|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HMC744LC3C v01.1208 13 Gbps, FAST RISE TIME 1:2 FANOUT BUFFER w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Typical Applications The HMC744LC3C is ideal for: * RF ATE Applications Features Inputs Terminated Internally in 50 Ohms Differential & Single-Ended Operation Propagation Delay: 120 ps Fast Rise and Fall Times: 22 / 20 ps Programmable Differential Output Voltage Swing: 600 - 1100 mV Low Power Consumption: 287 mW typ. Single Supply: +3.3V 16 Lead Ceramic 3x3mm SMT Package: 9mm 2 7 HIGH SPEED LOGIC - SMT * Broadband Test & Measurement * Serial Data Transmission up to 13 Gbps * Clock Buffering up to 13 GHz Functional Diagram General Description The HMC744LC3C is a 1:2 Fanout Buffer designed to support data transmission rates up to 13 Gbps, and clock frequencies as high as 13 GHz. The HMC744LC3C also features an output level control pin, VR, which allows for loss compensation or for signal level optimization. All input and output signals to the HMC744LC3C are terminated with 50 Ohms to Vcc on-chip, and may be either AC or DC coupled. Inputs or outputs can be connected directly to a 50 Ohm to Vcc terminated system, while DC blocking capacitors may be used if the terminating system is 50 Ohms to ground. The HMC744LC3C operates from a single +3.3V DC supply, and is available in a ceramic RoHS compliant 3x3 mm SMT package. Electrical Specifi cations, TA = +25C Vcc = +3.3V Parameter Power Supply Voltage Power Supply Current Maximum Data Rate Maximum Clock Rate Input High Voltage Input Low Voltage Input Return Loss Output Amplitude Differential, peak-to-peak Output High Voltage Output Low Voltage Output Rise / Fall Time Single-Ended, 20% - 80% 1100 3.25 2 22 / 20 mVpp V V ps Frequency <13 GHz Single-Ended, peak-to-peak 2.8 2.1 10 550 Conditions Min. 3.0 Typ. 3.3 87 13 13 3.8 3.3 Max 3.6 Units V mA Gbps GHz V V dB mVpp 7 - 138 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC744LC3C v01.1208 13 Gbps, FAST RISE TIME 1:2 FANOUT BUFFER w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Electrical Specifi cations, (continued) Parameter Output Return Loss Small Signal Gain Random Jitter JR Deterministic Jitter, JD Propagation Delay, td D1 to D2 Data Skew, tSKEW [1] Deterministic jitter measured at 13 GHz with a 300 mVpp, 215 -1 PRBS input sequence. rms - , 215 -1 PRBS input [1] 2 120 0 Conditions Frequency <13 GHz Min. Typ. 10 27 0.2 6 Max Units dB dB ps rms ps ps ps 7 HIGH SPEED LOGIC - SMT 7 - 139 DC Current vs. Supply Voltage [1] [2] 110 105 100 DC CURRENT (mA) 95 90 85 80 75 70 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 +25C +85C -40C Output Differential vs. Supply Voltage [1] [2] 1200 DIFFERENTIAL VOLTAGE (mV) 1175 1150 1125 1100 1075 1050 1025 1000 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 +25C +85C -40C SUPPLY VOLTAGE (V) SUPPLY VOLTAGE (V) Rise / Fall Time vs. Supply Voltage [1] [2] 25 Output Differential vs. Frequency [1] 1400 OUTPUT DIFFERENTIAL (mV) 1200 1000 800 600 400 2 23 RISE/FALL TIME (ps) 21 19 17 15 2.9 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 SUPPLY VOLTAGE (V) tr tf 4 6 8 10 12 FREQUENCY (GHz) 14 16 18 [1] VR = +3.3V [2] Frequency = 13 GHz For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC744LC3C v01.1208 13 Gbps, FAST RISE TIME 1:2 FANOUT BUFFER w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Output Differential vs. VR [2] 110 105 +25C +85C -40C Rise / Fall Time vs. VR [2] 25 tr tf DC CURRENT (mA) 95 90 85 80 75 70 2.9 RISE/FALL TIME (ps) 3 3.1 3.2 3.3 3.4 3.5 3.6 3.7 7 HIGH SPEED LOGIC - SMT 100 23 21 19 17 15 2.1 2.3 2.5 2.7 2.9 VR (V) 3.1 3.3 3.5 3.7 SUPPLY VOLTAGE (V) Input Return Loss vs. Frequency 0 -5 Output Return Loss vs. Frequency 0 -5 -10 -15 -20 -25 -30 -35 0 RETURN LOSS (dB) -15 -20 -25 -30 0 2 4 6 8 10 12 14 FREQUENCY (GHz) RETURN LOSS (dB) -10 2 4 6 8 10 12 14 FREQUENCY (GHz) [1] VR = +3.3V [2] Frequency = 13 GHz 7 - 140 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC744LC3C v01.1208 13 Gbps, FAST RISE TIME 1:2 FANOUT BUFFER w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Eye Diagram [1] Test Conditions: Pattern generated with an Agilent N4903A Serial BERT. Eye Diagram presented on a Tektronix CSA 8000. Device input = 13 Gbps PN code. Both output channels shown. Device is AC coupled to scope 7 HIGH SPEED LOGIC - SMT Timing Diagram Truth Table Input DIN L H Notes: DIN = DINP - DINN D1 = D1P - D1N D2 = D2P - D2N D1 L H H - Positive differential voltage L - Negative differential voltage Outputs D2 L H For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 141 HMC744LC3C v01.1208 13 Gbps, FAST RISE TIME 1:2 FANOUT BUFFER w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Absolute Maximum Ratings Power Supply Voltage (Vcc) Input Signals Output Signals -0.5V to +3.7V Vcc - 2V to Vcc + 0.5V +1V to +3.7V -65C to +150C -40C to +85C ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS 7 HIGH SPEED LOGIC - SMT Storage Temperature Operating Temperature Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS MUST BE SOLDERED TO PCB RF GROUND. 7. PADDLE MUST BE SOLDERED TO GND. 7 - 142 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC744LC3C v01.1208 13 Gbps, FAST RISE TIME 1:2 FANOUT BUFFER w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Pin Descriptions Pin Number 1, 4, 5, 8, 9, 12 Function GND Description Signal Grounds Interface Schematic 7 2, 3 Clock / Data Output Port 1 6, 7 DINP, DINN Clock / Data Inputs 10, 11 D2N D2P Clock / Data Output Port 2 13, 16 14, Package Base Vcc GND Positive Supply Supply Ground Output level control. Output level may be adjusted by applying a voltage to VR per "Output Differential vs. VR" plot. 15 VR For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 143 HIGH SPEED LOGIC - SMT D1P, D1N HMC744LC3C v01.1208 13 Gbps, FAST RISE TIME 1:2 FANOUT BUFFER w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Evaluation PCB 7 HIGH SPEED LOGIC - SMT Item J1 J2 J3 J4 J5 J6 J7 J8 J9 Description D1P D1N DINP DINN D2N D2P GND VR Vcc List of Materials for Evaluation PCB 122517 [1] Item J1 - J6 J7 - J9 JP1 C1, C2 C3 - C5 R2 U1 PCB [2] Description PCB Mount SMA RF Connectors DC Pin Shorting Jumper 4.7 F Capacitor, Tantalum 100 pF Capacitor, 0402 Pkg. 10 Ohm Resistor, 0603 Pkg. HMC744LC3C High Speed Logic, Fanout Buffer 122515 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Arlon 25FR The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. The exposed packaged base should be connected to GND. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. 7 - 144 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC744LC3C v01.1208 13 Gbps, FAST RISE TIME 1:2 FANOUT BUFFER w/ PROGRAMMABLE OUTPUT VOLTAGE & POSITIVE SUPPLY Application Circuit 7 HIGH SPEED LOGIC - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 7 - 145 |
Price & Availability of HMC744LC3C |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |