 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS CW 0626 FPLD54TEG 155.52M SURFACE MOUNT 3.3V LVPECL CLOCK ABSOLUTE M AXIMUM RATING S PARAMETER Storage Temperature Supply Voltage (Vcc) UNITS MINIMUM -55 -0.5 NOMINAL MAXIMUM 125 7.0 UNITS C Vdc TABLE 2.0 MINIMUM (Fo) 16.384 -20 0 3.135 NOMINAL 3.3 -45 -80 -110 -135 -145 MAXIMUM 200 20 70 3.465 60 5 1 UNITS MHz ppm C Vdc mA pS RMS pS RMS dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz NOTE 1 TABLE 1.0 NOTE FPLD54TEG DESCRIPTION OPERATING SPECIFIC ATIONS PARAMETER Center Frequency Total Frequency Tolerance Operating Temperature Range Supply Voltage Supply Current Jitter (BW=10Hz to 20MHz) Jitter (BW=12kHz to 20MHz) SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset (Vcc) (Icc) The Connor-Winfield FPLD54TEG is a fixed frequency, surface mount Crystal Controlled Oscillator (XO) designed for applications requiring low jitter and a 20ppm overall stability. Operating at 3.3V supply voltage, the FPLD54TEG provides LVPECL Differential Outputs with Enable/Disable function. INPUT CHARACTERISTICS PARAMETER Disable Input Voltage (High) Enable Input Voltage (Low) (Vih) (Vil) MINIMUM 2.275 NOMINAL TABLE 3.0 - MAXIMUM 1.68 UNITS Vdc Vdc NOTE 2 2 TABLE 4.0 FEATURES 3.3V OPERATION LVPECL OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage Duty Cycle Rise / Fall Time 20% to 80% Startup Time (High) (Low) (Voh) (Vol) MINIMUM 2.275 45 NOMINAL 50 MAXIMUM 50 1.68 55 1 10 UNITS Ohms Vdc Vdc % ns ms NOTE 3 LVPECL DIFFERENTIAL OUTPUTS ENABLE / DISABLE FUNCTION LOW JITTER <1pS RMS OVERALL FREQUENCY TOLERANCE: 20ppm TEMPERATURE RANGE: 0 to 70C 4 PACKAG E CHARACTERISTICS Package TABLE 5.0 Non-hermetic package consisting of an FR4 substrate with grounded metal cover. TABLE 6.0 See solder profile page2. Ultrasonic cleaning is not recommended. SURFACE MOUNT PACKAGE TAPE AND REEL PACKAGING RoHS COMPLIANT / LEAD FREE ORDERING INFORMATION PROCESS RECOMMENDATIONS Solder Process Wash Notes 1) Includes initial tolerance, deviation over temperature, supply and load variations, shock, vibration and 20 years aging. 2) When the oscillator is disabled, the true output is in a low state (Vol) and the complementary output is in the high state (VoH). 3) Output must be terminated into 50 ohms to Vcc - 2V or Thevenin equivalent. 4) Duty Cycle measured at 1.977V FPLD54TEG - 155.52MHz CLOCK SERIES CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: INT Ec235 PAGE 1 OF 2 REV: 00 DATE: 06/28/06 aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS Package Outline Suggested Pad Layout CW FPLD54TEG 155.52M Dimensional Tolerance: .005" (.127mm) Output Waveform 260C 220C Solder Profile Temperature 260C 80% 180C 150C 120C 50% 0 120 S Max. Time 10 S 60 S Max. 360 Sec. Max. 20% Test Circuit Pin Connections 2 E/D N/C Vcc = Vcc2 = 3.3Vdc ENABLE / DISABLE N/C GROUND Q OUTPUT Q OUTPUT Vcc Specifications subject to change without notice. DATA SHEET #: INT Ec235 PAGE 2 OF 2 REV: 00 DATE: 06/28/06 aCopyright 2001 Connor-Winfield all rights reserved. |
Price & Availability of FPLD54TEG-15552M
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |