|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MD54-0005 Low Cost MMIC Mixer 800 - 1000 MHz Features * * * * * * Input Power @ 1 dB Compression: +15 dBm High LO to RF Isolation: 35 dB LO Drive Level: +3 to +8 dBm DC - 200 MHz 3 dB IF Bandwidth Does not require DC bias Ultra-Miniature SOT-25 Plastic Package 3 2 Rev. V4 Functional Schematic C1 L1 R1 Description M/A-COM's MD54-0005 is a passive mixer that achieves the performance of a double balanced diode mixer in an ultra-miniature SOT-25 package. The MD54-0005 is ideally suited for use where high level RF signals and very wide dynamic range are required. Typical applications include frequency up/ down conversion, modulation, and demodulation in receivers and transmitters for basestation and portable systems. The MD54-0005 employs GaAs FETs as mixing elements to achieve a very wide dynamic range in a low cost plastic pack-age. The mixer operates with LO drive levels of +3 dBm to +8 dBm. The LO port may be externally tuned for operation in various frequency bands. M/A-COM's GaAs IC is fabricated using a mature 0.5 micron gate length GaAs MESFET process. The process features full passivation for increased performance and reliability. 1 4 5 Pin Configuration Pin No. 1 2 3 Function LO GND GND Pin No. 4 5 Function RF IF External Circuitry Parts List 2 Ref. Designation LO = 840 MHz 820 Ohms 22 nH 3.3 pF Ordering Information 1 Part Number MD54-0005 MD54-0005TR MD594-0005SMB LO = 900 MHz 820 Ohms 18 nH 4 pF Package Bulk Packaging 1000 piece reel Designers Kit R1 L1 C1 1. Reference Application Note M513 for reel size information. 2. All off-chip components are low-cost surface mount components obtainable from multiple sources. (.060 in x .030 in or x .050 in) 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MD54-0005 Low Cost MMIC Mixer 800 - 1000 MHz Rev. V4 Electrical Specifications: RF=900 MHz (-10 dBm), LO=840 MHz (+5 dBm), IF=60 MHz, TA = 25C Parameter Conversion Loss Isolation Test Conditions -- LO to RF LO to IF RF to IF RF Port LO Port3 IF Port RF Freq. = 900 MHz, LO = +5 dBm Two tones at -10 dBm each, Tone spacing 100 kHz, IF = 60 MHz Units dB dB dB dB Ratio Ratio Ratio dBm dBc Min -- 25 -- -- -- -- -- -- -- Typ 8.0 35 25 20 2.0:1 2.0:1 2.0:1 15 55 Max 9.0 -- -- -- -- -- -- -- -- VSWR Input 1 dB Compression Two-Tone IM Ratio4 3. With external LO Port matching. See functional block diagram. 4. IMR vs. RF Drive can be calculated by the formula: IMR = 40-1.5* PIN Absolute Maximum Ratings 5 Parameter RF Input Power 6 Low Drive Power 6 Storage Temperature Operating Temperature Spurious Table 4x 3x Harmonic of LO 2x 1x 0x 23.0 10.6 34.1 21.3 17.7 6.6 14.3 4.0 X X 36.5 39.9 21.6 21.8 44.0 44.8 0 0 13.9 13.4 53.8 56.1 53.9 57.6 51.6 55.5 57.0 57.6 50.2 53.1 63.8 58.3 53.4 59.3 65.2 58.4 63.7 56.3 59.1 56.5 68.6 58.8 67.3 57.2 66.2 56.3 67.0 56.9 67.2 57.1 Absolute Maximum +27 dBm +27 dBm -65C to +150C -40C to +85C 5. Exceeding any one or combination of these limits may cause permanent damage to this device. 6. Ambient Temperature (TA ) = +25C. 0x 1x 2x 3x 4x SOT-25 Plastic Package Harmonic of RF The spurious table shows the spurious signals resulting from the mixing of the RF and LO input signals, assuming down conversion. Mixing products are indicated relative to the IF. The lower frequency mixing term is shown for two different RF input levels. The top number is for an RF input power of 0 dBm, the lower number is for -10 dBm. |nFRF - mFLO |, RF = 0 dBm |nFRF - mFLO |, RF = -10 dBm RF Frequency = 900 MHz LO Frequency = 840 MHz 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MD54-0005 Low Cost MMIC Mixer 800 - 1000 MHz Recommended PCB Configuration Layout View Cross Section View Rev. V4 The PCB dielectric between RF traces and RF ground layers should be chosen to reduce RF discontinuities between 50 lines and package pins. M/A-COM recommends an FR-4 dielectric thickness of 0.008" (0.2 mm) yielding a 50 line width of 0.015" (0.38 mm). The recommended metalization thickness is 1 oz. copper. Designer's Kit MD54-005SMB The MD54-0005SMB Designer's Kit allows for immediate evaluation of M/A-COM's MD54-0005. The evaluation board consists of an MD54-0005, recommended external surface mount circuitry, and RF connectors, all mounted to a multi-layer FR-4 PCB. Other items included in the Designer's Kit are a floppy disk (with typical performance data and a DXF file of the recommended PCB layout) and any additional Application Notes. The MD54-0005SMB evaluation PCB and block diagram are illustrated below with all functional ports labeled. Mixer PCB Evaluation PCB & RF Connector Losses Port Reference RF Port LO Port IF Port Approximate RF Loss 0.10 dB @ 900 MHz 0.10 dB @ 900 MHz 0.05 dB @ 60 MHz 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MD54-0005 Low Cost MMIC Mixer 800 - 1000 MHz Typical Performance Curves 7,8 Conversion Loss vs. Frequency 11.0 10.5 10.0 Rev. V4 VSWR vs. Frequency 5.0 4.5 4.0 3.5 RF LO 9.5 9.0 8.5 8.0 3.0 2.5 2.0 1.5 1.0 7.5 7.0 800 0.5 0.0 800 850 900 950 1000 850 900 950 1000 RF Frequency (MHz) RF Frequency (MHz) Two-Tone IMR vs. Frequency 70 65 RF = -10dBm each tone Isolation vs. Frequency 50 45 40 35 LO to RF LO to IF RF to IF 60 55 50 45 40 35 30 800 30 25 20 15 10 5 850 900 950 1000 0 800 850 900 950 1000 RF Frequency (MHz) RF Frequency (MHz) 7. Test Conditions for Down Converter Application: RF=900 MHz (-10 dBm), IF=60 MHz, LO=840 MHz (+5 dBm), LO Port match shown herein. 8. Test Conditions for Up Converter Application: LO=840 MHz (+5 dBm), IF=60 MHz (-10 dBm), RF=900 MHz, LO Port match shown herein. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of MD594-0005SMB |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |