View FTM-3012S-G20G_4565054.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

June ,15 2006
1.06251.25Gbps GBIC Transceiver
(Up to 20km transmission, RoHS compliant)
Members Of FlexonTM Family
Standard
Compatible Compatible Channel Compatible with IEEE 802.3z Compatible with IEEE 802.3ah Compatible with FCC 47 CFR Part 15, Class B Compatible with FDA 21 CFR 1040.10 and 1040.11, Class I with GBIC specification
(SFF-8053), Rev 5.5 with ANSI specification for Fibre
Features
1.0625~1.25Gbps multi-rate 1310nm FP laser transmitter. 2m~10km with 9/125m SMF for FTM-3012S-GG 2m~20km with 9/125m SMF for FTM-3012S-G20G 550m with 50/125 m MMF 550m with 62.5/125 m MMF Class I laser product Low EMI and excellent ESD protection Duplex SC optical interface Extended power supply +3.3/5.0V compatibility Standard serial ID information compatible with SFF-8053 Operating case temperature: 0 to +70C
RoHS Compliant
Description
Fiberxon 1.0625~1.25Gbps GBIC transceivers are high performance, cost effective modules. They are designed for Gigabit Ethernet and 1x Fibre Channel applications from 10km to 20km.
The transceiver consists of two sections: The transmitter section incorporates a highly reliable FP laser. And the receiver section consists of a PIN photodiode mounted together with a trans-impedance preamplifier (TIA). All modules satisfy Class I Laser Safety requirements.
The standard serial ID information compatible with GBIC MSA describes the transceiver's capabilities, standard interfaces, manufacturer and other information. The host equipment can access this
Applications
Switch to Switch interface Switched backplane applications Router/Server interface Other optical transmission systems
information via the 2-wire serial CMOS EEPROM protocol. For further information, please refer to SFF-8053. Fiberxon's FTM-3012S-GxxG transceiver series are compliant with RoHS
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 1 of 1 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM
1.25G GBIC Transceiver Up to 20 km transmission, RoHS compliant June ,15 2006
Regulatory Compliance
The transceivers have been tested according to American and European product safety and electromagnetic compatibility regulations (See Table 1). For further information regarding regulatory certification, please refer to FlexonTM regulatory specification and safety guidelines, or contact with Fiberxon, Inc. America sales office listed at the end of the documentation.
Table 1 - Regulatory Compliance Feature Standard Performance
Electrostatic Discharge (ESD) to the Electrical Pins Electrostatic Discharge (ESD) to the Duplex LC Receptacle Electromagnetic Interference (EMI) Immunity Laser Eye Safety Component Recognition RoHS
MIL-STD-883E Method 3015.7 IEC 61000-4-2 GR-1089-CORE FCC Part 15 Class B EN55022 Class B (CISPR 22B) VCCI Class B IEC 61000-4-3 FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 UL and CSA 2002/95/EC 4.1&4.2
Class 1(>500 V)
Compatible
with standards
Compatible
with standards
Compatible with standards
Compatible product.
with Class I laser
Compliant with standards Compliant with standards
Absolute Maximum Ratings
Absolute Maximum Ratings are those values beyond which damage to the devices may occur.
Table 2 - Absolute Maximum Ratings Parameter Symbol Min. Max. Unit
Storage Temperature Supply Voltage Operating Humidity
TS VCC -
-40 -0.5 5
+85 6 95
C V %
Recommended Operating Conditions
Table 3 - Recommended Operating Conditions Parameter Symbol Min. Typical Max. Unit
Operating Case Temperature Power Supply Voltage Power Supply Current Data Rate
TC VCC ICC
0 3.1 1.0625/1.25
+70 5.5 300
C V mA Gbps
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 2 of 2 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM
1.25G GBIC Transceiver Up to 20 km transmission, RoHS compliant June ,15 2006
FTM-3012S-GG (1310nm FP and PIN, 10km)
Table 4 -Optical and Electrical Characteristics Parameter Symbol Min. Transmitter Typical Max. Unit Notes
Centre Wavelength Average Output Power Spectral Width (RMS) Extinction Ration P0ut @TX Disable Asserted Rise/Fall Time (20%80%) Total Jitter Deterministic Jitter 1.25G 1.0625G 1.25G 1.0625G
C P0ut EX tr/tf TJ DJ
1260 -9.5 9
1310
1360 -3 4 -45 0.26 0.431 0.43 0.2 0.21
nm dBm nm dB
dBm
1
1 2
ns
UI
3 UI 4 mV V V V V nm dBm dBm dB 6 5
Output Optical Eye Data Input Swing Differential Input Differential Impedance TX Disable TX Fault Disable Enable Fault Normal C ZIN
IEEE 802.3z and ANSI Fibre Channel compatible VIN 200 140 2.0 0 Host_VCC-0.5 0
Receiver
1660 150 160 Vcc+0.3 0.8 Host_Vcc+0.3 0.5 1310 1650 -20
Centre Wavelength Receiver Sensitivity Receiver Overload Return Loss
LOS De-Assert
1200 -3 12
LOSD LOSA
-21 -35 1
4
dBm dBm dB mV UI 3 UI V V 5
LOS Assert LOS Hysteresis Data Output Swing Differential Total Jitter Deterministic Jitter LOS 1.25G 1.0625G 1.25G 1.0625G High Low
VOUT TJ DJ
370
2000 0.749 0.61 0.462 0.36
Host_VCC-0.5 0
Host_Vcc+0.3 0.5
Note: 1. The optical power is launched into SMF. 2. Unfiltered, measured with a PRBS 27-1 test pattern @1.25Gbps 3. Measured with a PRBS 27 -1 test pattern@1.25Gbps/1.0625Gbps, meet the specified maximum output jitter requirements if the specified maximum input jitter is present.
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 3 of 3 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM
1.25G GBIC Transceiver Up to 20 km transmission, RoHS compliant June ,15 2006
4. 5. 6.
Measured with a PRBS 27 -1 test pattern@1.25Gbps/1.0625Gbps. AC coupled and terminated. Worst-case Extinction Ration, measured with a PRBS 27 -1 test pattern @1.25Gbps, BER1x 10-12.
FTM-3012S-G20G (1310nm FP and PIN, 20km)
Table 5 -Optical and Electrical Characteristics Parameter Symbol Min. Transmitter Typical Max. Unit Notes
Centre Wavelength Average Output Power Spectral Width (RMS) Extinction Ration
P0ut@TX Disable Asserted
C P0ut EX tr/tf TJ DJ
1270
-8
1310
2
1355 -3 4
-45
nm dBm nm dB
dBm 1
1
9 0.26 0.431 0.43 0.2 0.21 IEEE 802.3z and ANSI Fibre Channel compatible 200 140 2.0 0 Host_VCC-0.5 0
Receiver
Rise/Fall Time (20%80%) Total Jitter Deterministic Jitter 1.25G 1.0625G 1.25G 1.0625G
ns UI
2
3 UI 4 mV V V V V nm dBm dBm dB 6 5
Output Optical Eye Data Input Swing Differential Input Differential Impedance TX Disable TX Fault Disable Enable Fault Normal C ZIN
VIN
1660 150 160 Vcc+0.3 0.8 Host_Vcc+0.3 0.5 1310 1650
-22
Centre Wavelength Receiver Sensitivity Receiver Overload Return Loss
LOS De-Assert
1200 -3 12
LOSD LOSA
-23
dBm dBm dB mV UI 3 UI V V 5
LOS Assert LOS Hysteresis Data Output Swing Differential Total Jitter Deterministic Jitter LOS Note: 1.25G 1.0625G 1.25G 1.0625G High Low
-35 1 4 2000 0.749 0.61 0.462 0.36 Host_VCC-0.5 0 Host_Vcc+0.3 0.5 370
VOUT TJ DJ
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 4 of 4 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM
1.25G GBIC Transceiver Up to 20 km transmission, RoHS compliant June ,15 2006
1. 2. 3. 4. 5. 6.
The optical power is launched into SMF. Unfiltered, measured with a PRBS 27-1 test pattern @1.25Gbps Measured with a PRBS 27 -1 test pattern@1.25Gbps, meet the specified maximum output jitter requirements if the specified maximum input jitter is present. Measured with a PRBS 27 -1 test pattern@1.25Gbps. PECL level, internally AC coupled and terminated. Worst-case Extinction Ration, measured with a PRBS 27 -1 test pattern@1.25Gbps, BER1x 10-12.
EEPROM Information
The SFF-8053 defines a 256-byte memory map in EEPROM describing the transceiver's capabilities, standard interfaces, manufacturer, and other information, which is accessible over a 2 wire serial interface at the 8-bit address 1010000X (A0h). The memory contents refer to Table 6 Table 6 - EEPROM Serial ID Memory Contents (A0h) Addr. 0 1 2 3--10 11 12 13 14 15 16 17 18 19 20--35 36 37--39 40--55 56--59 60-62 63 64--65 66 Field Size (Bytes) 1 1 1 8 1 1 1 1 1 1 1 1 1 16 1 3 16 4 3 1 2 1 Name of Field Identifier Connector Transceiver Encoding BR, nominal Reserved Length (9um)-km 01 01 00 00 00 02 12 00 0D 01 01 0D 00 xx xxkm 550m
550m
Hex
Description GBIC MOD4 SC Transmitter Code 8B10B 1.25Gbps
Ext. Identifier 04
Length (9um) 64 Length (50um) 37 Length (62.5um) 37 Length (copper) 00 Reserved Vendor name Reserved Vendor OUI Vendor PN Vendor rev Reserved CC BASE Options BR, max 00 46 49 42 45 52 58 4F 4E 20 49 4E 43 2E 20 20 20 00 00 00 00 46 54 4D 2D 33 30 31 32 53 2D 47 xx xx 47 20 20 xx xx xx xx 00 00 00 xx 00 1A 00 Check sum of bytes 0 - 62 LOS, TX_FAULT and TX_DISABLE "FTM-3012S-GxxG " (ASC) ASC( "31 30 20 20" means 1.0 revision) "FIBERXON INC. "(ASC)
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 5 of 5 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM
1.25G GBIC Transceiver Up to 20 km transmission, RoHS compliant June ,15 2006
67 68--83
1 16
BR, min Vendor SN Vendor date code Reserved CC_EXT Vendor specific
00 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx 20 20 00 xx Check sum of bytes 64 - 94 ASC Year (2 bytes), Month (2 bytes), Day (2 bytes)
84--91 92--94 95 96--255
8 1 1 160
Note: The "xx" byte should be filled in according to practical case. For more information, please refer to the related document of SFF-8053 Rev 5.5.
Recommended Interface Circuit
Figure 1 shows the recommended interface circuit.
Host Board
Vcc
2x4.7K to 10K
TX Disable TX Fault SerDat Out +
GBIC Module
Vcc
10K
Z=75
TD +
SerDat Out -
Z=75
TD -
Laser driver
Protocol IC
SERDES IC
SerDat In +
Z=75
RD +
SerDat In -
Z=75
Amplifier
RD -
LOS
Vcc
3x4.7K to 10K
MOD-DEF2 MOD-DEF1 MOD-DEF0
EEPROM
RGND
Figure 1, Recommended Interface Circuit
Pin Definitions
Figure 2 below shows the pin numbering of GBIC electrical interface. The pin functions are described in Table
7.
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 6 of 6 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM
1.25G GBIC Transceiver Up to 20 km transmission, RoHS compliant June ,15 2006
Figure 2, Pin View
Table 7 - Pin Function Definitions Pin Name Pin # Name/Function RECEIVER SIGNALS Signal Specification
RGND VDDR -RX_DAT +RX_DAT
2, 3, 11, 14 15 12 13
Receiver Ground (may be connected with TGND in GBIC) Receiver +3.3/5 volt (may be connected with VDDT in GBIC)
Receive Data, Differential PECL
Ground, to GBIC Power, to GBIC
High speed serial, from GBIC High speed serial, from GBIC Low speed, from GBIC
Receive Data, Differential PECL Receiver Loss of Signal, logic high, open collector compatible, 4.7k to 10kpull up to VDDT on host
TRANSMITTER SIGNALS
RX_LOS
1
TGND VDDT +TX_DAT -TX_DAT
8, 9, 17, 20 16 18 19
Transmitter Ground (may be connected with RGND internally) Transmitter +3.3/5 volt (may be connected with VDDR in GBIC)
Transmit Data, Differential PECL
Ground, to GBIC
Power, to GBIC High speed serial, to GBIC High speed serial, to GBIC Low speed, to GBIC
Transmit Data, Differential PECL Transmitter Disable, logic high, open collector compatible, 4.7k to 10K pull up to VDDT on GBIC Transmitter Fault, logic high, open collector compatible, 4.7k to 10k pull up to VDDT on host
CONTROL SIGNALS
TX_DISABLE
7
TX_FAULT
10
Low speed, from GBIC
MOD_DEF(0)
4
TTL low, output
MOD_DEF(1) MOD_DEF(2)
5 6
SCL serial clock signal, input SDA serial data signal, input/output
Please reference SFF-8053, Annex D: Module definition "4"
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 7 of 7 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM
1.25G GBIC Transceiver Up to 20 km transmission, RoHS compliant June ,15 2006
Mechanical Design Diagram
The mechanical design diagram is shown in Figure 3
27.95 11.90 9.90 30.30 25.50 30.50 33.20 12.75 37.48
3.05 1.70
12.99
57.30
8.30
Figure 3, Mechanical Design Diagram of GBIC (1310nm)
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 8 of 8 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM
65.60
1.25G GBIC Transceiver Up to 20 km transmission, RoHS compliant June ,15 2006
Ordering information
FTM
3
0
1
2
S
G
x
x
G
Wavelength 3: 1310nm Function 0: Standard Data rate 12: 1.25Gbps Note: The "Distance" bit may be omitted when it is "10"
Package G: GBIC Receptable S: SC
Distance 10: 10km 20: 20km
Others G: RoHS compliance
Part No.
Product Description 1310nm, 1.0625~1.25Gbps, 10km, GBIC, RoHS compliant, 0C~+70C 1310nm, 1.0625~1.25Gbps, 20km, GBIC, RoHS compliance, 0C~+70C
FTM-3012S-GG FTM-3012S-G20G
Related Documents
For further information, please refer to the following documents: FlexonTM GBIC Installation Guide FlexonTM GBIC Application Notes SFF-8053, Proposed Specification for GBIC (Gigabit Interface Converter), Rev 5.5
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 9 of 9 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM
1.25G GBIC Transceiver Up to 20 km transmission, RoHS compliant June ,15 2006
Obtaining Document
You can visit our website: http://www.fiberxon.com
Or contact with Fiberxon, Inc. America Sales Office listed at the end of documentation to get the latest documents.
Revision History
Revision Rev. 1a Rev. 1b Initiate Univer yang Henry xiao Review Simon.jiang Simon.jiang Approve Simon.jiang Simon.jiang Subject Initialize datasheet Add FTM-3012S-G20G
Release Date April 15, 2006
June 15, 2006
(c) Copyright Fiberxon Inc. 2006
All Rights Reserved. All information contained in this document is subject to change without notice. The products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. The information contained in this document does not affect or change Fiberxon's product specifications or warranties. Nothing in this document shall operate as an express or implied license or indemnity under the intellectual property rights of Fiberxon or third parties. All information contained in this document was obtained in specific environments, and is presented as an illustration. The results obtained in other operating environment may vary. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS. In no event will Fiberxon be liable for damages arising directly from any use of the information contained in this document. Contact U.S.A. Headquarter: 5201 Great America Parkway, Suite 340 Santa Clara, CA 95054 U. S. A. Tel: 408-562-6288 Fax: 408-562-6289 Or visit our website: http://www.fiberxon.com
Fiberxon Proprietary and Confidential, Do Not Copy or Distribute Page 10 of 10 Controlled Electronic Version. 24hrs Obsolete when printed out without authorization. Last printed 6/27/2006 4:31 PM

▲Up To Search▲

Price & Availability of FTM-3012S-G20G

	To Download FTM-3012S-G20G Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .