Q 4.40 0.61 1.14 0.48 15.25 1.27 10 2.40 4.95 1.23 6.20 2.40 13 3.50 16.40 28.90 3.75 2.65 3.85 2.95 0.147 0.104 10.40 2.70 5.15 1.32 6.60 2.72 14 3.93 0.393 0.094 0.194 0.048 0.244 0.094 0.511 0.137 Typ Max 4.60 0.88 1.70 0.70 15.75 Min 0.173 0.024 0.044 0.019 0.6 inch Typ Max 0.181 0.034 0.066 0.027 0.62 0.050 0.409 0.106 0.202 0.051 0.256 0.107 0.551 0.154 0.645 1.137 0.151 0.116 12/21 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Package mechanical data TO-220FP mechanical data Dim. A B D E F F1 F2 G G1 H L2 L3 L4 L5 L6 L7 Dia 28.6 9.80 2.9 15.90 9 3 mm. Min. 4.40 2.5 2.5 0.45 0.75 1.15 1.15 4.95 2.40 10 16 30.6 10.60 3.6 16.40 9.30 3.2 1.126 0.385 0.114 0.626 0.354 0.118 Typ Max. 4.60 2.7 2.75 0.70 1.00 1.50 1.50 5.20 2.70 10.40 Min. 0.173 0.098 0.098 0.017 0.030 0.045 0.045 0.195 0.094 0.393 0.630 1.204 0.417 0.141 0.645 0.366 0.126 inch Typ. Max. 0.181 0.106 0.108 0.027 0.039 0.067 0.067 0.204 0.106 0.409 A B L3 L6 L7 Dia F1 D F G1 H F2 L2 L5 E 123 L4 7012510-I G 13/21 Package mechanical data STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N DPAK (TO-263) mechanical data mm Dim Min A A1 b b2 c c2 D D1 E E1 e e1 H J1 L L1 L2 R V2 4.40 0.03 0.70 1.14 0.45 1.23 8.95 7.50 10 8.50 2.54 4.88 15 2.49 2.29 1.27 1.30 0.4 0 8 0 5.28 15.85 2.69 2.79 1.40 1.75 0.192 0.590 0.099 0.090 0.05 0.051 Typ Max 4.60 0.23 0.93 1.70 0.60 1.36 9.35 10.40 Min 0.173 0.001 0.027 0.045 0.017 0.048 0.352 0.295 0.394 0.334 inch Typ Max 0.181 0.009 0.037 0.067 0.024 0.053 0.368 0.409 0.1 0.208 0.624 0.106 0.110 0.055 0.069 0.016 8 0079457_M 14/21 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Package mechanical data IPAK (TO-262) mechanical data mm Dim Min A A1 b b1 c c2 D e e1 E L L1 L2 4.40 2.40 0.61 1.14 0.49 1.23 8.95 2.40 4.95 10 13 3.50 1.27 Typ Max 4.60 2.72 0.88 1.70 0.70 1.32 9.35 2.70 5.15 10.40 14 3.93 1.40 Min 0.173 0.094 0.024 0.044 0.019 0.048 0.352 0.094 0.194 0.393 0.511 0.137 0.050 inch Typ Max 0.181 0.107 0.034 0.066 0.027 0.052 0.368 0.106 0.202 0.410 0.551 0.154 0.055 15/21 Package mechanical data STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N TO-252 (DPAK) mechanical data DIM. A A1 A2 b b4 c c2 D D1 E E1 e e1 H L L1 L2 L4 R V2 0o 0.60 0.20 8o 4.40 9.35 1 2.80 0.80 1 6.40 4.70 2.28 4.60 10.10 mm. min. 2.20 0.90 0.03 0.64 5.20 0.45 0.48 6.00 5.10 6.60 typ max. 2.40 1.10 0.23 0.90 5.40 0.60 0.60 6.20 0068772_G 16/21 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Package mechanical data TO-251 (IPAK) mechanical data mm. DIM. A A1 b b2 b4 c c2 D E e e1 H L (L1) L2 V1 9.00 0.80 0.80 10 o 4.40 16.10 9.40 1.20 5.20 0.45 0.48 6.00 6.40 2.28 4.60 min. 2.20 0.90 0.64 typ max. 2.40 1.10 0.90 0.95 5.40 0.60 0.60 6.20 6.60 0068771_H 17/21 Packaging mechanical data STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N 5 Packaging mechanical data DPAK FOOTPRINT All dimensions are in millimeters TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 16.4 50 22.4 18.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0.795 0.645 0.724 1.968 0.881 BULK QTY 2500 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 B1 D D1 E F K0 P0 P1 P2 R W BASE QTY 2500 mm MIN. 6.8 10.4 1.5 1.5 1.65 7.4 2.55 3.9 7.9 1.9 40 15.7 16.3 inch MIN. MAX. 7 0.267 0.275 0.409 0.417 0.476 0.059 0.063 0.059 0.065 0.073 0.291 0.299 0.100 0.108 0.153 0.161 0.311 0.319 0.075 0.082 1.574 0.618 0.641 MAX. 10.6 12.1 1.6 1.85 7.6 2.75 4.1 8.1 2.1 18/21 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Packaging mechanical data D2PAK FOOTPRINT TAPE AND REEL SHIPMENT REEL MECHANICAL DATA DIM. A B C D G N T 1.5 12.8 20.2 24.4 100 30.4 26.4 13.2 mm MIN. MAX. 330 0.059 0.504 0.520 0795 0.960 1.039 3.937 1.197 BULK QTY 1000 inch MIN. MAX. 12.992 TAPE MECHANICAL DATA DIM. A0 B0 D D1 E F K0 P0 P1 P2 R T W mm MIN. 10.5 15.7 1.5 1.59 1.65 11.4 4.8 3.9 11.9 1.9 50 0.25 23.7 24.3 MAX. 10.7 15.9 1.6 1.61 1.85 11.6 5.0 4.1 12.1 2.1 inch MIN. MAX. 0.413 0.421 0.618 0.626 0.059 0.063 0.062 0.063 0.065 0.073 0.449 0.456 0.189 0.197 0.153 0.161 0.468 0.476 0.075 0.082 1.574 0.35 0.0098 0.0137 0.933 0.956 BASE QTY 1000 * on sales type 19/21 Revision history STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N 6 Revision history Table 9. Date 03-Aug-2006 14-Nov-2006 02-Oct-2007 03-Mar-2008 Document revision history Revision 1 2 3 4 First release Complete version Figure 8.: Output characteristics has been updated. Added new package (IPAK) Added new package DPAK Changes 20/21 STD11NM60N/-1 - STB11NM60N/-1 - STF11NM60N - STP11NM60N Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2008 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 21/21 |
Price & Availability of STD11NM60N-108 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |