View PL-XXD-00-S40-CX_4501210.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

COMMUNICATIONS COMpONENTS
850 nm 10 G TOSA PL-XXD-00-S40-CX
Key Features
*Dataratesupto10Gbps *-10Cto85Coperation *Opticalpowermonitorwithexcellenttracking *Multiplepinoutoptionsavailable *VCSELTO-canalignedtoLCorSCopticalhousing *OptionalflexattachtoPCBA
Benefits
* Industry standard housing dimensions * Very high reliability Low FIT High MTBF * Excellent performance over extended operational temperatures * Modulation performance verification
The JDSU 850 nm 10 Gbps connectorized TOSA product (Transmit Optical SubAssembly) is designed for high-speed data communication applications in 10 Gbps transceiver modules. The product utilizes a high performance, high reliability VCSEL integrated in a custom hermetically sealed TO package aligned to a precision LC or SC housing. The device is configured for differential drive and a controlled impedance flex circuit is available for optimum performance. Each unit receives JDSU's proprietary burn-in and stabilization process to insure a low failure rate and long life expectancy while providing continuously consistent performance. The PL-XXD-00-S40-CX converts an electrical signal into optical power at data rates up to 10 Gbps and it is designed for performance over extended operating temperature and power conditions with high reliability. It is perfectly suited for 50/125 mm multimode fiber. Each part is electro-optically tested to exacting standards.
NORTH AMERICA: 800 498-JDSU (5378)
wORlDwIDE: +800 5378-JDSU
wEBSITE: www.jdsu.com
850 NM 10 G TOSA
TOSA with Flex Dimensions (SC)
UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050
1.092 1.035 7.264 +0.050 6.731 -0.025
A
5X 1 PIN 2 PIN 3
3.124 4.6230.025
PIN 4
9010
BARREL KEYING FEATURE
1.219 5.74 +0.38 6.54 - 0.25
A
10.80
PIN 1 2.28
PIN 5
PAD 6
PAD 1 0.80 PAD PITCH 6X 1.120
OPTICAL REF PLANE
0.13 0.5
B
4.840
6.248
0.40
6.121
4X 0.92 12X 6X 0.46 SECTION A-A 4X 0.38 C L 2X 0.710 0.300
DETAIL B
pinout
pl-FxC-00-S40-C4 (5-lead TOSA, Anode drive, with flex) pad Symbol Function 1 2 3 4 5 6 APD GND ALD NC GND KPD Monitor Anode Case/GND VCSEL Anode Not Connected Case/GND Monitor Cathode
pl-FxD-00-S40-C5 (5-lead TOSA, Differential drive, with flex) pad Symbol Function 1 2 3 4 5 6 KPD GND ALD KLD GND APD Monitor Cathode Case/ GND VCSEL Anode VCSEL Cathode Case/GND Monitor Anode
pl-FxA-00-S40-C6 (5-lead-TOSA, Cathode drive, with flex) pad Symbol Function 1 2 3 4 5 6 KPD, ALD GND KLD NC GND APD Vcc, Monitor Cathode, VCSEL Anode Case/GND VCSEL Cathode Not Connected Case/GND Monitor Anode
850 NM 10 G TOSA
TOSA with Flex Dimensions (lC)
UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050
2X 5.941 6.599
+0.050 4.039- 0.025 0.660
1
A
PIN 2
PIN 3 PIN 4
2.0830.025
BARREL KEYING FEATURE
5.080+0.025 - 0.076 PIN 1 2.9210.025
0.8380.025 9010
1.270 +0.38 6.54 0.25 -
A
PIN 5 10.80
PAD 6
PAD 1 0.80 PAD PITCH
OPTICAL REF PLANE
2X 2.28
45.00.5
0.40
0.13 0.5
B
4.840
4.039
0.92
1.12
45.00.5 4.166 SECTION A-A
0.46 4X 0.38 12X 2X 0.71 0.30
DETAIL B
pinout
pl-FxC-00-S40-C4 (5-lead TOSA, Anode drive, with flex) pad Symbol Function 1 2 3 4 5 6 APD GND ALD NC GND KPD Monitor Anode Case/GND VCSEL Anode Not Connected Case/GND Monitor Cathode
pl-FxD-00-S40-C5 (5-lead TOSA, Differential drive, with flex) pad Symbol Function 1 2 3 4 5 6 KPD GND ALD KLD GND APD Monitor Cathode Case/ GND VCSEL Anode VCSEL Cathode Case/GND Monitor Anode
pl-FxA-00-S40-C6 (5-lead-TOSA, Cathode drive, with flex) pad Symbol Function 1 2 3 4 5 6 KPD, ALD GND KLD NC GND APD Vcc, Monitor Cathode, VCSEL Anode Case/GND VCSEL Cathode Not Connected Case/GND Monitor Anode
850 NM 10 G TOSA
4
5-lead TOSA without Flex Dimensions (lC)
UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050
4.039 2.083 0.025 0.838 0.025
+0.050 - 0.025 0.660 5X 13.460 PIN 5 PIN 4 2X 0.250 2X 57 PIN 1
B
2X 5.941 45 1 5.080 +0.025 - 0.076
1.397
2X 82
3X 2.921 0.025 6.599 BARREL KEYING FEATURE 1.270 +0.38 6.54 - 0.25
0.440 PIN 2 PIN 3 2.540
B
10 MAX ROTATIONAL MISALIGNMENT BETWEEN TO CAN ASSY AND BARREL
4.039
OPTICAL REF PLANE
4.166 45 1 SECTION B-B
pinout
pl-SlD-00-S40-C5 (5-lead-TOSA, Differential drive, no flex) pad Symbol Function 1 2 3 4 5 ALD KPD APD KLD GND VCSEL Anode Monitor Cathode Monitor Anode VCSEL Cathode Case/GND
850 NM 10 G TOSA
4-lead TOSA without Flex Dimensions (SC)
UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050
1.092 1.035 7.264 +0.050 6.731 -0.025 4X 13.460
A
2.540
PIN 3
PIN 4 2X 45
4.6230.025 3.124
BARREL KEYING FEATURE ( 10 MAX ROTATIONAL MISALIGNMENT BETWEEN TO CAN ASSY AND BARREL)
1.219 5.74 6.55+0.38 - 0.25 OPTICAL REF PLANE
A
PIN 2 PIN 1
2X 45
4X
0.455
6.248
6.121
pinout
pl-SxD-00-S40-C2 (4-lead TOSA, no flex) pin Symbol Function 1 2 3 4 ALD KLD APD KPD VCSEL Anode VCSEL Cathode Monitor Anode Monitor Cathode6
850 NM 10 G TOSA
4-lead TOSA without Flex Dimensions (lC)
01
P01
INITIAL RELEASE ALIGN NOTCH ROTATED 90 CW; TITLE WAS 10G 005827 006411 DWP DWP 21 AUG 06 27 SEP 06 JD SM 22 AUG 0 28 AUG 0
UNITS: MM .X = 0.2 .XX = 0.10 .XXX = 0.050 +0.050 4.039 - 0.025
10 ROTATIONAL MISALIGNMENT BETWEEN TO CAN ASSEMBLY AND BARREL
2.0830.025
0.8380.025
A
+0.025 - 0.076 2.9210.025
PIN 4 13.460.76 PIN 3 2X 45
45.00.5 5.941 5.080
2X 45 A LC BARREL ID
6.599
A
0.660 1.270 0.025 6.55 +0.37 - 0.25
PIN 2 PIN 1 2.540 4X 0.455
4.039
OPTICAL REF PLANE
45.00.5 4.166 SECTION A-A
pinout
pl-SxD-00-S40-C2 (4-lead TOSA, no flex) pin Symbol Function 1 2 3 4 ALD KLD APD KPD VCSEL Anode VCSEL Cathode Monitor Anode Monitor Cathode
Absolute Maximum Ratings
parameter Storage temperature Lead solder temperature Flex attach temperature Laser forward current at 85 C1 Laser forward current at 70 C2 Laser reverse voltage Photodiode forward current ESD3
Symbol Tst Ts TF If If BVRLD Ifm
Ratings -40 to +100 260 C for 10 sec. 2 mm from case 370 C for 10 sec. 7 8 -2 2 Class 1
Unit C
mA mA V mA
Note: Conditions exceeding those listed may cause permanent damage to the device. Devices subjected to conditions beyond the limits specified for extended periods of time may adversely affect reliability. 1. Absolute maximum at 85 C case operating temperature 2. Absolute maximum at 70 C case operating temperature 3. HBM
850 NM 10 G TOSA
Shipping Information
Shipped in anti-static stackable trays.
Electro-optical Characteristics
(Tcase = 25 C , CW operation unless otherwise stated)
parameter VCSEL Peak emission wavelength Case operating temperature RMS spectral width lp temp coefficient Relative intensity noise1 Rise/Fall time
Symbol lp Top Dl Dlp RIN12 tr tf Ith DIth Vf Rs Rs efiber h Dh/DT CLD
Test Condition
Min.
Typ.
Max.
Unit
Pout=0.5 mW Pout=0.5 mW; 10.3125Gb/s mod.
840 -10
850
860 85 0.4
nm C nm nm/C dB/Hz psec
0.06 10.3125Gb/s mod. Pout=0.5 mW, 10.3125Gb/s, 20-80%, filtered T= -10 C to 85 C Pout=0.5 mW Pout=0.5 mW Pout=0.5 mW Pout=0.5 mW 6mA bias Pout=0.5 mW 130 45 50 1 +1.0 2.0 100 60 75 -4000 0.6 7.75 -12 1.3 +2.0 2.4 110 75 0.175
Threshold current Ith temperature variation Laser forward voltage Series resistance2 Series resistance3 Coupling efficiency Slope efficiency4 Slope efficiency temperature variation Total capacitance @ VCSEL Small signal bandwidth Optical return loss MonitorPhotodiode Photocurrent Monitor current tracking5
90 50 0.105
mA mA V W W % mW/mA PPM/C pF GHz dB mA dB
IPD DIm ID CM
Monitor dark current Monitor capacitance
Pout=0.5 mW Vr = 1.5 V Pout=0.5 mW T = -10 C to 85 C Vrm = 1.5 V Vr = 1.5 V Vrm = 1.5 V
0.12 -0.25
0.6 0.25
500 50
nA pF
1. Measured according to IEEE802.3 for RIN under Modulation. 2. Applies to PL-SxD-00-S40-C2 and PL-FxD-00-S40-C5 3. Applies to PL-FxC-00-S40-C4 and PL-FxA-00-S40-C6 4. Includes connector repeatability, ferrule concentricity, and diameter (50 mm fiber). 5. For constant monitor current. Does not include the effect of fiber coupling efficiency.
850 NM 10 G TOSA
Order Information
For more information on this or other products and their availability, please contact your local JDSU account manager or JDSU directly at 1-800-498-JDSU (5378) in North America and +800-5378-JDSU worldwide or via e-mail at customer.service@jdsu.com.
Sample: pl-SSD-00-S40-C2 10 G, TOSA without Flex Circuit
part Number PL-SSD-00-S40-C PL-SLD-00-S40-C PL-SLD-00-S40-C Description DifferentialdriveTOSAwithSChousing,4leads DifferentialdriveTOSAwithLChousing,4leads DifferentialdriveTOSAwithLChousing,leads
10 G, 5-lead TOSA with Flex Circuit
part Number PL-FSC-00-S40-C4 PL-FLC-00-S40-C4 PL-FSD-00-S40-C PL-FLD-00-S40-C PL-FSA-00-S40-C PL-FLA-00-S40-C Description Anode-driveTOSAwithSChousingwithflex Anode-driveTOSAwithLChousingwithflex DifferentialdriveTOSAwithSChousingwithflex DifferentialdriveTOSAwithLChousingwithflex Cathode-driveTOSAwithSChousingwithflex Cathode-driveTOSAwithLChousingwithflex
NORTH AMERICA: 800 498-JDSU (5378)
wORlDwIDE: +800 5378-JDSU
wEBSITE: www.jdsu.com
Product specifications and descriptions in this document subject to change without notice. (c) 2008 JDS Uniphase Corporation 30149334 501 0408 PL-XXD-00-S40-CX.DS.CC.AE
April 2008

▲Up To Search▲

Price & Availability of PL-XXD-00-S40-CX

	To Download PL-XXD-00-S40-CX Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .