|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
TaNFilm(R) Small Outline Surface Mount Resistor Network GUB Series * * * * * Thin film on ceramic technology 0.220" and 0.300" sizes available RoHS compliant version available DESC 87012 and 87013 available Standard JEDEC packages for automatic placement equipment Compliant leads to compensate for thermal expansion and contractions. IRC Advanced Film Division Ultra precision tantalum nitride resistance element on high purity alumina. Rugged, molded construction. IRC's TaNFilm(R), Small Outline Integrated Circuit resistor networks are ideally suited for surface mounting. The 0.05 inch lead spacing provides higher lead density, increased component count, lower installed resistor cost, and better reliability. They are ideally suited for the latest surface mount assembly techniques, and each lead can be 100% visually inspected. The compliant leads relieve thermal expansion and contraction stressed created by soldering and temperature excursions. The tantalum nitride film system provides precision tolerance, exceptional TCR tracking, and low noise. TaNFilm(R) provides stability, high reliability, and long life characteristics. Testing has demonstrated performance exceeding MIL-PRF-83401 characteristics H. Electrical Data GM Type Resistance Range () GL Type Absolute Tolerance Ratio Tolerance To R1 TCR (ppm/C) TCR Tracking To R1 (ppmC) Operating Temperature Range Noise Substrate Custom circuits and special testing available. Schem A: 10 to 200K Schem B: 10 to 1000K Schem A: 10 to 150K Schem B: 10 to 75K Available to 0.1% Available to 0.05% 25, 50, 100 5 -55C to +125C Less than -25 dB High purity alumina substrate General Note IRC reserves the right to make changes in product specification without notice or liability. All information is subject to IRC's own data and is considered accurate at time of going to print. (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com A subsidiary of TT electronics plc GUB Series Issue November 2008 Sheet 1 of 3 TaNFilm(R) Small Outline Surface Mount Resistor Network Physical Data IRC Advanced Film Division GM7x A B C E F G J K 0.390 0.005 0.220 0.005 0.090 max 0.300 0.010 0.028 0.007 0.010 0.002 0.017 0.003 0.050 0.005 GM8x 0.440 0.005 0.220 0.005 0.090 max 0.300 0.010 0.028 0.007 0.010 0.002 0.017 0.003 0.050 0.005 GL8x 0.440 0.005 0.297 0.005 0.105 max 0.407 0.015 0.028 0.007 0.010 0.002 0.017 0.003 0.050 0.005 GL0x 0.504 0.008 0.297 0.005 0.105 max 0.407 0.015 0.028 0.007 0.010 0.002 0.017 0.003 0.050 0.005 Standard Circuits N N R1 R1 1 2 3 1 2 3 Schematic A Isolated Note: N=number of pads Schematic B Bussed (highest number pin is common) (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com GUB Series Issue November 2008 Sheet 2 of 3 TaNFilm(R) Small Outline Surface Mount Resistor Network Power Dissipation Data (watts @ 70C) Schematic A Per Resistor GM Series 14-pin GM Series 16-pin GL Series 16-pin Gl Series 20-pin 0.16W 0.16W 0.16W 0.16W Per Package 1.0W 1.2W 1.2W 1.5W IRC Advanced Film Division Schematic B Per Resistor 0.08W 0.08W 0.10W 0.10W Per Package 1.0W 1.2W 1.2W 1.5W Power Derating Curve 100 % Of Rated Power 60 0 25 70 125 Ambient Temperature (C) Ordering Data Prefix Model GM7A GM7ALF GM7B GM7BLF GM8A GM8ALF GM8B GM8BLF GL8A GL8ALF GL8B GL8BLF GL0A GL0ALF GL0B GL0BLF - 14-pin 0.220" wide body, schematic A, 60/40 Sn/Pb leads - 14-pin, 0.220" wide body, schematic A, RoHS compliant leads - 14-pin 0.220" wide body, schematic B, 60/40 Sn/Pb leads - 14-pin, 0.220" wide body, schematic B, RoHS compliant leads - 16-pin 0.220" wide body, schematic A, 60/40 Sn/Pb leads - 16-pin, 0.220" wide body, schematic A, RoHS compliant leads - 16-pin 0.220" wide body, schematic B, 60/40 Sn/Pb leads - 16-pin, 0.220" wide body, schematic B, RoHS compliant leads - 16-pin 0.300" wide body, schematic A, 60/40 Sn/Pb leads - 16-pin, 0.300" wide body, schematic A, RoHS compliant leads - 16-pin 300" wide body, schematic B, 60/40 Sn/Pb leads - 16-pin, 0.300" wide body, schematic B, RoHS compliant leads - 20-pin 0.300" wide body, schematic A, 60/40 Sn/Pb leads - 20-pin, 0.300" wide body, schematic A, RoHS compliant leads - 20-pin 0.300" wide body, schematic B, 60/40 Sn/Pb leads - 20-pin, 0.300" wide body, schematic B, RoHS compliant leads GUB - GM8A - 03 - 2001 - B - A TCR Code (ppm/C) Resistance code 01 = 100; 02 = 50; 03 = 25 Standard MIL resistance code (e.g. 1002 = 10K; 50R1=50.1) Absolute tolerance J = 5%; G = 2%; F = 1%; D = 0.5%; C = 0.25%; B = 0.10% Ratio tolerance to R1 (if specified) F = 1%; D = 0.5%; C = 0.25%; B = 0.1%; A = 0.05% (c) IRC Advanced Film Division * 4222 South Staples Street * Corpus Christi Texas 78411 USA Telephone: 361 992 7900 * Facsimile: 361 992 3377 * Website: www.irctt.com GUB Series Issue November 2008 Sheet 3 of 3 |
Price & Availability of GUB-GM7A-01-2001-B |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |