|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
H HiTRON UNIVERSAL INPUT AC-DC OPEN FRAME SINGLE & TRIPLE OUTPUT 63 WATTS INTERNAL SWITCHING POWER SUPPLIES HVI63 SERIES FEATURES: ACCOMMODATE UNIVERSAL AC SOURCES COMPACT 4"x2"x1"PCB FORMAT MEET UNIVERSAL SAFETY STANDARDS EMI MEET CISPR PUB. 22 & FCC CLASS B CE MARKING COMPLIANCE SPECIFICATION INPUT SPECIFICATION Input Voltage: Range typ. 90-264Vac. Rating 100 to 240Vac. Input Connector: V-M connector. Input Frequency: 47-63Hz. Inrush Current: 12.0A rms @ cold start @230Vac. Input Current: Typ. 0.9A@115Vac, 0.435A@230Vac. Dielectric Withstand: Meet IEC 60950-1. EMI: Meet CISPR PUB. 22 & FCC Class B. Hold-up Time: Typ. 11.2mS @115Vac, 72.mS @ 230Vac. Earth Leakage: Less than 0.42mA @230Vac. OUTPUT SPECIFICATION Output Voltage: See Ratings Chart. Output Current: See Ratings Chart. Output Connector: V-M connector. Output Wattage: Typ. 62 watts. Line Regulation: Typ. 0.1%. Load Regulation: Main VO1 typ. 1.0%. Aux. VO2 typ. 3-8.0%. Aux. VO3 typ. 3.0%. Noise & Ripple: Typ. 1.0% peak to peak. OVP: Built-in at main output VO1(Latch). Adjustability: Not available. Overload Protection (OLP): Fully protected against outputs overload and short circuit. Typ. OLP set at 105-120% of rating output power. Consult the factory for OLP setting. Operating Temperature: 0 to +50 C under forced air flow for full load. Derate by 1.3W/C from 40C to 50C. Storage Temperature: -20 to +85C. Temperature Coefficient: Typ. 0.04%/C. Cooling: At least 5 cfm direct forward air flow is required to achieve full rating power. Construction: 4"x2"x1" PCB format. GENERAL SPECIFICATION Efficiency: Typ. 80-89.5 %. (Various with output voltage). Switching Frequency: 130KHz or 70K Hz. Circuit Topology: Fixed frequency forward circuit for triple output and 5V/3.3V of single output. Fixed frequency flyback circuit for high voltage of single output. Transient Response: Output voltage returns in less than 0.5mS following a 50% load change. Safety Standard: IEC 60950-1 Class I. Power Density: 7.7Watts / Cubic Inch. Note: Due to requests in market and advances in technology, specifications subject to change without notification. -21- For the details of safety approval, please consult the factory. OUTPUT VOLTAGE / CURRENT RATINGS CHART SINGLE OUTPUT MODEL NO. MAIN VO1 Min. Typ. Volt. Max. Peak 3.3V 10.00A 12.0A 5.0V 10.00A 12.0A 5.00A 4.00A 2.50A 1.25A 6.0A 5.0A 3.0A 1.3A HVI63-S033100 0.2A 10.00A HVI63-S050100 0.2A 10.00A HVI63-S120050 0.0A 5.00A 12.0V HVI63-S150040 0.0A 4.00A 15.0V HVI63-S240025 0.0A 2.50A 24.0V HVI63-S480125 0.0A 1.25A 48.0V TRIPLE OUTPUT MODEL NO. HVI63-T050II HVI63-T050MI HVI63-T050KK HVI63-T033EI MAIN +VO1 Min. 0.5A 0.5A 0.5A 0.5A Typ. Volt. Max. 8A 8A 8A 8A Peak 10A 10A 10A 10A Min. 0.1A 0.1A 0.1A 0.1A 6.0A +5.0V 6.0A +5.0V 6.0A +5.0V 8.0A +3.3V AUX. +VO2 Typ. 2.2A 1.1A 1.8A 3.0A Volt. +12V +24V +15V + 5V Max. 3.0A 1.5A 2.5A 3.0A Peak 4A 2A 3A 4A Min. 0A 0A 0A 0A AUX. -VO3 Typ. 0.5A 0.5A 0.5A 0.5A Volt. -12V -12V -15V -12V Max. 0.5A 0.5A 0.5A 0.5A Peak 1A 1A 1A 1A Symbol: "" OVP built-in. "" Couple common choke. MECHANICAL DIMENSIONS: MM [INCHES] WEIGHT: 121g (4.27 Oz.) SINGLE OUTPUT TRIPLE OUTPUT INPUT & OUTPUT CONNECTORS PIN ASSIGNMENT AC INPUT ASSIGNMENT AC-L AC-N AC-G P1-L P1-N G CNTR/PIN# Mating connector: P1,2 Molex # 5195 or 5239 series. SINGLE OUTPUT VO1 DC COM P2-1,2 P2-3,4 VO1 P2-1,2 TRIPLE OUTPUT VO2 VO3 P2-6 P2-5 DC COM P2-3,4 -22- |
Price & Availability of HVI63-S033100 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |