![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PROPRIETARY NOTE THIS SPECIFICATION IS THE PROPERTY OF BOE HYDIS AND SHALL NOT BE REPRODUCED OR COPIED WITHOUT THE WRITTEN PERMISSION OF BOE HYDIS AND MUST BE RETURNED TO BOE HYDIS UPON ITS REQUEST TITLE : HV056WX1-100 Preliminary Product Specification Rev. P0 FOR MORE INFORMATION: AZ DISPLAYS, INC. 75 COLUMBIA, ALISO VIEJO, CA, 92656 Http://www.AZDISPLAYS.com BOE HYDIS TECHNOLOGY SPEC. NUMBER S864-1338 B2005-C001-A (1/3) PRODUCT GROUP TFT LCD REV. P0 ISSUE DATE 2008.01.30 PAGE 1 OF 29 A4(210 X 297) PRODUCT GROUP TFT LCD PRODUCT REV P0 ISSUE DATE 2008.01.30 REVISION HISTORY REV. P0 ECN NO. DESCRIPTION OF CHANGES Initial Release DATE 08.01.30 PREPARED Y.J. Yoon SPEC. NUMBER S864-1338 B2005-C001-A (2/3) SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE 2 OF 29 A4(210 X 297) PRODUCT GROUP TFT LCD PRODUCT REV P0 ISSUE DATE 2008.01.30 Contents No REVISIONS HISTORY CONTENTS 1 GENERAL DESCRIPTION 1.1 Introduction 1.2 Features 1.3 Applications 1.4 General Specification 2 3 4 ABSOLUTE MAXIMUM RATINGS OPTICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS 4.1 TFT LCD Module 4.2 Back-Light Unit 4.3 PWM Duty Ratio vs Brightness 5 INTERFACE CONNECTION 5.1 Electrical Interface Connection 5.2 LVDS Interface 5.3 Data Format 6 SIGNAL TIMING SPECIFICATIONS 6.1 Timing Parameter of TFT LCD Module Input Signal 6.2 Timing Waveform of TFT LCD Module Input Signal 6.3 LVDS Rx Interface Timing Parameters 6.4 Input Signals, Basic Display Colors & Cray Scale Of Colors 6.5 Power Sequence 7 8 9 10 11 12 MECHANICAL CHARACTERISTICS RELIABLITY PRODUCT SERIAL NUMBER PACKING HANDING & CAUTIONS APPENDIX 19 21 22 23 25 26 15 12 6 7 9 ITEM Page 2 3 4 SPEC. NUMBER S864-1338 B2005-C001-A (3/3) SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE 3 OF 29 A4(210 X 297) PRODUCT GROUP TFT LCD PRODUCT 1.0 GENERAL DESCRIPTION REV P0 ISSUE DATE 2008.01.30 1.1 Introduction HV056WX1-100 is a color active matrix TFT LCD module using amorphous silicon TFT's (Thin Film Transistors) as an active switching devices. This module has a 5.6 inch diagonally measured active area with WXGA resolutions (1280 horizontal by 800 vertical pixel array). Each pixel is divided into RED, GREEN, BLUE dots which are arranged in vertical stripe and this module can display 262,144 colors. The TFT-LCD panel used for this module is adapted for a low reflection and higher color type. SPEC. NUMBER S864-1338 B2005-C001-A (3/3) SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE 4 OF 29 A4(210 X 297) PRODUCT GROUP TFT LCD PRODUCT REV P0 ISSUE DATE 2008.01.30 1.2 Features High Resolution & Wide View (HFFS Technology) 3.3 V Logic Power & 12V LED Power Supply 1 Channel LVDS Interface 262,144 Colors Low Weight (Slimming Glass & Slim LGP LED Backlight Technology) Compact Design (Source & Gate IC of the COG Type) Green Product (RoHS Compliant) 1.3 Applications Display terminals for Ultra Mobility Personal Computer. 1.4 General Specification The followings are general specification at the model HV056WX1-100. < Table 1. General Specification > Parameter Active area Number of pixels Pixel pitch Pixel arrangement Display colors Display mode Dimensional outline Weight Back-light Specification 120.96(H) x 75.60(V) 1280(H) x 800(V) 94.5(H) x 94.5(V) RGB Vertical stripe 262,144 Normally Black 131.70.4(H)x87.70.4(V)x4.70.3(T) TBD (Typ.) Unit mm pixels um Remarks colors mm gram White LED Bottom edge side, 16-LEDs type SPEC. NUMBER S864-1338 B2005-C001-A (3/3) SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE 5 OF 29 A4(210 X 297) PRODUCT GROUP TFT LCD PRODUCT 2.0 ABSOLUTE MAXIMUM RATINGS REV P0 ISSUE DATE 2008.01.30 The followings are maximum values which, if exceed, may cause faulty operation or damage to the unit. The operational and non-operational maximum voltage and current values are listed in Table 2. [VSS=GND=0V] < Table 2. Absolute Maximum Ratings > Parameter Logic Power Supply Back-light Power Supply Back-Light LED Reverse Voltage + 25 Back-light LED Current Operating Temperature Storage Temperature + 50 Symbol VDD HVDD VR ILED ILED TOPR TSTG Min. VSS-0.3 -0.3 0 -20 Max. 5.0 40.0 5 30 20 60 70 Unit V V V mA Note 1 mA Note 1, 2 Remarks Ta = 25 Note : 1. Ambient temperature vs allowable forward current are shown in the figure below. 2. Temperature and relative humidity range are shown in the figure below. 90% RH Max. ( 40 Ta) Maximum wet - bulb temperature at 39 or less. ( > 40) No condensation. Relative Humudity 100 90 80 (40, 90) 60 Operating Range (50, 50) 40 (60, 27) 20 5 -40 -20 0 20 40 60 80 Storage Range Temperature () SPEC. NUMBER S864-1338 B2005-C001-A (3/3) SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE 6 OF 29 A4(210 X 297) PRODUCT GROUP TFT LCD PRODUCT 3.0 OPTICAL SPECIFICATION REV P0 ISSUE DATE 2008.01.30 The test of Optical specification shall be measured in a dark room (ambient luminance 1 lux and temperature = 252) with the equipment of Luminance meter system (Goniometric system and TOPCON BM-5) and test unit shall be located at an approximate distance 50cm from the LCD surface at a viewing angle of and equal to 0. We refer to O=0 (=3 ) as the 3 o'clock direction (the "right"), O=90 (= 12 ) as the 12 o'clock direction ("upward"), O=180 (= 9 ) as the 9 o'clock direction ("left") and O=270(= 6 ) as the 6 o'clock direction ("bottom"). While scanning and/or O, the center of the measuring spot on the Display surface shall stay fixed. The backlight should be operating for 30 minutes prior to measurement. < Table 3. Optical Specifications > Parameter Viewing Angle Horizontal Symbol Condition 3 9 12 6 CR Yw Y9 = 0 Min 80 80 Typ 85 85 85 85 500 Max - Unit Deg. Deg. Remark CR > 10 80 80 - Note 1 Deg. Deg. Note 2 cd/m2 Vertical Contrast ratio Luminance of White White Luminance uniformity White 250 75 300 TBD TBD - % Note 4,5 Wx Wy Rx Ry Red Reproduction of color Green Gx Gy = 0 (Center) Normal Viewing Angle TBD TBD Note 3 TBD TBD TBD TBD Blue Response Time (Tr + Td) Cross Talk SPEC. NUMBER S864-1338 B2005-C001-A (3/3) Bx By Ta= 25 C CT = 0 - 30 2.0 ms % Note 6 Note 7 PAGE 7 OF 29 A4(210 X 297) SPEC TITLE HV056WX1-100 Preliminary Product Specification PRODUCT GROUP TFT LCD PRODUCT Note : REV P0 ISSUE DATE 2008.01.30 1. Viewing angle is the angle at which the contrast ratio is greater than 10. The viewing are determined for the horizontal or 3, 9 o'clock direction and the vertical or 6, 12 o'clock direction with respect to the optical axis which is normal to the LCD surface. (see Figure1 in Appendix). 2. Contrast measurements shall be made at viewing angle of = 0 and at the center of the LCD surface. Luminance shall be measured with all pixels in the view field set first to white, then to the dark (black) state. (See Figure 1 in Appendix) Luminance Contrast Ratio (CR) is defined mathematically as CR = Luminance when displaying a white raster / Luminance when displaying a black raster. 3. Reference only / Standard Front Surface Treatment Measured with green cover glass. The color chromaticity coordinates specified in Table 3 shall be calculated from the spectral data measured with all pixels first in red, green, blue and white. Measurements shall be made at the center of the panel. 4. The White luminance uniformity on LCD surface is then expressed as : Y = ( Minimum Luminance of 9 points / Maximum Luminance of 9 points ) * 100 (See Figure 2 shown in Appendix). 5. The electro-optical response time measurements shall be made as Figure 3 shown in Appendix by switching the "data" input signal ON and OFF. The times needed for the luminance to change from 10% to 90% is Tr, and 90% to 10% is Td. 6. Cross-Talk of one area of the LCD surface by another shall be measured by comparing the luminance (YA) of a 25mm diameter area, with all display pixels set to a gray level, to the luminance (YB) of that same area when any adjacent area is driven dark (Refer to Figure 5 in Appendix) Cross-Talk (%) = YB - YA YB x 100 SPEC. NUMBER S864-1338 B2005-C001-A (3/3) SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE 8 OF 29 A4(210 X 297) PRODUCT GROUP TFT LCD PRODUCT 4.0 ELECTRICAL SPECIFICATION 4.1 TFT LCD Module < Table 4. LCD Module Electrical Specification > Values Parameter Logic Power Supply Window XP Power Consumption Vsync Frequency Hsync Frequency Main Clock Frequency High Level Differential Input Signal Low Level Differential Input Signal Note : Vertical Sub Line EBL Symbol Min VDD PTYP PMAX PEBL fV fH fclk VIH VIL - 100 3.0 Typ 3.3 TBD TBD TBD 60 49.2 71.1 75 REV P0 ISSUE DATE 2008.01.30 [Ta =252 ] Unit Remark Max 3.6 V mW mW mW Hz KHz MHz + 100 mV mV VCM =1.2V Note 1 1. The supply voltage is measured and specified at the interface connector of LCM. The current draw and power consumption specified is for 3.3V at 25. a) Typ : Window XP pattern, b) Max : Vertical Sub line pattern c) EBL : Mosaic pattern ( 32 X 32 ) SPEC. NUMBER S864-1338 B2005-C001-A (3/3) SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE 9 OF 29 A4(210 X 297) PRODUCT GROUP TFT LCD PRODUCT 4.2 Back-Light Unit < Table 5. Back-Light Unit Electrical Specification > Values Parameter Back-Light Power Supply Power Consumption LED Driver's Efficiency Back-light PWM Frequency High Level PWM Signal Voltage Low Level PWM Signal Voltage Back-light LED Voltage / Back-light LED Total Voltage Back-light LED Current / Back-light LED Total Current Life Time Note : Symbol Min HVDD PBL FPWM VPWMH VPWML VLED /VBL ILED /IBL 100 1.4 0 4.5 Typ 12.0 TBD 85 200 3.3 / 26.4 15 / 30 1000 5.0 0.2 Max 16.0 REV P0 ISSUE DATE 2008.01.30 [Ta =252 ] Unit V mW % V V V Note 4 Note 1, 4 Note 2 Remark 10,000 mA Hrs Note 4 By LED 1. The power supply voltage and current is measured and specified at the interface connector of LCM including LED Driver. 2. Reference value, which is measured with LED Driver for 12V. 3. Reference value, which is measured without LED Driver. 4. Calculated value for reference (VLED x ILED x # of LEDs (16EA) ). SPEC. NUMBER S864-1338 B2005-C001-A (3/3) SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE 10 OF 29 A4(210 X 297) PRODUCT GROUP TFT LCD PRODUCT 4.3 PWM Duty Ratio vs Brightness REV P0 ISSUE DATE 2008.01.30 Note : In case of duty ratio 0%, LED can't illuminate itself so this state is LED off. In case of duty ratio 100%, the brightness of LED is maximum and the state is LED on. SPEC. NUMBER S864-1338 B2005-C001-A (3/3) SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE 11 OF 29 A4(210 X 297) PRODUCT GROUP TFT LCD PRODUCT 5.0 INTERFACE CONNECTION. REV P0 ISSUE DATE 2008.01.30 5.1 Electrical Interface Connection < Table 6. Electrical Interface Connection Specification > (CN1 :20347-025E-02, I-PEX) Pin No Symbol 1 2 3 4 5 6 7 8 9 10 11 12 13 Note : 1. NC : This pins are only used for BOE HYDIS internal operations 2. Start from left side Rear view of LCM 1 20347-024E-02 250 Description Back-light Power Supply Back-light Power Supply No Connection Pin No Symbol 14 15 16 17 18 19 20 21 22 23 24 25 IN1+ IN2IN2+ CLKCLK+ GND TEST GND NC VDD VDD VDD Description LVDS Receiver Signal (+) LVDS Receiver Signal (-) LVDS Receiver Signal (+) LVDS Receiver Clock Signal(-) LVDS Receiver Clock Signal(+) Ground TEST PIN GROUND NON-CONNECTION Logic Power Supply Logic Power Supply Logic Power Supply LEDVDD LEDVDD NC LED GND Back-light Ground LED GND Back-light Ground PWM PWM Brightness Control ON/OFF LED Drive ON/OFF GND GND GND IN0IN0+ IN1GROUND GROUND GROUND LVDS Receiver Signal (-) LVDS Receiver Signal (+) LVDS Receiver Signal (-) SPEC. NUMBER S864-1338 B2005-C001-A (3/3) SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE 12 OF 29 A4(210 X 297) PRODUCT GROUP TFT LCD PRODUCT 5.2 LVDS Interface REV P0 ISSUE DATE 2008.01.30 < Table 7. LVDS Interface Specification > [LVDS Transmitter : THC63LVDM83A] Input signal R0 R1 R2 R3 R4 R5 G0 G1 G2 G3 G4 G5 B0 B1 B2 B3 B4 B5 HSYNC VSYNC DE MCLK Transmitter Pin No 51 52 54 55 56 3 4 6 7 11 12 14 15 19 20 22 23 24 27 28 30 31 40 39 SPEC. NUMBER S864-1338 B2005-C001-A (3/3) CLKOUTCLKOUT+ CLKINCLKIN+ 17 18 PAGE 13 OF 29 A4(210 X 297) 42 41 OUT2OUT2+ IN2IN2+ 15 16 46 45 OUT1OUT1+ IN1IN1+ 13 14 48 47 OUT0OUT0+ IN0IN0+ 11 12 Pin No Interface System (Tx) TFT-LCD (Rx) 20347-024E-02 Pin No. Remark SPEC TITLE HV056WX1-100 Preliminary Product Specification PRODUCT GROUP TFT LCD PRODUCT 5.3 Data Input Format ODD (1,1) EVEN (2,1) REV P0 ISSUE DATE 2008.01.30 (1279,1) (1280,1) RGBRGB RGBRGB 1 Pixel = 3 Dots RGB RGBRGB (1,800) (2, 800) RGBRGB (1279,800)(1280,800) Display Position of Input Data (V-H) SPEC. NUMBER S864-1338 B2005-C001-A (3/3) SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE 14 OF 29 A4(210 X 297) PRODUCT GROUP TFT LCD PRODUCT 6.0 SIGNAL TIMING SPECIFICATION REV P0 ISSUE DATE 2008.01.30 6.1 Timing Parameters of TFT LCD Module Input Signal < Table 8. Input Timing Parameters Specification > [ DE only, VDD=3.3V, GND=0V, TA=25] Parameter Frame Period Vertical Display Period One line Scanning Period Horizontal Display Period Clock Frequency Symbol T1 T2 T3 T4 1/T5 Min 810 1350 Typ 823 800 1440 1280 71.1 Max Unit Lines Lines Clocks Clocks MHz Note 6.2 Timing Waveforms of TFT LCD Module Input Signal T1 T2 DE T3 DCLK T5 T4 DE DATA SIGNALS Valid display data (1280 Clocks) SPEC. NUMBER S864-1338 B2005-C001-A (3/3) SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE 15 OF 29 A4(210 X 297) PRODUCT GROUP TFT LCD PRODUCT 6.3 LVDS Rx Interface Timing Parameter The specification of the LVDS Rx interface timing parameter REV P0 ISSUE DATE 2008.01.30 < Table 9. LVDS Rx Interface Timing Specification> Item CLKIN Period Input Data 0 Input Data 1 Input Data 2 Input Data 3 Input Data 4 Input Data 5 Input Data 6 Symbol tRICP tRIP0 tRIP1 tRIP2 tRIP3 tRIP4 tRIP5 tRIP6 Min. 12.50 -0.4 tRICP/7-0.4 Typ. 14.43 0.0 tRICP/7 Max. 25.00 +0.4 tRICP/7+0.4 2 xtRICP/7+0.4 3 xtRICP/7+0.4 4 xtRICP/7+0.4 5 xtRICP/7+0.4 6 xtRICP/7+0.4 Unit nsec nsec nsec nsec nsec nsec nsec nsec Remarks 2 xtRICP/7-0.4 2 xtRICP/7 3 xtRICP/7-0.4 3 xtRICP/7 4 xtRICP/7-0.4 4 xtRICP/7 5 xtRICP/7-0.4 5 xtRICP/7 6 xtRICP/7-0.4 6 xtRICP/7 tRIP6 tRIP5 tRIP4 tRIP3 tRIP2 tRIP1 tRIP0 RxINz +/* Z = 0, 1, 2 RxCLKIN+/Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Rx Vdiff=0[v] tRICP Vdiff=0[v] SPEC. NUMBER S864-1338 B2005-C001-A (3/3) SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE 16 OF 29 A4(210 X 297) PRODUCT GROUP TFT LCD PRODUCT REV P0 ISSUE DATE 2008.01.30 6.4 Input Signals, Basic Display Colors & Gray Scale Of Colors Each color is displayed in sixty-four gray scales from a 6 bit data signal input. A total of 262,144 colors are derived from the resultant 18 bit data. Colors & Gray Scale Black Blue Green Basic Cyan Colors Red Magenta Yellow White Black Darker Gray Scale Of Red Brighter Red Black Darker Gray Scale Of Green Brighter Green Black Darker Gray Scale Of Blue Brighter Blue Black Gray Darker Scale Of White & Brighter Black White Red Data R5 R4 R3 R2 R1 R0 G5 Green Data 0 0 0 0 1 1 1 1 0 0 1 0 0 0 0 1 1 1 1 0 1 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0 Blue Data 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0 0 1 0 1 0 1 0 1 0 0 0 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 0 0 0 0 1 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 0 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 1 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 1 1 0 0 1 1 0 1 0 1 0 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 0 1 1 1 1 1 1 1 1 1 1 1 1 1 0 1 1 1 0 1 SPEC. NUMBER S864-1338 B2005-C001-A (3/3) SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE 17 OF 29 A4(210 X 297) PRODUCT GROUP TFT LCD PRODUCT REV P0 ISSUE DATE 2008.01.30 6.5 Power Sequence To prevent a latch-up or DC operation of the LCD module, the power on/off sequence shall be as shown in below 0.9VDD 0.1VDD 0.9VDD Power Supply 0V 0.1VDD T1 T2 Valid 0V T5 T6 Interface Signal ( Input Data ) T3 T4 BLU On/Off 0V Parameter T1 T2 T3 T4 T5 T6 Note : Values Min 0.5 0.5 200 200 0.5 3.0 Typ Max 10 50 50 - Units ms ms ms ms ms s 1. When the power supply VDD is 0V, Keep the level of input signals on the low or keep high impedance. 2. Do not keep the interface signal high impedance when power is on. 3. Back Light must be turn on after power for logic and interface signal are valid. SPEC. NUMBER S864-1338 B2005-C001-A (3/3) SPEC TITLE HV056WX1-100 Preliminary Product Specification PAGE 18 OF 29 A4(210 X 297) PRODUCT GROUP TFT LCD PRODUCT 7.0 MECHANICAL CHARACTERISTICS REV P0 ISSUE DATE 2008.01.30 7.1 Dimensional Requirements Figure 5 (located in Appendix) shows mechanical outlines for the model HV056WX1-100. Other parameters are shown in Table 10.
|