 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| CHINA SEMICONDUCTOR CORPORATION Spec. No. PS-LU-N32DSB4-A0R A Rev. PRODUCT SPECIFICATION Model NoCSPR-N32DSB4-A0R LED Type : Superbright Lamp LED Package : Piranha LED Lamp Emitting ColorBlue Viewing Angle90 Stopper CUSTOMER APPROVED SIGNATURES APPROVED BY CHINA SEMICONDUCTOR CORPORATION Address:2FL. NO.909,Chung-Cheng Road, Chung-Ho City Taipei Hsien,Taiwan. Tel:886-2-2223-9696 Fax:886-2-2223-9377 Descriptions: CHECKED BY PREPARED BY OPTO PLUS TECHNOLOGIES CO.,LTD Address:696 Shun jiang Rd.,Ji Shan St.Shaoxing, ZheJiang,China Tel:86-0575-88623888 Fax:86-0575-88623112 http://www.csctw.com.tw CHINA SEMICONDUCTOR CORPORATION Model NoCSPR-N32DSB4-A0R Features 1. High Current Operation 2. High Luminous Output 3. High Reliability and Solid Performance 4. Optimal Optical/Mechanical Design Spec. No. PS-LU-N32DSB4-A0R A Rev. 5. Packaged in Tubes for Use with Automatic Pick and Place Equipment 6. Rohs Compliant Device Selection Guide Chip Package Outline Dimensions - Tolerance 0.25 Part No. Material CSPR-N32DSB4-A0R LED Lens Emitted Color Blue Water Transparent InGaN 0.01 Unit inch mm http://www.csctw.com.tw Page 1/5 CHINA SEMICONDUCTOR CORPORATION Model NoCSPR-N32DSB4-A0R Absolute Maximum Rating - Spec. No. PS-LU-N32DSB4-A0R Rev. A Storage Temp. Tstg Tsol 1/10 -40 ~ +100 Lead Soldering Temperature Max. 260 for 5 sec Max. (3mm from the epoxy bulb) Electro-optical Characteristics (Ta=25) Parameter Forward Voltage Luminous Intensity Luminous Flux Dominant Wavelength Symbol VF IV v d p Peak Wavelength Viewing Angle Reverse Current 2 1/2 IR http://www.csctw.com.tw * Pulse width 0.1 msec. duty Min. ----640 600 ----------------- Typ. 3.3 1200 800 470 465 90 ----- Max. 3.8 ---------------------100 Unit V mcd mlm nm nm deg A VR=5V (Ta=25) Parameter Power Dissipation Forward Current (DC) Peak Forward Current * Reverse Voltage Operating Temp. Symbol Pd IF IFP VR Topr Rating 190 50 100 5 -30 ~ +80 Unit mW mA mA V Condition IF=50mA Page 2/5 CHINA SEMICONDUCTOR CORPORATION Luminous Flux Rank Limits ( IF = 50mA ) unitmlm Part No.CSPR-N32DSB4-A0R Code Spec. No. PS-LU-N32DSB4-A0R A Rev. 1. 2. 3. 4. 5. 6. 7. A B C H I min. 600 1000 1500 max. 1000 1500 2000 Dominant Wavelength Rank Limits ( IF = 50mA ) unitnm Part No. CSPR-N32DSB4-A0R Code min. max. B5 B6 B7 460 465 470 465 470 475 Forward Voltage Rank Limits ( IF = 50mA ) unitv Part No. CSPR-N32DSB4-A0R Code min. 2.8 3.0 3.2 3.4 3.6 max. 3.0 3.2 3.4 3.6 3.8 H J K L M Notes: Tolerance of measurement of luminous Flux :15 Tolerance of measurement of dominant wavelength :2nm Tolerance of measurement of forward voltage :0.05v All data are measured by CSC's test equipment. One delivery will include several color rank, VF rank and Iv ranks of the products. The quantity-ratio of the ranks is decided by CSC. Please confirm with CSC salesman,if your request different form standard specification. http://www.csctw.com.tw Page 3/5 CHINA SEMICONDUCTOR CORPORATION Model NoCSPR-N32DSB4-A0R Typical Electrical / Optical Charateristics Curves (Ta = 25 Unless Otherwise Noted) 40 Spec. No. PS-LU-N32DSB4-A0R Rev. A Forward Current (mA DC) Forward Current (mA DC) 30 20 10 150 125 100 75 50 25 0 5 10 15 20 25 30 Forward Current (mA) Relative Intensity (%) Forward Current IF (mA DC) Fig 3. Relative Intensity Vs. Forward Current Vs. Forward Current 100 Relative Intensity (%) 75 50 25 0 380 430 480 530 580 630 680 Fig 5. Relative Intensity Vs. Wavelength 0 30 25 20 15 10 5 0 1 2 3 4 25 50 75 100 Ambient Temperature Ta (C) Forward Voltage VF (V) Fig 1. Forward Current Vs. Ambient Temperature Vs. Ambient Temperature 100 75 50 25 Fig 2.Fig 2. Forward Current Forward Current Vs. Forward Voltage 0 1 2 3 4 5 6 Forward Voltage (V) Fig 4. Fig 4. Peark Forward Voltage Peark Forward Voltage Vs.Forward Current Vs.Forward Current (100us test pulse,1% duty cycle) Wavelength (nm) Fig 6. Relative Luminous Intensity vs.Radiation Angle http://www.csctw.com.tw Page 4/5 CHINA SEMICONDUCTOR CORPORATION Model NoCSPR-N32DSB4-A0R Precautions For Use 1. Recommended Soldering conditions Wave Soldering Spec. No. PS-LU-N32DSB4-A0R A Rev. Temperature(C) be shorter (+10 -1sec.). Power dissipation of iron should be smaller than 15W , and temperature should be controllable. Surface temperature of the device should be under 230. 3. Static Electricity a. Static electricity or surge voltage damages LEDs.. It is recommended that a wrist band or an anit-electrostatic glove be used when handling the LEDs. b. All devices, equipment and machinery must be properly grounded. It is recommended that mesures be taken against surge voltage to the equipment that mounts the LEDs. Note: The specifications are subject to change without notice. Please contact us for updated information. http://www.csctw.com.tw 260(max.) 250 240 Preheat 105(max.) 0 Max. 60sec. Time(sec.) 5 sec. 2. Soldering Iron Basic SPEC. is 5sec. When 260. If temperature is higher, time should Page 5/5 |
Price & Availability of CSPR-N32DSB4-A0R
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |