 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HMC814LC3B v00.1009 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 13 - 24.6 GHz OUTPUT Typical Applications Features High Output Power: +17 dBm Low Input Power Drive: 0 to +6 dBm Fo Isolation: >20 dBc @ Fout = 19 GHz 100 kHz SSB Phase Noise: -136 dBc/Hz Single Supply: +5V @ 88mA 12 Lead 3x3mm SMT Package: 9mm2 7 FREQ. MULTIPLIERS - ACTIVE - SMT The HMC814LC3B is ideal for: * Clock Generation Applications: SONET OC-192 & SDH STM-64 * Point-to-Point & VSAT Radios * Test Instrumentation * Military & Space * Sensors Functional Diagram General Description The HMC814LC3B is a x2 active broadband frequency multiplier utilizing GaAs PHEMT technology in a leadless RoHS compliant SMT package. When driven by a +4 dBm signal, the multiplier provides +17 dBm typical output power from 13 to 24.6 GHz. The Fo, 3Fo and 4Fo isolations are >20 dBc at 19 GHz. The HMC814LC3B is ideal for use in LO multiplier chains for Pt-to-Pt & VSAT Radios yielding reduced parts count vs. traditional approaches. The low additive SSB Phase Noise of -136 dBc/Hz at 100 kHz offset helps maintain good system noise performance. The RoHS packaged HMC814LC3B eliminates the need for wire bonding, and allows the use of surface mount manufacturing techniques. Electrical Specifi cations, TA = +25 C, Vdd1, Vdd2 = +5V, +4 dBm Drive Level Parameter Frequency Range, Input Frequency Range, Output Output Power Fo Isolation (with respect to output level) 3Fo Isolation (with respect to output level) Input Return Loss Output Return Loss SSB Phase Noise (100 kHz Offset @ Input Frequency = 19 GHz) Supply Current (Idd1 & Idd2) 70 14 Min. Typ. 6.5 - 12.3 13 - 24.6 17 25 25 10 12 -136 88 100 Max. Units GHz GHz dBm dBc dBc dB dB dBc/Hz mA 7 - 124 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC814LC3B v00.1009 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 13 - 24.6 GHz OUTPUT Output Power vs. Temperature @ +4 dBm Drive Level 20 Output Power vs. Drive Level 25 7 0 dBm 1 dBm 2 dBm 3 dBm 4 dBm 5 dBm 6 dBm OUTPUT POWER (dBm) OUTPUT POWER (dBm) 16 15 12 5 8 +25C +85C -40C -5 4 -15 0 12.5 14.5 16.5 18.5 20.5 22.5 24.5 26.5 -25 12.5 14.5 16.5 18.5 20.5 22.5 24.5 26.5 FREQUENCY (GHz) FREQUENCY (GHz) Output Power vs. Supply Voltage @ +4 dBm Drive Level 20 Isolation @ +4 dBm Drive Level 20 OUTPUT POWER (dBm) OUTPUT POWER (dBm) 16 10 12 0 Fo 2Fo 3Fo 4Fo 8 4.5V 5.0V 5.5V -10 4 -20 0 12.5 14.5 16.5 18.5 20.5 22.5 24.5 26.5 -30 12.5 14.5 16.5 18.5 20.5 22.5 24.5 26.5 FREQUENCY (GHz) FREQUENCY (GHz) Output Power vs. Input Power 20 15 OUTPUT POWER (dBm) 10 5 0 -5 -10 -15 -20 0 1 2 3 4 5 6 7 8 9 10 15 GHz 19 GHz 23 GHz 24 GHz INPUT POWER (dBm) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 125 FREQ. MULTIPLIERS - ACTIVE - SMT HMC814LC3B v00.1009 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 13 - 24.6 GHz OUTPUT Input Return Loss vs. Temperature Output Return Loss vs. Temperature 0 +25C +85C -40C 7 RETURN LOSS (dB) 0 -5 -5 FREQ. MULTIPLIERS - ACTIVE - SMT -10 RETURN LOSS (dB) 12 13 -10 -15 +25C +85C -40C -15 -20 -25 -20 -30 6 7 8 9 10 11 -25 12.5 14.5 16.5 18.5 20.5 22.5 24.5 26.5 FREQUENCY (GHz) FREQUENCY (GHz) Phase Noise @ 19 GHz -10 -30 PHASE NOISE (dBc/Hz) -50 -70 -90 -110 -130 -150 -170 2 10 10 3 10 4 10 5 10 6 10 7 10 8 FREQUENCY (Hz) 7 - 126 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC814LC3B v00.1009 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 13 - 24.6 GHz OUTPUT Absolute Maximum Ratings RF Input (Vdd = +5V) Supply Voltage (Vdd1, Vdd2) Channel Temperature Continuous Pdiss (T= 85 C) (derate 8.3 mW/C above 85 C) Thermal Resistance (channel to ground paddle) Storage Temperature Operating Temperature +10 dBm +5.5 Vdc 175 C 743 mW 121 C/W -65 to +150 C -40 to +85 C Typical Supply Current vs. Vdd Vdd (Vdc) 4.5 5.0 5.5 Idd (mA) 87 88 7 FREQ. MULTIPLIERS - ACTIVE - SMT 7 - 127 89 Note: Multiplier will operate over full voltage range shown above. ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC814LC3B v00.1009 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 13 - 24.6 GHz OUTPUT Pin Description 7 FREQ. MULTIPLIERS - ACTIVE - SMT Pin Number Function Description Package bottom must also be connected to RF/DC ground. Interface Schematic 1, 3, 7, 9 GND 2 RFIN This pin is AC coupled and matched to 50 Ohms. These pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/ DC ground. This pin is AC coupled and matched to 50 Ohms. 4 - 6, 11 N/C 8 RFOUT 10, 12 Vdd2, Vdd1 Supply voltage 5V 0.5V. External bypass capacitors of 100 pF, 1,000 pF and 2.2 F are recommended. Application Circuit Component C1, C2 C3, C4 C5, C6 Value 100 pF 1,000 pF 2.2 F 7 - 128 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC814LC3B v00.1009 SMT GaAs MMIC x2 ACTIVE FREQUENCY MULTIPLIER, 13 - 24.6 GHz OUTPUT Evaluation PCB 7 FREQ. MULTIPLIERS - ACTIVE - SMT List of Materials for Evaluation PCB 112409 [1] Item J1, J2 J3 - J5 C1, C2 C3, C4 C5, C6 U1 PCB [2] Description PCB Mount SRI K Connector DC Pin 100 pF Capacitor, 0402 Pkg. 1,000 pF Capacitor, 0603 Pkg. 2.2 F Tantalum Capacitor HMC814LC3B x2 Active Multiplier 111173 Eval Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon 25FR The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 129 |
Price & Availability of HMC814LC3B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |