 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Oscilent Corporation IF SAW Filter | 813-SL140.0M-05 Page 1 of 2 IF SAW Filter Part Number Package Application Last Modified 813-SL140.0M-05 . TYPE : 13.3 x 6.5 SMD Base Station & Repeater Apr 18, 2007 140.0 MHz Bandpass Filter Low Loss Narrow Bandwidth PART NUMBER : 813-SL140.0M-05 .. OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Center Frequency Insertion Loss at Fo Source Impedance (single ended)* Load Impedance (single ended)* Bandwidth at -1.0 dB Bandwidth at -3.0 dB Bandwidth at -40.0 dB Bandwidth at -45.0 dB Relative Attenuation: Lower Sidelobe Upper Sidelobe Amplitude Ripple Group Delay Variation Absolute Delay at Fo Temperature Coefficient Minimum 139.85 4.0 4.8 45 45 Typical 140.0 10.5 50 50 4.3 5.08 7.7 7.85 50 50 0.3 50 0.94 -94 Maximum 140.15 12.0 7.9 8.1 1.0 100 Units MHz dB ohm ohm MHz MHz MHz MHz dB dB dBp-p nsec sec ppm/C *With Matching Network (Reference Testing Environment Circuit as shown) Modifiy Impedance Values as necessary. . PACKAGE OUTLINE (mm) TEST FIXTURE Oscilent Corporation IF SAW Filter | 813-SL140.0M-05 Page 2 of 2 PIN Description: IN-11,OUT-5, GROUND-1,2,3,4,6,7,8,9,10,12 L1 = L2 = 47nH 47nH C1 = 43pF C2 = 43pF Source/Load Impedance = 50 ohms FREQUENCY RESPONSE Part No.: 813-SL140.0M-05 Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map |
Price & Availability of 813-SL1400M-05
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |